100% Stacked Bar Chart

100% Stacked Bar Chart allows you to compare multiple measures through bars stacked one after the other horizontally.

Stacked Bar Chart 100

How to configure the flat table data to 100% Stacked Bar Chart?

100% Stacked Bar Chart need a minimum of 1 value element and 1 column element to showcase. The measure or expression field that you would like to analyze can be dropped into Value(s) block. The dimension that you would like to categorize the measure, can be dropped onto Column block. If you would like to categorize based on a series, then the respective dimension can be dropped onto Row block in addition.

Follow the steps to configure data to 100% stacked bar chart.

Drag and drop the 100% stacked bar chart into canvas and resize it your required size.

Drag and drop the 100 stacked bar chart

Connect to data source.

Focus on the 100% stacked bar chart and click on Assign Data.

Assign Data

The data pane will be opened with available Measures and Dimensions from the connected data source.

Data pane

Assigning Value(s)

Drag and drop the Measure into Value.

Drag and drop the Measure

Now the chart will be rendered like this.

chart illustration

You can change the summary type of the value by clicking on Settings option.

Settings option

Select the required summary type from list.

Summary type

You can select what data to be displayed by choosing filter option.

Choosing filter option

The Measure Filter option will be shown and you can choose the filter condition and apply the condition value.

Measure Filter option

Measure Filter condition

You can clear the filter.

Clear filter

You can Format the value.

Format the value

The format options will be shown.

Format options

NOTE

For 100% Stacked Charts, default format type is Percentage.

Choose the options you need and click OK.

Choose option

Now the Chart will be rendered like this.

Chart illustration

You can add more number values by drag drop the Measures into Value field.

Add more number values

Chart illustration

You can also add Dimensions and Columns to Value(s).

Assigning Column(s)

You can add the Dimension into Columns section by drag drop.

Add the Dimension

Chart illustration

You have option to add more than one Column Value.

Add more options

The following alert message will be shown.

Alert message

  • If you choose Yes Drill down option will be enabled.

You can drill down the chart by clicking on the chart.

Drill down the chart

The drilled view of the chart is follows.

Drilled view of the chart

  • If you click No the new Dimension value will replace old value.

Replace old value

You can also add Measures and Expression columns into Column(s) field.

You have options to change the settings.

Options to change the settings

Sorting

You can sort the chart either in Ascending or Descending series.

Ascending Order

Ascending Order

Descending order

Descending order

You can apply a filter.

Apply a filter

Applied filter

Select the Conditions and Rank you need.

Conditions and Rank

Now the chart will be rendered like this.

Chart illustration

To show all records again click on Show All Records.

Show All Records

On adding Measures into Column(s) will show the following alert.

Measures into Columns

Alert dialog

To continue select Yes, otherwise select No.

Assigning Row

You can add Dimension into the Row field for series chart.

Assigning Row

The chart will be rendered in series as shown in the image

Chart will be rendered in series

You have settings options similar to Column(s).

Settings options

How to configure SSAS data to 100% stacked bar Chart?

100% Stacked Bar Chart need a minimum of 1 value element and 1 column element to showcase. The measure or expression field that you would like to analyze can be dropped into Value(s) block. The dimension that you would like to categorize the measure, can be dropped onto Column block. If you would like to categorize based on a series, then the respective dimension can be dropped onto Row block in addition.

Following steps illustrates configuration of SSAS data to 100% Stacked Bar Chart

Drag and drop the 100% Stacked Bar chart widget into canvas and resize into your required size.

Drag and drop the 100 Stacked Bar

Select the dropped widget using mouse.

Select the dropped widget

Click the Assign Data button in the toolbar.

A Data pane will be opened with available Measures and Dimensions.

Assign Data

Assigning Value(s)

Drag and drop a column under Measures category into Value(s) section.

Drag and drop a column under Measures

Now the chart will be rendered like this.

Chart illustration

Define the filter criteria to match through choosing Edit option in Filter menu item.

Filter criteria

The Measure filter dialog will be shown where you can choose the filter condition and apply the condition value.

Measure filter dialog

Select Clear option to clear the defined filter.

Clear option

You can also add more than one column to the Value(s) section

Add more than one column

Chart illustration

Assigning Column(s)

You can also add more than one column to the Value(s) section.

Assigning Columns

Chart illustration

You may also add more than one column into Column(s) section. In that case, you will be prompted with a message like below, asking for confirmation to enable drilling across the levels.

Enabling drill down

Select Yes to enable drill option in chart. Select No to replace the existing column with this one in the Column(s) section.

Click the respective data value marker in chart to drill into its inner level.

Data value marker

Through the breadcrumb at top, you may navigate to the outer or middle levels from your current inner level.

Define filter criteria through Filter(s)… menu item in the Settings drop down menu.

Filtering criteria

Select Filter(s)… to launch the Filters window.

Filters window

Define the filter Condition and Rank and Click OK.

Condition and Rank

Now the chart will be rendered like this

Chart illustration

To show all records again click on Show All Records.

Show All Records

Assigning Row

You can add a dimension level or hierarchy to Row section for series rendering of chart

Assigning Row

The chart will be rendered in series as shown in the image below.

Chart illustration

How to format 100% Stacked Bar Chart?

You can format the 100% stacked bar chart for better illustration of the view that you require, through the settings available in Properties pane.

To configure data into 100% stacked bar chart follow the steps

  1. Drag and drop the 100% stacked bar chart into canvas and resize it to your required size.

  2. Configure the data into 100% stacked bar chart.

  3. Focus on the 100% stacked bar chart and Click on Widget Settings.

Format 100 Stacked Bar Chart

The property window will be opened.

Property window

You can see the list of properties available for the widget with default value.

General Settings

General Settings

Header

This allows you to set title for this 100% stacked bar chart widget.

SubHeading

This allows you to set sub-title for this 100% stacked bar chart widget.

Description

This allows you to set description for this 100% stacked bar chart widget, whose visibility will be denoted by i icon, hovering which will display this description in tooltip.

Basic Settings

Basic Settings

Chart Type

This allows you to switch the widget view from current chart type to another convertible chart type.

Enable Animation

This allows you to enable the series rendering in animated mode.

Enable Drill Down

This allows you to add more than one dimension element to the Column block in Data Pane of Widget View such that, those form an hierarchy and each of its level can be navigated through clicking the respective series drawn. In its disabled state, trying to add more than one element will replace the existing one.

Show Legend

This allows you to toggle the visibility of legend in chart and also changing the legend text position (selecting through combo box).

Show Legend

Enabling the option Custom Legend Text will allow you to define a custom text (through the text area) to display for each legend series (selecting through the combo box) in chart.

Custom Legend Settings

You can customize the legend text through the Custom Legend Settings dialog. This dialog will show the legend text list as labels at left and corresponding text area at right to add the formatted text to display instead. When a column is added into Row section, this dialog will show two options Individual and Group at top in addition, to toggle between.

Individual

Selecting Individual option will allow you to define a custom text (through the text area) to display for each legend series in chart with the default format:

{{ : Row }} ({{ : Value }})

Where, Row represents the value of dimension column added to Row section and Value represents the value of the measure column added to Value section.

Individual

Group

Enabling Group option will allow you to set the display format and define a custom text (through the text area) to display for each legend series based on the specified format.

Group

For example, If Display Format is {{ : Row }} ({{ : Value }}), then Legend series will display like Argentina (Sum of Order ID)

Display Format

Show Value Labels

This allows you to toggle the visibility of value or data labels.

Show Value Labels

Value Label Rotation

This allows you to define the rotation angle for the value labels to display.

Value Label Rotation

Value Label Font Size

This allows you to define the font size for the value labels to display. Text will get collapsed,
if it exceeds the size of the bar. Default font size for the Value label is 9 pixels.

Sets label font size

Value Labels Suffix

Allows you to set suffix to the value/data labels.

Value Labels Suffix

Filter Settings

Filter Settings

Enable Hierarchical Filtering

This allows you to define the behavior of top n filtering which can be flat or hierarchical.

Act as Master Widget

This allows you to define this 100% stacked bar chart widget as a master widget such that its filter action can be made to listen by other widgets in the dashboard.

Ignore Filter Actions

This allows you to define this 100% stacked bar chart widget to ignore responding to the filter actions applied on other widgets in dashboard.

Link Settings

Link Settings

To configure the linking to URL or dashboard with the widget through its settings. For more details, refer Linking.

Container Settings

Container Settings

Title Alignment

This allows you to handle the alignment of widget title to either left, center or right.

Title Color

This allows you to apply text color to the widget title.

Show Border

This allows you to toggle the visibility of border surrounding the widget.

Corner Radius

This allows you to apply the specified radius to the widget corners. Value can be between 0 and 10.

Show Maximize

This allows you to enable/disable the maximized mode of this 100% stacked bar chart widget. The visibility of the maximize icon in widget header will be defined based on this setting.

CSV Export

This allows you to enable/disable the CSV export option for this 100% stacked bar chart widget. Enabling this allows you to export the summarized data of the widget view to CSV format in viewer.

Excel Export

This allows you to enable/disable the Excel export option for this 100% stacked bar chart widget. Enabling this allows you to export the summarized data of the widget view to XLSX format in viewer.

Image Export

This allows you to enable/disable the image export option for this 100% stacked bar chart widget. Enabling this allows you to export the view of the widget to image format (*.JPG) in viewer.

Enable Comment

This allows you to enable/disable comment for dashboard widget. For more details refer here

Axis Settings

Axis Settings

This section allows you to customize the axis settings in chart.

Category Axis

This allows you to enable/edit the Category Axis title. It will reflect in chart area x-axis name.

Category Axis

Category Axis Title

This allows you to toggle the visibility of Category axis title.

Label overflow mode

This allows you to handle the display mode of the overlapping labels.

Trim

This option trims the end of overlapping label in the axis.

Primary_xaxis_label_trim

Hide

This option hides the overlapping label in the axis.

Primary_xaxis_label_hide

Wrap

This option wraps the lengthy label text in the axis.

Primary_xaxis_label_wrap

Label Rotation

This allows you to define the rotation angle for the category axis labels to display.

Axis Label Size

This allows you to increase or decrease the font size of the category axis label. Default font size for the category axis label was 10 pixels.

Category axis label size

Primary Value Axis

This allows you to enable/edit the Primary Value Axis title. It will reflect in chart area axis.

Primary Value Axis

Primary Value Axis Title

This allows you to toggle the visibility of primary value axis title.

Primary Value Axis Title

Axis Label Size

This allows you to increase or decrease the font size of the primary axis label. Default font size for the primary axis label was 10 pixels.

Primary axis label size

Primary Value Axis Range

This allows you to set user-defined range with valid interval for primary value axis. The axis range can be set from Axis Range Settings dialog and this can be opened on clicking the Axis Range button in primary axis property pane.

Axis Range Settings

You can customize the axis range values through Axis Range Settings dialog. This dialog will show the options to set minimum range, maximum range and interval values.

Axis Range Settings

Below Chart demonstrate the Axis Range support, with the above shown min, max and interval values.

Chart illustration

Secondary Value Axis

This allows you to enable/edit the Secondary Value Axis title. It will reflect in chart area secondary y-axis name.

Secondary Value Axis Title

This allows you to toggle the visibility of secondary value axis title.

Axis Label Size

This allows you to increase or decrease the font size of the secondary axis label. Default font size for the secondary axis label was 10 pixels.

Secondary axis label size

Secondary Value Axis Range

This allows you to set user-defined range with valid interval for secondary value axis. The axis range can be set from Axis Range Settings dialog and this can be opened on clicking Axis Range button in secondary axis property pane.

Secondary Value Axis Range

Below Chart demonstrate the Axis Range support, with the above shown min, max and interval values.

Axis Range support

Grid Line Settings

Grid Line Settings

Primary value Axis

This allows you to enable the primary value axis’ gridlines for the 100% stacked bar chart.

Primary value Axis

Category Axis

This allows you to define the visibility of Category axis’ gridlines.

Category Axis