Working with Annotations
16 Dec 202424 minutes to read
Essential® PDF provides support for interactive annotations.
You can add, delete and modify the annotation from the PDF documents.
Adding annotations to a PDF document
You can add a popup annotation to the page using PdfPopupAnnotation class. The following code example explains this.
//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page .
PdfPage page = document.Pages.Add();
//Creates a rectangle.
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new popup annotation.
PdfPopupAnnotation popupAnnotation = new PdfPopupAnnotation(rectangle, "Test popup annotation");
popupAnnotation.Border.Width = 4;
popupAnnotation.Border.HorizontalRadius = 20;
popupAnnotation.Border.VerticalRadius = 30;
//Sets the pdf popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph;
//Adds this annotation to the created page.
page.Annotations.Add(popupAnnotation);
//Save the document into stream.
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document.
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new popup annotation.
Dim popupAnnotation As New PdfPopupAnnotation(rectangle, "Test popup annotation")
popupAnnotation.Border.Width = 4
popupAnnotation.Border.HorizontalRadius = 20
popupAnnotation.Border.VerticalRadius = 30
'Sets the pdf popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph
'Adds this annotation to the created page.
page.Annotations.Add(popupAnnotation)
'Saves the document to disk.
document.Save("PopupAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
To add PdfPopupAnnotation to an existing PDF document using PdfLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument document = new PdfLoadedDocument(docStream);
//Creates a rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new popup annotation.
PdfPopupAnnotation popupAnnotation = new PdfPopupAnnotation(rectangle, "Test popup annotation");
popupAnnotation.Border.Width = 4;
popupAnnotation.Border.HorizontalRadius = 20;
popupAnnotation.Border.VerticalRadius = 30;
//Sets the pdf popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph;
//Adds the annotation to loaded page
document.Pages[0].Annotations.Add(popupAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document.
PdfLoadedDocument document = new PdfLoadedDocument("input.pdf");
//Creates a rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new popup annotation.
PdfPopupAnnotation popupAnnotation = new PdfPopupAnnotation(rectangle, "Test popup annotation");
popupAnnotation.Border.Width = 4;
popupAnnotation.Border.HorizontalRadius = 20;
popupAnnotation.Border.VerticalRadius = 30;
//Sets the pdf popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph;
//Adds the annotation to loaded page
document.Pages[0].Annotations.Add(popupAnnotation);
//Saves the document to disk.
document.Save("PopupAnnotation.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfLoadedDocument("input.pdf")
'Creates a rectangle.
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new popup annotation.
Dim popupAnnotation As New PdfPopupAnnotation(rectangle, "Test popup annotation")
popupAnnotation.Border.Width = 4
popupAnnotation.Border.HorizontalRadius = 20
popupAnnotation.Border.VerticalRadius = 30
'Sets the pdf popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph
'Adds the annotation to loaded page
document.Pages(0).Annotations.Add(popupAnnotation)
'Saves the document to disk.
document.Save("PopupAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Flatten annotation
Annotations can be flattened by removing the existing annotation and replacing it with graphics objects that would resemble the annotation and cannot be edited.
This can be achieved by enabling the Flatten property. Please refer the sample for flattening all the annotations in the PDF document.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get all the pages
foreach (PdfLoadedPage loadedPage in loadedDocument.Pages)
{
//Flatten all the annotations in the page
loadedPage.Annotations.Flatten = true;
}
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Closes the document
loadedDocument.Close(true);//Load the existing PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Get all the pages.
foreach (PdfLoadedPage loadedPage in loadedDocument.Pages)
{
//Flatten all the annotations in the page
loadedPage.Annotations.Flatten = true;
}
//Save and close the PDF document instance.
loadedDocument.Save("output.pdf");
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Get all the pages
For Each loadedPage As PdfLoadedPage In loadedDocument.Pages
'Flatten all the annotations in the page
loadedPage.Annotations.Flatten = True
Next
'Save and close the PDF document instance
loadedDocument.Save("output.pdf")
loadedDocument.Close(True)You can download a complete working sample from GitHub.
To flatten the specific annotation in the PDF document, use the below code example.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get all the pages
foreach (PdfLoadedPage loadedPage in loadedDocument.Pages)
{
//Flatten all the annotations in the page
foreach (PdfLoadedAnnotation annotation in loadedPage.Annotations)
{
//Check for the circle annotation
if (annotation is PdfLoadedCircleAnnotation)
{
//Flatten the circle annotation
annotation.Flatten = true;
}
}
}
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Closes the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Get all the pages
foreach (PdfLoadedPage loadedPage in loadedDocument.Pages)
{
//Flatten all the annotations in the page
foreach (PdfLoadedAnnotation annotation in loadedPage.Annotations)
{
//Check for the circle annotation
if (annotation is PdfLoadedCircleAnnotation)
{
//Flatten the circle annotation
annotation.Flatten = true;
}
}
}
//Save and close the PDF document instance
loadedDocument.Save("Output.pdf");
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Get all the pages
For Each loadedPage As PdfLoadedPage In loadedDocument.Pages
'Flatten all the annotations in the page
For Each annotation As PdfLoadedAnnotation In loadedPage.Annotations
'Check for the circle annotation
If TypeOf annotation Is PdfLoadedCircleAnnotation Then
'Flatten the circle annotation
annotation.Flatten = True
End If
Next
Next
'Save and close the PDF document instance
loadedDocument.Save("Output.pdf")
loadedDocument.Close(True)You can download a complete working sample from GitHub.
To flatten pop-up annotation Flatten property to an existing PDF document using PdfLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("PopupAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get all the pages
foreach (PdfLoadedPage loadedPage in loadedDocument.Pages)
{
foreach (PdfLoadedAnnotation annotation in loadedPage.Annotations)
{
if (annotation is PdfLoadedPopupAnnotation)
{
//Enable the flatten annotation
annotation.Flatten = true;
//Enable flatten for the pop-up window annotation
annotation.FlattenPopUps = true;
}
}
}
//Creating the stream object
MemoryStream stream = new MemoryStream();
//Save the document as stream
loadedDocument.Save(stream);
//Close the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("PopupAnnotation.pdf");
//Get all the pages
foreach(PdfLoadedPage loadedPage in loadedDocument.Pages)
{
foreach(PdfLoadedAnnotation annotation in loadedPage.Annotations)
{
if(annotation is PdfLoadedPopupAnnotation)
{
//Enable the flatten annotation
annotation.Flatten = true;
//Enable flatten for the pop-up window annotation
annotation.FlattenPopUps = true;
}
}
}
//Save the document
loadedDocument.Save("Output.pdf");
//Close the document
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("PopupAnnotation.pdf")
'Get all the pages
For Each loadedPage As PdfLoadedPage In loadedDocument.Pages
For Each annotation As PdfLoadedAnnotation In loadedPage.Annotations
If TypeOf annotation Is PdfLoadedPopupAnnotation Then
'Enable the flatten annotation
annotation.Flatten = True
'Enable flatten for the pop-up window annotation
annotation.FlattenPopUps = True
End If
Next
Next
'Save the document
loadedDocument.Save("Output.pdf")
'Close the document
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Flattening redaction annotation
To flatten the redaction annotation in PDF document, use the following code example.
//Get stream from an existing PDF document.
FileStream docStream = new FileStream("Input.pdf", FileMode.Open, FileAccess.Read);
//Load the PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the annotation from annotation collection.
foreach (PdfAnnotation annot in loadedDocument.Pages[0].Annotations)
{
//Check for the Redaction annotation.
if (annot is PdfLoadedRedactionAnnotation)
{
//Get the redaction annotation.
PdfLoadedRedactionAnnotation redactAnnot = annot as PdfLoadedRedactionAnnotation;
//Flatten the redaction annotation.
redactAnnot.Flatten = true;
}
}
loadedDocument.Redact();
//Save the document into stream.
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Close the document.
loadedDocument.Close(true);//Load the existing PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("Input.pdf");
//Get the annotation from annotation collection.
foreach (PdfAnnotation annot in loadedDocument.Pages[0].Annotations)
{
//Check for the Redaction annotation.
if (annot is PdfLoadedRedactionAnnotation)
{
//Get the redaction annotation.
PdfLoadedRedactionAnnotation redactAnnot = annot as PdfLoadedRedactionAnnotation;
//Flatten the redaction annotation.
redactAnnot.Flatten = true;
}
}
//Save the document.
loadedDocument.Save("Output.pdf");
//Close the document.
loadedDocument.Close();'Load the existing PDF document.
Dim loadedDocument As PdfLoadedDocument = New PdfLoadedDocument("../../Data/Input.pdf")
'Get the annotation from annotation collection.
For Each annot As PdfAnnotation In loadedDocument.Pages(0).Annotations
'Check for redaction annotation.
If TypeOf annot Is PdfLoadedRedactionAnnotation Then
'Load the redaction annotation.
Dim redactAnnot As PdfLoadedRedactionAnnotation = TryCast(annot, PdfLoadedRedactionAnnotation)
'Flatten the redaction annotation.
redactAnnot.Flatten = True
End If
Next
'Save the PDF document.
loadedDocument.Save("Output.pdf")
'Close the PDF document.
loadedDocument.Close()NOTE
To flatten the redaction annotation from PDF document in ASP.NET Core, you need to include the Syncfusion.Pdf.Imaging.Portable assembly reference in the .NET Core project.
Flattening annotations without calling save method
Annotations can be flattened by removing the existing annotation and replacing it with graphic objects that would resemble the annotation and cannot be edited.
This can be achieved by calling the FlattenAnnotations method. Please refer to the sample for flattening all the annotations in the PDF document without calling the save method.
To flatten the annotation without pop-ups FlattenAnnotations method to an existing PDF document using PdfLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Flatten all the annotations without popups in the document
loadedDocument.FlattenAnnotations();
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Closes the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Flatten all the annotations without popups in the document
loadedDocument.FlattenAnnotations();
//Save and close the PDF document instance
loadedDocument.Save("output.pdf");
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Flatten all the annotations without popups in the document
loadedDocument.FlattenAnnotations()
Next
'Save and close the PDF document instance
loadedDocument.Save("output.pdf")
loadedDocument.Close(True)You can download a complete working sample from GitHub.
To flatten the annotation with pop-ups FlattenAnnotations method to an existing PDF document using PdfLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Flatten all the annotations without popups in the document
loadedDocument.FlattenAnnotations(true);
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Closes the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Flatten all the annotations with popups in the document
loadedDocument.FlattenAnnotations(true);
//Save and close the PDF document instance
loadedDocument.Save("output.pdf");
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Flatten all the annotations without popups in the document
loadedDocument.FlattenAnnotations(true)
'Save and close the PDF document instance
loadedDocument.Save("output.pdf")
loadedDocument.Close(true)You can download a complete working sample from GitHub.
Flatten specific types of annotations
To flatten specific types of annotations in a PDF document, use the FlattenAnnotations method available in the PdfLoadedDocument instance by providing an array of the desired annotation types. Refer to the following code example for more details.
// Load the PDF document
using (FileStream docStream = new FileStream(@"input.pdf", FileMode.Open, FileAccess.Read))
{
using (PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream))
{
// Specify the annotation types to flatten
PdfLoadedAnnotationType[] pdfLoadedAnnotationTypes = new PdfLoadedAnnotationType[]
{
PdfLoadedAnnotationType.PolygonAnnotation
};
// Flatten the selected annotations
loadedDocument.FlattenAnnotations(pdfLoadedAnnotationTypes);
// Save the flattened document
using (MemoryStream memoryStream = new MemoryStream())
{
loadedDocument.Save(memoryStream);
// MemoryStream can be used further as needed
}
}
}// Load the PDF document from a file path
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("Input.pdf");
// Specify the annotation types to flatten
PdfLoadedAnnotationType[] pdfLoadedAnnotationTypes = new PdfLoadedAnnotationType[]
{
PdfLoadedAnnotationType.PolygonAnnotation
};
// Flatten the selected annotations
loadedDocument.FlattenAnnotations(pdfLoadedAnnotationTypes);
// Save the flattened PDF document to a file path
loadedDocument.Save(@"C:\path\to\output.pdf");
// Close the document instance
loadedDocument.Close(true);' Load the PDF document from a file path
Dim loadedDocument As New PdfLoadedDocument("C:\path\to\input.pdf")
' Specify the annotation types to flatten
Dim pdfLoadedAnnotationTypes As PdfLoadedAnnotationType() = {
PdfLoadedAnnotationType.PolygonAnnotation
}
' Flatten the selected annotations
loadedDocument.FlattenAnnotations(pdfLoadedAnnotationTypes)
' Save the flattened PDF document to a file path
loadedDocument.Save("C:\path\to\output.pdf")
' Close the document instance
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Supported annotation types
3D Annotation
3D Annotations are used to represent 3D artworks in a PDF document. Essential® PDF provides support to embed 3D files (u3d) in PDF.
You can add a 3D annotation in PDF document using Pdf3DAnnotation class. The following example illustrates this.
//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
FileStream inputStream = new FileStream("3DAnnotation.U3D", FileMode.Open, FileAccess.Read);
//Creates a new pdf 3d annotation.
Pdf3DAnnotation pdf3dAnnotation = new Pdf3DAnnotation(new RectangleF(10, 50, 300, 150), inputStream);
//Handles the activation of the 3d annotation
Pdf3DActivation activation = new Pdf3DActivation();
activation.ActivationMode = Pdf3DActivationMode.ExplicitActivation;
activation.ShowToolbar = true;
pdf3dAnnotation.Activation = activation;
//Adds annotation to page
page.Annotations.Add(pdf3dAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new pdf 3d annotation.
Pdf3DAnnotation pdf3dAnnotation = new Pdf3DAnnotation(new RectangleF(10, 50, 300, 150), @"3DAnnotation.U3D");
//Handles the activation of the 3d annotation
Pdf3DActivation activation = new Pdf3DActivation();
activation.ActivationMode = Pdf3DActivationMode.ExplicitActivation;
activation.ShowToolbar = true;
pdf3dAnnotation.Activation = activation;
//Adds annotation to page
page.Annotations.Add(pdf3dAnnotation);
//Saves the document to disk.
document.Save("3DAnnotation.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new pdf 3d annotation.
Dim pdf3dAnnotation As New Pdf3DAnnotation(New RectangleF(10, 50, 300, 150), "3DAnnotation.U3D")
'Handles the activation of the 3d annotation
Dim activation As New Pdf3DActivation()
activation.ActivationMode = Pdf3DActivationMode.ExplicitActivation
activation.ShowToolbar = True
pdf3dAnnotation.Activation = activation
'Adds annotation to page
page.Annotations.Add(pdf3dAnnotation)
'Saves the document to disk.
document.Save("3DAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
You can add the JavaScript script to the 3D annotation using the OnInstantiate property, which is executed whenever a 3D stream is read to create an instance of the 3D artwork. The following code snippet illustrate this.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
FileStream inputStream = new FileStream("3DAnnotation.U3D", FileMode.Open, FileAccess.Read);
//Creates a new PDF 3D annotation
Pdf3DAnnotation pdf3dAnnotation = new Pdf3DAnnotation(new RectangleF(10, 50, 300, 150), inputStream);
//Assign JavaScript script
pdf3dAnnotation.OnInstantiate = "host.getURL(\"http://www.google.com\")";
//Adds annotation to page
page.Annotations.Add(pdf3dAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Create a new PDF 3D annotation
Pdf3DAnnotation pdf3dAnnotation = new Pdf3DAnnotation(new RectangleF(10, 50, 300, 150), @"Input.u3d");
//Assign JavaScript script
pdf3dAnnotation.OnInstantiate = "host.getURL(\"http://www.google.com\")";
//Adds annotation to page
page.Annotations.Add(pdf3dAnnotation);
//Save the document to disk
document.Save("3DAnnotation.pdf");
//Close the document
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Create a new PDF 3D annotation
Dim pdf3dAnnotation As New Pdf3DAnnotation(New RectangleF(10, 50, 300, 150), "Input.u3d")
'Assign JavaScript script
pdf3dAnnotation.OnInstantiate = "host.getURL(""http://www.google.com"")"
'Adds annotation to page
page.Annotations.Add(pdf3dAnnotation)
'Save the document to disk
document.Save("3DAnnotation.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
File Link Annotation
Links for external files can be added in a PDF document by using the PdfFileLinkAnnotation class.
The following code example explains how to add a file link annotation in PDF.
//PDF doesn't support File Link Annotation C#.NET Cross platforms.//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new pdf file link annotation.
PdfFileLinkAnnotation fileLinkAnnotation = new PdfFileLinkAnnotation(rectangle, @"logo.png");
//Adds this annotation to a new page.
page.Annotations.Add(fileLinkAnnotation);
//Saves the document to disk.
document.Save("FileLinkAnnotation.pdf");
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new pdf file link annotation.
Dim fileLinkAnnotation As New PdfFileLinkAnnotation(rectangle, "logo.png")
'Adds this annotation to a new page.
page.Annotations.Add(fileLinkAnnotation)
'Saves the document to disk.
document.Save("FileLinkAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Rich Media Annotation
A rich media annotation is used to play the media clip in a PDF Document.
The following rich media types are supported:
-
Video
-
Sound
The following code examples explain how to add a rich media annotation in a PDF document using the PdfRichMediaAnnotation.
//Load the PDF document.
FileStream inputStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(inputStream);
//Get the page.
PdfLoadedPage lpage = loadedDocument.Pages[0] as PdfLoadedPage;
//Create the PDF richmedia annotation.
PdfRichMediaAnnotation richMediaAnnotation = new PdfRichMediaAnnotation(new RectangleF(0, 0, 200, 100));
//Set properties to the annotation.
richMediaAnnotation.ActivationMode = PdfRichMediaActivationMode.Click;
richMediaAnnotation.PresentationStyle = PdfRichMediaPresentationStyle.Windowed;
//Set the richmedia content.
FileStream fileStream = new FileStream("video.mp4", FileMode.Open, FileAccess.Read);
PdfRichMediaContent content = new PdfRichMediaContent("video", fileStream, "mp4");
richMediaAnnotation.Content = content;
//Create the appearance of the richmedia.
richMediaAnnotation.Appearance.Normal.Graphics.DrawString("Click here to play video...", new PdfStandardFont(PdfFontFamily.Helvetica, 15), PdfBrushes.Blue, new RectangleF(0, 0, 200, 100), new PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle));
//Add the annotation to the page.
lpage.Annotations.Add(richMediaAnnotation);
//Save the document into the stream.
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Close the document.
loadedDocument.Close(true);//Load the existing PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Get the page.
PdfLoadedPage lpage = loadedDocument.Pages[0] as PdfLoadedPage;
//Create the rich media annotation.
PdfRichMediaAnnotation richMediaAnnotation = new PdfRichMediaAnnotation(new RectangleF(0, 0, 200, 100));
//Sets properties to the annotation.
richMediaAnnotation.ActivationMode = PdfRichMediaActivationMode.Click;
richMediaAnnotation.PresentationStyle = PdfRichMediaPresentationStyle.Windowed;
//Set the rich media content.
PdfRichMediaContent content = new PdfRichMediaContent(@"video.mp4");
richMediaAnnotation.Content = content;
//Create the appearance of the rich media.
richMediaAnnotation.Appearance.Normal.Graphics.DrawString("Click here to play video...", new PdfStandardFont(PdfFontFamily.Helvetica, 15), PdfBrushes.Blue, new RectangleF(0, 0, 200, 100), new PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle));
//Add the annotation to the page.
lpage.Annotations.Add(richMediaAnnotation);
//Save the document to the disk.
loadedDocument.Save(@"RichMediaAnnotation.pdf");
loadedDocument.Close(true);'Load the existing PDF document.
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Get the page.
Dim lpage As PdfLoadedPage = TryCast(loadedDocument.Pages(0),PdfLoadedPage)
'Create the PDF richmedia annotation.
Dim richMediaAnnotation As New PdfRichMediaAnnotation (New RectangleF(0, 0, 200, 100))
richMediaAnnotation.ActivationMode = PdfRichMediaActivationMode.Click
richMediaAnnotation.PresentationStyle = PdfRichMediaPresentationStyle.Windowed
Dim content As New PdfRichMediaContent (@"video.mp4")
richMediaAnnotation.Content = content
'Create the appearance of the richmedia.
richMediaAnnotation.Appearance.Normal.Graphics.DrawString("Click here to play video...", New PdfStandardFont(PdfFontFamily.Helvetica, 15), PdfBrushes.Blue, New RectangleF(0, 0, 200, 100), New PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle))
'Add the annotation to the page.
lpage.Annotations.Add(richMediaAnnotation)
'Save the document to the disk.
loadedDocument.Save("RichMediaAnnotation.pdf")
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Free Text Annotation
Free text annotation enables you to display the text directly on the page. When you want to add a comment directly without placing it on a pop-up window, PdfFreeTextAnnotation can be used.
The following code example explains how to add a free text annotation in the PDF document.
//Creates a new pdf document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(50, 100, 100, 50));
//Sets properties to the annotation
freeText.MarkupText = "Free Text with Callout";
freeText.TextMarkupColor = new PdfColor(Color.Black);
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
freeText.Color = new PdfColor(Color.Yellow);
freeText.BorderColor = new PdfColor(Color.Red);
freeText.Border = new PdfAnnotationBorder(.5f);
freeText.LineEndingStyle = PdfLineEndingStyle.OpenArrow;
freeText.AnnotationFlags = PdfAnnotationFlags.Default;
freeText.Text = "Free Text";
freeText.Opacity = 0.5f;
PointF[] points = { new PointF(100, 450), new PointF(100, 200), new PointF(100, 150) };
freeText.CalloutLines = points;
//Adds the annotation to page
page.Annotations.Add(freeText);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new pdf document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(50, 100, 100, 50));
//Sets properties to the annotation
freeText.MarkupText = "Free Text with Callout";
freeText.TextMarkupColor = new PdfColor(Color.Black);
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
freeText.Color = new PdfColor(Color.Yellow);
freeText.BorderColor = new PdfColor(Color.Red);
freeText.Border = new PdfAnnotationBorder(.5f);
freeText.LineEndingStyle = PdfLineEndingStyle.OpenArrow;
freeText.AnnotationFlags = PdfAnnotationFlags.Default;
freeText.Text = "Free Text";
freeText.Opacity = 0.5f;
PointF[] points = { new PointF(100, 450), new PointF(100, 200), new PointF(100, 150) };
freeText.CalloutLines = points;
//Adds the annotation to page
page.Annotations.Add(freeText);
//Saves the document to disk.
document.Save("FreeTextAnnotation.pdf");
document.Close(true);'Creates a new pdf document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates PDF free text annotation
Dim freeText As New PdfFreeTextAnnotation(New RectangleF(50, 100, 100, 50))
'Sets properties to the annotation
freeText.MarkupText = "Free Text with Callout"
freeText.TextMarkupColor = New PdfColor(Color.Black)
freeText.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 7.0F)
freeText.Color = New PdfColor(Color.Yellow)
freeText.BorderColor = New PdfColor(Color.Red)
freeText.Border = New PdfAnnotationBorder(0.5F)
freeText.LineEndingStyle = PdfLineEndingStyle.OpenArrow
freeText.AnnotationFlags = PdfAnnotationFlags.[Default]
freeText.Text = "Free Text"
freeText.Opacity = 0.5F
Dim points As PointF() = { New PointF(100, 450), New PointF(100, 200), New PointF(100, 150) }
freeText.CalloutLines = points
'Adds the annotation to page
page.Annotations.Add(freeText)
'Saves the document to disk.
document.Save("FreeTextAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Line Annotation
Line annotation displays a single straight line on the page. When you open it, it displays a pop-up window containing text of the associated note.
PdfLineAnnotation is used to create and set the properties of the Line annotation.
//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Specifies the line end points
int[] points = new int[] { 80, 420, 150, 420 };
//Creates a new line annotation.
PdfLineAnnotation lineAnnotation = new PdfLineAnnotation(points, "Line Annotation");
//Creates pdf line border
LineBorder lineBorder = new LineBorder();
lineBorder.BorderStyle = PdfBorderStyle.Solid;
lineBorder.BorderWidth = 1;
lineAnnotation.lineBorder = lineBorder;
lineAnnotation.LineIntent = PdfLineIntent.LineDimension;
//Assigns the line ending style
lineAnnotation.BeginLineStyle = PdfLineEndingStyle.Butt;
lineAnnotation.EndLineStyle = PdfLineEndingStyle.Diamond;
lineAnnotation.AnnotationFlags = PdfAnnotationFlags.Default;
//Assigns the line color
lineAnnotation.InnerLineColor = new PdfColor(Color.Green);
lineAnnotation.BackColor = new PdfColor(Color.Green);
//Assigns the leader line
lineAnnotation.LeaderLineExt = 0;
lineAnnotation.LeaderLine = 0;
//Assigns the Line caption type
lineAnnotation.LineCaption = true;
lineAnnotation.CaptionType = PdfLineCaptionType.Inline;
//Adds this annotation to a new page.
page.Annotations.Add(lineAnnotation);
//Save the document into stream.
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document.
document.Close(true);//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Specifies the line end points
int[] points = new int[] { 80, 420, 150, 420 };
//Creates a new line annotation.
PdfLineAnnotation lineAnnotation = new PdfLineAnnotation(points, "Line Annotation");
//Creates pdf line border
LineBorder lineBorder = new LineBorder();
lineBorder.BorderStyle = PdfBorderStyle.Solid;
lineBorder.BorderWidth = 1;
lineAnnotation.lineBorder = lineBorder;
lineAnnotation.LineIntent = PdfLineIntent.LineDimension;
//Assigns the line ending style
lineAnnotation.BeginLineStyle = PdfLineEndingStyle.Butt;
lineAnnotation.EndLineStyle = PdfLineEndingStyle.Diamond;
lineAnnotation.AnnotationFlags = PdfAnnotationFlags.Default;
//Assigns the line color
lineAnnotation.InnerLineColor = new PdfColor(Color.Green);
lineAnnotation.BackColor = new PdfColor(Color.Green);
//Assigns the leader line
lineAnnotation.LeaderLineExt = 0;
lineAnnotation.LeaderLine = 0;
//Assigns the Line caption type
lineAnnotation.LineCaption = true;
lineAnnotation.CaptionType = PdfLineCaptionType.Inline;
//Adds this annotation to a new page.
page.Annotations.Add(lineAnnotation);
//Saves the document to disk.
document.Save("LineAnnotation.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Specifies the line end points
Dim points As Integer() = New Integer() {80, 420, 150, 420}
'Creates a new line annotation.
Dim lineAnnotation As New PdfLineAnnotation(points, "Line Annotation")
'Creates pdf line border
Dim lineBorder As New LineBorder()
lineBorder.BorderStyle = PdfBorderStyle.Solid
lineBorder.BorderWidth = 1
lineAnnotation.lineBorder = lineBorder
lineAnnotation.LineIntent = PdfLineIntent.LineDimension
'Assigns the line ending style
lineAnnotation.BeginLineStyle = PdfLineEndingStyle.Butt
lineAnnotation.EndLineStyle = PdfLineEndingStyle.Diamond
lineAnnotation.AnnotationFlags = PdfAnnotationFlags.[Default]
'Assigns the line color
lineAnnotation.InnerLineColor = New PdfColor(Color.Green)
lineAnnotation.BackColor = New PdfColor(Color.Green)
'Assigns the leader line
lineAnnotation.LeaderLineExt = 0
lineAnnotation.LeaderLine = 0
'Assigns the Line caption type
lineAnnotation.LineCaption = True
lineAnnotation.CaptionType = PdfLineCaptionType.Inline
'Adds this annotation to a new page.
page.Annotations.Add(lineAnnotation)
'Saves the document to disk.
document.Save("LineAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Rubber stamp Annotation
Rubber stamp annotation displays text or graphics intended to look like it is stamped on the page with a rubber stamp.
When opened, it displays a pop-up window containing the text of the associated note.
PdfRubberStampAnnotation is used to create rubber stamp annotation.
//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new pdf rubber stamp annotation.
RectangleF rectangle = new RectangleF(40, 60, 80, 20);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation");
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft;
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new pdf rubber stamp annotation.
RectangleF rectangle = new RectangleF(40, 60, 80, 20);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation");
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft;
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation);
//Saves the document to disk.
document.Save("RubberStamp.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new pdf rubber stamp annotation.
Dim rectangle As New RectangleF(40, 60, 80, 20)
Dim rubberStampAnnotation As New PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation")
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation"
'Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation)
'Saves the document to disk.
document.Save("RubberStamp.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Ink Annotation
Ink annotation represents freehand “scribble” comprising one or more disjoint paths.
When you open it, it displays a pop-up window containing text of the associated note.
PdfInkAnnotation is used to create ink annotation in a PDF document.
//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
List<float> linePoints = new List<float> { 40, 300, 60, 100, 40, 50, 40, 300 };
//Creates a new ink annotation
RectangleF rectangle = new RectangleF(0, 0, 300, 400);
PdfInkAnnotation inkAnnotation = new PdfInkAnnotation(rectangle, linePoints);
inkAnnotation.Color = new PdfColor(Color.Red);
//Adds annotation to the page
page.Annotations.Add(inkAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
List<float> linePoints=new List<float>{40,300,60,100,40,50,40,300};
//Creates a new ink annotation
RectangleF rectangle = new RectangleF(0, 0, 300, 400);
PdfInkAnnotation inkAnnotation = new PdfInkAnnotation(rectangle,linePoints);
inkAnnotation.Color = new PdfColor(Color.Red);
//Adds annotation to the page
page.Annotations.Add(inkAnnotation);
//Saves the document to disk.
document.Save("InkAnnotation.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
Dim linePoints As New List(Of Single)() From {40, 300, 60, 100, 40, 50, 40, 300}
'Creates a new ink annotation
Dim rectangle As New RectangleF(0, 0, 300, 400)
Dim inkAnnotation As New PdfInkAnnotation(rectangle, linePoints)
inkAnnotation.Color = New PdfColor(Color.Red)
'Adds annotation to the page
page.Annotations.Add(inkAnnotation)
'Saves the document to disk.
document.Save("InkAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
You can get ink list points from the PdfLoadedInkAnnotation, represented by InkPointsCollection. The following code illustrate this.
//Load the PDF document
FileStream docStream = new FileStream("Input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Gets the first page from the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Gets the first ink annotation
PdfLoadedInkAnnotation inkAnnotation = annotations[0] as PdfLoadedInkAnnotation;
//Gets the ink points collection
List<List<float>> points = inkAnnotation.InkPointsCollection;
//Creating the stream object
MemoryStream stream = new MemoryStream();
//Save the document as stream
lDoc.Save(stream);
//Close the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("Input.pdf");
//Gets the first page from the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Gets the first ink annotation
PdfLoadedInkAnnotation inkAnnotation = annotations[0] as PdfLoadedInkAnnotation;
//Gets the ink points collection
List<List<float>> points = inkAnnotation.InkPointsCollection;
//Save the document
lDoc.Save("Output.pdf");
//Close the document
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("Input.pdf")
'Gets the first page from the document
Dim page As PdfLoadedPage = TryCast(lDoc.Pages(0), PdfLoadedPage)
'Gets the annotation collection
Dim annotations As PdfLoadedAnnotationCollection = page.Annotations
'Gets the first ink annotation
Dim inkAnnotation As PdfLoadedInkAnnotation = TryCast(annotations(0), PdfLoadedInkAnnotation)
'Gets the ink points collection
Dim points As List(Of List(Of Single)) = inkAnnotation.InkPointsCollection
'Save the document
lDoc.Save("Output.pdf")
'Close the document
lDoc.Close(True)You can download a complete working sample from GitHub.
Pop-up Annotation
Pop-up annotation displays text in a pop-up window for entry and editing.
It typically does not appear alone, but is associated with markup annotation, its parent annotation.
PdfPopupAnnotation is used to add pop-up annotation in a PDF document.
//Create new PDF document
PdfDocument document = new PdfDocument();
//Create a new PDF page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new popup annotation.
PdfPopupAnnotation popupAnnotation = new PdfPopupAnnotation(rectangle, "Test popup annotation");
popupAnnotation.Border.Width = 4;
popupAnnotation.Border.HorizontalRadius = 20;
popupAnnotation.Border.VerticalRadius = 30;
//Sets the PDF popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph;
//Adds this annotation to a new page.
page.Annotations.Add(popupAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Create new PDF document.
PdfDocument document = new PdfDocument();
//Create a new PDF page.
PdfPage page = document.Pages.Add();
//Creates a new rectangle.
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new popup annotation.
PdfPopupAnnotation popupAnnotation = new PdfPopupAnnotation(rectangle, "Test popup annotation");
popupAnnotation.Border.Width = 4;
popupAnnotation.Border.HorizontalRadius = 20;
popupAnnotation.Border.VerticalRadius = 30;
//Sets the PDF popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph;
//Adds this annotation to a new page.
page.Annotations.Add(popupAnnotation);
//Saves the document to disk.
document.Save("PopupAnnotation.pdf");
document.Close(true);'Creates a new PDF document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new popup annotation.
Dim popupAnnotation As New PdfPopupAnnotation(rectangle, "Test popup annotation")
popupAnnotation.Border.Width = 4
popupAnnotation.Border.HorizontalRadius = 20
popupAnnotation.Border.VerticalRadius = 30
'Sets the PDF popup icon.
popupAnnotation.Icon = PdfPopupIcon.NewParagraph
'Adds this annotation to a new page.
page.Annotations.Add(popupAnnotation)
'Saves the document to disk.
document.Save("PopupAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
File Attachment Annotation
File attachment annotation contains reference to a file that typically is embedded in the PDF file.
PdfAttachmentAnnotation is used to add a file attachment annotation in a PDF document.
//Creates a new PDF Document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF attachmentRectangle = new RectangleF(10, 40, 30, 30);
//Load the PDF document
FileStream inputStream = new FileStream("logo.png", FileMode.Open, FileAccess.Read);
//Creates a new attachment annotation.
PdfAttachmentAnnotation attachmentAnnotation = new PdfAttachmentAnnotation(attachmentRectangle, @"logo.png", inputStream);
//Sets the attachment icon to attachment annotation.
attachmentAnnotation.Icon = PdfAttachmentIcon.PushPin;
//Adds this annotation to a new page.
page.Annotations.Add(attachmentAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF Document.
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF attachmentRectangle = new RectangleF(10, 40, 30, 30);
//Creates a new attachment annotation.
PdfAttachmentAnnotation attachmentAnnotation = new PdfAttachmentAnnotation(attachmentRectangle, @"logo.png");
//Sets the attachment icon to attachment annotation.
attachmentAnnotation.Icon = PdfAttachmentIcon.PushPin;
//Adds this annotation to a new page.
page.Annotations.Add(attachmentAnnotation);
//Saves the document to disk.
document.Save("AttachmentAnnotation.pdf");
document.Close(true);'Creates a new PDF Document.
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim attachmentRectangle As New RectangleF(10, 40, 30, 30)
'Creates a new attachment annotation.
Dim attachmentAnnotation As New PdfAttachmentAnnotation(attachmentRectangle, "logo.png")
'Sets the attachment icon to attachment annotation.
attachmentAnnotation.Icon = PdfAttachmentIcon.PushPin
'Adds this annotation to a new page.
page.Annotations.Add(attachmentAnnotation)
'Saves the document to disk.
document.Save("AttachmentAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Sound Annotation
Sound annotation is used to play the sound clip in the PDF Document.
The following code example explains how to add a sound annotation in a PDF document using PdfSoundAnnotation.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new sound annotation.
FileStream inputStream = new FileStream("Startup.wav", FileMode.Open, FileAccess.Read);
PdfSoundAnnotation soundAnnotation = new PdfSoundAnnotation(rectangle, inputStream);
soundAnnotation.Sound.Encoding = PdfSoundEncoding.Signed;
soundAnnotation.Sound.Channels = PdfSoundChannels.Stereo;
soundAnnotation.Sound.Bits = 16;
soundAnnotation.Color = new PdfColor(Color.Red);
//Sets the pdf sound icon.
soundAnnotation.Icon = PdfSoundIcon.Speaker;
//Adds this annotation to a new page.
page.Annotations.Add(soundAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new sound annotation.
PdfSoundAnnotation soundAnnotation = new PdfSoundAnnotation(rectangle, @"startup.wav");
soundAnnotation.Sound.Encoding = PdfSoundEncoding.Signed;
soundAnnotation.Sound.Channels = PdfSoundChannels.Stereo;
soundAnnotation.Sound.Bits = 16;
soundAnnotation.Color = new PdfColor(Color.Red);
//Sets the pdf sound icon.
soundAnnotation.Icon = PdfSoundIcon.Speaker;
//Adds this annotation to a new page.
page.Annotations.Add(soundAnnotation);
//Saves the document to disk.
document.Save("SoundIcon.pdf");
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new sound annotation.
Dim soundAnnotation As New PdfSoundAnnotation(rectangle, "startup.wav")
soundAnnotation.Sound.Encoding = PdfSoundEncoding.Signed
soundAnnotation.Sound.Channels = PdfSoundChannels.Stereo
soundAnnotation.Sound.Bits = 16
soundAnnotation.Color = New PdfColor(Color.Red)
'Sets the pdf sound icon.
soundAnnotation.Icon = PdfSoundIcon.Speaker
'Adds this annotation to a new page.
page.Annotations.Add(soundAnnotation)
'Saves the document to disk.
document.Save("SoundIcon.pdf")
document.Close(True)You can download a complete working sample from GitHub.
URI Annotation
URI annotation is used to navigate to a particular web URI
The following code example explains how to add URI annotation in a PDF document using PdfUriAnnotation.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new Uri Annotation
PdfUriAnnotation uriAnnotation = new PdfUriAnnotation(rectangle, "http://www.google.com");
//Sets Text to uriAnnotation
uriAnnotation.Text = "Uri Annotation";
//Adds this annotation to a new page
page.Annotations.Add(uriAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new rectangle
RectangleF rectangle = new RectangleF(10, 40, 30, 30);
//Creates a new Uri Annotation
PdfUriAnnotation uriAnnotation = new PdfUriAnnotation(rectangle, "http://www.google.com");
//Sets Text to uriAnnotation
uriAnnotation.Text = "Uri Annotation";
//Adds this annotation to a new page
page.Annotations.Add(uriAnnotation);
//Saves the document to disk
document.Save("UriAnnotation.pdf");
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim rectangle As New RectangleF(10, 40, 30, 30)
'Creates a new Uri Annotation
Dim uriAnnotation As New PdfUriAnnotation(rectangle, "http://www.google.com")
'Sets Text to uriAnnotation.
uriAnnotation.Text = "Uri Annotation"
'Adds this annotation to a new page
page.Annotations.Add(uriAnnotation)
'Saves the document to disk.
document.Save("UriAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Document Link Annotation
This annotation is used to navigate to a specific destination within the document.
PdfDocumentLinkAnnotation is used to add a document link annotation in PDF document.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a page
PdfPage page2 = document.Pages.Add();
//Creates a new rectangle
RectangleF docLinkAnnotationRectangle = new RectangleF(10, 40, 30, 30);
//Creates a new document link annotation.
PdfDocumentLinkAnnotation documentLinkAnnotation = new PdfDocumentLinkAnnotation(docLinkAnnotationRectangle);
documentLinkAnnotation.AnnotationFlags = PdfAnnotationFlags.NoRotate;
documentLinkAnnotation.Text = "Document link annotation";
documentLinkAnnotation.Color = new PdfColor(Color.Navy);
//Sets the destination.
documentLinkAnnotation.Destination = new PdfDestination(page2);
documentLinkAnnotation.Destination.Location = new PointF(10, 0);
documentLinkAnnotation.Destination.Zoom = 5;
//Adds this annotation to a new page.
page.Annotations.Add(documentLinkAnnotation);
//Save the document into stream.
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document.
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a page
PdfPage page2 = document.Pages.Add();
//Creates a new rectangle
RectangleF docLinkAnnotationRectangle = new RectangleF(10, 40, 30, 30);
//Creates a new document link annotation.
PdfDocumentLinkAnnotation documentLinkAnnotation = new PdfDocumentLinkAnnotation(docLinkAnnotationRectangle);
documentLinkAnnotation.AnnotationFlags = PdfAnnotationFlags.NoRotate;
documentLinkAnnotation.Text = "Document link annotation";
documentLinkAnnotation.Color = new PdfColor(Color.Navy);
//Sets the destination.
documentLinkAnnotation.Destination = new PdfDestination(page2);
documentLinkAnnotation.Destination.Location = new Point(10, 0);
documentLinkAnnotation.Destination.Zoom = 5;
//Adds this annotation to a new page.
page.Annotations.Add(documentLinkAnnotation);
//Saves the document to disk.
document.Save("DocumentLinkAnnotation.pdf");
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a page
Dim page2 As PdfPage = document.Pages.Add()
'Creates a new rectangle
Dim docLinkAnnotationRectangle As New RectangleF(10, 40, 30, 30)
'Creates a new document link annotation.
Dim documentLinkAnnotation As New PdfDocumentLinkAnnotation(docLinkAnnotationRectangle)
documentLinkAnnotation.AnnotationFlags = PdfAnnotationFlags.NoRotate
documentLinkAnnotation.Text = "Document link annotation"
documentLinkAnnotation.Color = New PdfColor(Color.Navy)
'Sets the destination.
documentLinkAnnotation.Destination = New PdfDestination(page2)
documentLinkAnnotation.Destination.Location = New Point(10, 0)
documentLinkAnnotation.Destination.Zoom = 5
'Adds this annotation to a new page.
page.Annotations.Add(documentLinkAnnotation)
'Saves the document to disk.
document.Save("DocumentLinkAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Redaction Annotation
The essential® PDF supports removing or redacting the sensitive text and images from the PDF documents. The redaction is the process of permanently removing sensitive information from the PDF document, use the PdfRedaction class to remove content. Using the PdfRedactionAnnotation class, you can mark the content to redact or remove it from the PDF pages. The content will be redacted when performing the Flatten operation.
//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page.
PdfPage page = document.Pages.Add();
//Create a new Redaction annotation.
PdfRedactionAnnotation annot = new PdfRedactionAnnotation();
//Assign the Bounds value
annot.Bounds = new Rectangle(100, 120, 100, 100);
//Assign the InnerColor
annot.InnerColor = Color.Black;
//Assign the Bordercolor
annot.BorderColor = Color.Yellow;
//Assign the Textcolor
annot.TextColor = Color.Blue;
//Assign the font
annot.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 10);
//Assign the OverlayText
annot.OverlayText = "REDACTION";
//Assign the TextAlignment
annot.TextAlignment = PdfTextAlignment.Right;
//Assign the RepeatText
annot.RepeatText = true;
annot.SetAppearance(true);
//Add the annotation to the page.
page.Annotations.Add(annot);
//Save the document into stream.
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document.
document.Close(true);//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page.
PdfPage page = document.Pages.Add();
//Create a new Redaction annotation.
PdfRedactionAnnotation annot = new PdfRedactionAnnotation();
//Assign the Bounds value
annot.Bounds = new Rectangle(100, 120, 100, 100);
//Assign the InnerColor
annot.InnerColor = Color.Black;
//Assign the Bordercolor
annot.BorderColor = Color.Yellow;
//Assign the Textcolor
annot.TextColor = Color.Blue;
//Assign the font
annot.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 10);
//Assign the OverlayText
annot.OverlayText = "REDACTION";
//Assign the TextAlignment
annot.TextAlignment = PdfTextAlignment.Right;
//Assign the RepeatText
annot.RepeatText = true;
annot.SetAppearance(true);
//Add the annotation to the page.
page.Annotations.Add(annot);
//Save the document to disk.
document.Save("output.pdf");
//Close the document
document.Close(true);'Create a new PDF document.
Dim document As PdfDocument = New PdfDocument()
'Create a new page.
Dim page As PdfPage = document.Pages.Add()
'Create a New Redaction annotation.
Dim annot As PdfRedactionAnnotation = New PdfRedactionAnnotation()
'Assign the Bounds value
annot.Bounds = New Rectangle(100, 120, 100, 100)
'Assign the InnerColor
annot.InnerColor = Color.Black
'Assign the BorderColor
annot.BorderColor = Color.Yellow
'Assign the TextColor
annot.TextColor = Color.Blue
'Assign the font value
annot.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 10)
'Assign the OverlayText
annot.OverlayText = "REDACTION"
'Assign the TextAlignment
annot.TextAlignment = PdfTextAlignment.Right
'Assign the RepeatText
annot.RepeatText = True
annot.SetAppearance(True)
'Add the annotation to the page.
page.Annotations.Add(annot)
'Save the document to disk.
document.Save("output.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
NOTE
The redaction annotation flatten operation is currently supported in the .NET Framework and ASP.NET Core platforms only, it is not supported in the UWP, Xamarin platforms.
Watermark Annotation
A watermark annotation is used to represent graphics that are expected to be printed at a fixed size and position on a page, regardless of the dimensions of the printed page. PdfWatermarkAnnotation can be used.
The following code example explains how to add a watermark annotation in the PDF document
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the page
PdfLoadedPage lpage = loadedDocument.Pages[0] as PdfLoadedPage;
//Creates PDF watermark annotation
PdfWatermarkAnnotation watermark = new PdfWatermarkAnnotation(new RectangleF(50, 100, 100, 50));
//Sets properties to the annotation
watermark.Opacity = 0.5f;
//Create the appearance of watermark
watermark.Appearance.Normal.Graphics.DrawString("Watermark Text", new PdfStandardFont(PdfFontFamily.Helvetica, 20), PdfBrushes.Red, new RectangleF(0, 0, 200, 50), new PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle));
//Adds the annotation to page
lpage.Annotations.Add(watermark);
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Close the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("input.pdf");
//Get the page
PdfLoadedPage lpage = loadedDocument.Pages[0] as PdfLoadedPage;
//Creates PDF watermark annotation
PdfWatermarkAnnotation watermark = new PdfWatermarkAnnotation(new RectangleF(50, 100, 100, 50));
//Sets properties to the annotation
watermark.Opacity = 0.5f;
//Create the appearance of watermark
watermark.Appearance.Normal.Graphics.DrawString("Watermark Text", new PdfStandardFont(PdfFontFamily.Helvetica, 20), PdfBrushes.Red, new RectangleF(0, 0, 200, 50), new PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle));
//Adds the annotation to page
lpage.Annotations.Add(watermark);
//Saves the document to disk.
loadedDocument.Save("WatermarkAnnotation.pdf");
loadedDocument.Close(true);'Load the existing PDF document
Dim loadedDocument As New PdfLoadedDocument("input.pdf")
'Get the page
Dim lpage As PdfLoadedPage = TryCast(loadedDocument.Pages(0),PdfLoadedPage)
'Creates PDF watermark annotation
Dim watermark As New PdfWatermarkAnnotation(New RectangleF(50, 100, 100, 50))
watermark.Opacity = 0.5f;
'Creates the appearance of watermark
watermark.Appearance.Normal.Graphics.DrawString("Watermark Text", New PdfStandardFont(PdfFontFamily.Helvetica, 20), PdfBrushes.Red, New RectangleF(0, 0, 200, 50), New PdfStringFormat(PdfTextAlignment.Center, PdfVerticalAlignment.Middle))
'Adds annotation to the page
lpage.Annotations.Add(watermark)
'Saves the document to disk.
loadedDocument.Save("WatermarkAnnotation.pdf")
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Text Markup Annotation
You can highlight the Markup Text using the PdfTextMarkupAnnotationType enum of the TextMarkupAnnotation class. This is explained in the following code example.
//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page.
PdfPage page = document.Pages.Add();
FileStream fontStream = new FileStream("arial.ttf", FileMode.Open, FileAccess.Read);
PdfFont pdfFont = new PdfTrueTypeFont(fontStream, 14);
//Create a new PDF brush.
PdfBrush pdfBrush = new PdfSolidBrush(Color.Black);
//Draw text in the new page.
page.Graphics.DrawString("Text Markup Annotation Demo", pdfFont, pdfBrush, new PointF(150, 10));
string markupText = "Text Markup";
SizeF size = pdfFont.MeasureString(markupText);
RectangleF rectangle = new RectangleF(175, 40, size.Width, size.Height);
page.Graphics.DrawString(markupText, pdfFont, pdfBrush, rectangle);
//Create a PDF text markup annotation.
PdfTextMarkupAnnotation markupAnnotation = new PdfTextMarkupAnnotation("Markup annotation", "Markup annotation with highlight style", markupText, new PointF(175, 40), pdfFont);
markupAnnotation.TextMarkupColor = new PdfColor(Color.BlueViolet);
markupAnnotation.TextMarkupAnnotationType = PdfTextMarkupAnnotationType.Highlight;
//Add this annotation to a new page.
page.Annotations.Add(markupAnnotation);
//Save the document to disk.
Save(document, "Output.pdf");
//close the document.
document.Close(true);//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page.
PdfPage page = document.Pages.Add();
//Create a PDF font and font style.
Font font = new Font("Calibri", 10, FontStyle.Bold);
PdfFont pdfFont = new PdfTrueTypeFont(font, false);
//Create a new PDF brush.
PdfBrush pdfBrush = new PdfSolidBrush(Color.Black);
//Draw text in the new page.
page.Graphics.DrawString("Text Markup Annotation Demo", pdfFont, pdfBrush, new PointF(150, 10));
string markupText = "Text Markup";
SizeF size = pdfFont.MeasureString(markupText);
RectangleF rectangle = new RectangleF(175, 40, size.Width, size.Height);
page.Graphics.DrawString(markupText, pdfFont, pdfBrush, rectangle);
//Create a PDF text markup annotation.
PdfTextMarkupAnnotation markupAnnotation = new PdfTextMarkupAnnotation("Markup annotation", "Markup annotation with highlight style", markupText, new PointF(175, 40), pdfFont);
markupAnnotation.TextMarkupColor = new PdfColor(Color.BlueViolet);
markupAnnotation.TextMarkupAnnotationType = PdfTextMarkupAnnotationType.Highlight;
//Add this annotation to a new page.
page.Annotations.Add(markupAnnotation);
//Save the document to disk.
document.Save("Output.pdf");
//close the document.
document.Close(true);'Create a new PDF document.
Dim document As New PdfDocument()
'Create a new page.
Dim page As PdfPage = document.Pages.Add()
'Create a pdf font and pdf font style.
Dim font As New Font("Calibri", 10, FontStyle.Bold)
Dim pdfFont As PdfFont = New PdfTrueTypeFont(font, False)
'Create a new PdfBrush.
Dim pdfBrush As PdfBrush = New PdfSolidBrush(Color.Black)
'Draw text in the new page.
page.Graphics.DrawString("Text Markup Annotation Demo", pdfFont, pdfBrush, New PointF(150, 10))
Dim markupText As String = "Text Markup"
Dim size As SizeF = pdfFont.MeasureString(markupText)
Dim rectangle As New RectangleF(175, 40, size.Width, size.Height)
page.Graphics.DrawString(markupText, pdfFont, pdfBrush, rectangle)
'Create a pdf text markup annotation.
Dim markupAnnotation As New PdfTextMarkupAnnotation("Markup annotation", "Markup annotation with highlight style", markupText, New PointF(175, 40), pdfFont)
markupAnnotation.TextMarkupColor = New PdfColor(Color.BlueViolet)
markupAnnotation.TextMarkupAnnotationType = PdfTextMarkupAnnotationType.Highlight
'Add this annotation to a new page.
page.Annotations.Add(markupAnnotation)
'Save the document to disk.
document.Save("Output.pdf")
'close the document.
document.Close(True)You can download a complete working sample from GitHub.
Cloud border style Annotation
PdfRectangleAnnotation
Cloud border style can be added to the PdfRectangleAnnotation class by using the PdfBorderEffect class.
The following code sample explains how to add cloud border styled rectangle annotation in the PDF document.
//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
// create a rectangle annotation
PdfRectangleAnnotation annotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 200, 100), "rectangle");
//Assign the borderWidth value.
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class.
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity = 2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect.
annotation.BorderEffect = bordereffect;
// Adds the annotation to the page.
page.Annotations.Add(annotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document
document.Close(true);//Create a new PDF document.
PdfDocument document = new PdfDocument ();
//Create a new page
PdfPage page = document.Pages.Add();
//Create a new rectangle annotation.
PdfRectangleAnnotation annotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 200, 100), "rectangle");
//Assign the borderWidth value.
annotation. Border. BorderWidth = 1;
//Assign the color
annotation. Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class.
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity =2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect.
annotation.BorderEffect = bordereffect;
//Add the annotation to the page.
page.Annotations.Add(annotation);
//Save the document to disk.
document.Save("Output.pdf");
//close the document to disk.
document.Close(true);'Create a new PDF document.
Dim document As PdfDocument = New PdfDocument()
'Create a new page.
Dim page As PdfPage = document.Pages.Add()
'Create a new Redaction annotation
Dim annotation As PdfRectangleAnnotation = New PdfRectangleAnnotation(New RectangleF(0, 0, 200, 100), "rectangle")
'Assign the borderWidth value.
annotation.Border.BorderWidth = 1
'Assign the color
annotation.Color = Color.Red
'Assign the InnerColor
annotation.InnerColor = Color.Blue
'Create a new PdfBorderEffect class.
Dim bordereffect As PdfBorderEffect = New PdfBorderEffect()
'Assign the intensity value
bordereffect.Intensity = 2
'Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy
'Assign the BorderEffect.
annotation.BorderEffect = bordereffect
'Add the annotation to the page.
page.Annotations.Add(annotation)
'Save the document to disk.
document.Save("Output.pdf")
'close the document to disk.
document.Close(True)You can download a complete working sample from GitHub.
Polygon Annotation
Cloud border style can be added to the PdfPolygonAnnotation class by using the PdfBorderEffect class.
The following code sample explains how to add cloud border styled polygon annotation in the PDF document.
//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document. Pages. Add ();
//Create points
int[] points = new int[] { 100, 300, 150, 200, 300, 200, 350, 300, 300, 400, 150, 400 };
//Create a new polygon annotation.
PdfPolygonAnnotation annotation = new PdfPolygonAnnotation(points,"polygon");
//Assign the borderWidth value.
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class.
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity =2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect.
annotation.BorderEffect = bordereffect;
//Add the annotation to the page.
page.Annotations.Add(annotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document
document.Close(true);//Create a new PDF document.
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
//Create points
int[] points = new int[] { 100, 300, 150, 200, 300, 200, 350, 300, 300, 400, 150, 400 };
//Create a new polygon annotation.
PdfPolygonAnnotation annotation = new PdfPolygonAnnotation(points,"polygon");
//Assign the borderWidth value.
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class.
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity =2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect.
annotation.BorderEffect = bordereffect;
//Add the annotation to the page.
page.Annotations.Add(annotation);
//Save the document to disk.
document.Save("Output.pdf");
//close the document to disk.
document.Close(true);'Create a New PDF document.
Dim document As PdfDocument = New PdfDocument()
'Create a new page.
Dim page As PdfPage = document.Pages.Add()
'Create points.
Dim points As Integer() = New Integer() {100, 300, 150, 200, 300, 200, 350, 300, 300, 400, 150, 400}
'Create a new polygon annotation.
Dim annotation As PdfPolygonAnnotation = New PdfPolygonAnnotation(points, "polygon")
'Assign the borderWidth value.
annotation.Border.BorderWidth = 1
'Assign the color
annotation.Color = Color.Red
'Assign the InnerColor
annotation.InnerColor = Color.Blue
'Create a new PdfBorderEffect class.
Dim bordereffect As PdfBorderEffect = New PdfBorderEffect()
'Assign the intensity value
bordereffect.Intensity = 2
'Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy
'Assign the BorderEffect.
annotation.BorderEffect = bordereffect
'Add the annotation to the page.
page.Annotations.Add(annotation)
'Save the document to disk.
document.Save("Output.pdf")
'close the document to disk.
document.Close(True)You can download a complete working sample from GitHub.
PdfCircleAnnotation
Cloud border style can be added to the PdfCircleAnnotation class by using the PdfBorderEffect class. The following code sample explains how to add cloud border styled Circle annotation in the PDF document.
//Create a new PDF document
PdfDocument document = new PdfDocument();
//Add a new page
PdfPage page = document.Pages.Add();
//Create a new circle annotation
PdfCircleAnnotation annotation = new PdfCircleAnnotation(new RectangleF(0, 0, 200, 200), "Circle");
//Assign the border width
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity = 2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect to the annotation
annotation.BorderEffect = bordereffect;
//Set appearance for the annotation
annotation.SetAppearance(true);
//Adds the annotation to the page
page.Annotations.Add(annotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document
document.Close(true);//Create a new PDF document
PdfDocument document = new PdfDocument();
//Add a new page
PdfPage page = document.Pages.Add();
//Create a new circle annotation
PdfCircleAnnotation annotation = new PdfCircleAnnotation(new RectangleF(0, 0, 200, 200), "Circle");
//Assign the border width
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class.
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity = 2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect.
annotation.BorderEffect = bordereffect;
//Set appearance for the annotation.
annotation.SetAppearance(true);
//Add the annotation to the page.
page.Annotations.Add(annotation);
//Save the document to disk.
document.Save("Output.pdf");
//Close the document to disk.
document.Close(true);'Create a new PDF document
Dim document As PdfDocument = New PdfDocument()
'Add a new page
Dim page As PdfPage = document.Pages.Add()
'Create a new circle annotation
Dim annotation As PdfCircleAnnotation = New PdfCircleAnnotation(New RectangleF(0, 0, 200, 200), "Circle")
'Assign the border width
annotation.Border.BorderWidth = 1
'Assign the color
annotation.Color = Color.Red
'Assign the InnerColor
annotation.InnerColor = Color.Blue
'Create a new PdfBorderEffect class.
Dim bordereffect As PdfBorderEffect = New PdfBorderEffect()
'Assign the intensity value
bordereffect.Intensity = 2
'Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy
'Assign the BorderEffect.
annotation.BorderEffect = bordereffect
'Set appearance for the annotation.
annotation.SetAppearance(True)
'Add the annotation to the page.
page.Annotations.Add(annotation)
'Save the document to disk.
document.Save("Output.pdf")
'close the document to disk.
document.Close(True)You can download a complete working sample from GitHub.
PdfEllipseAnnotation
Cloud border style can be added to the PdfEllipseAnnotation class by using the PdfBorderEffect class. The following code sample explains how to add cloud border styled Ellipse annotation in the PDF document.
//Create a new PDF document
PdfDocument document = new PdfDocument();
//Add a new page
PdfPage page = document.Pages.Add();
// create a new ellipse annotation
PdfEllipseAnnotation annotation = new PdfEllipseAnnotation(new RectangleF(0, 0, 200,100), "Ellipse");
//Assign the border width
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity = 2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect
annotation.BorderEffect = bordereffect;
//Set appearance for the annotation.
annotation.SetAppearance(true);
// Adds the annotation to the page.
page.Annotations.Add(annotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document
document.Close(true);//Create a new PDF document
PdfDocument document = new PdfDocument();
//Add a new page
PdfPage page = document.Pages.Add();
//Create a new ellipse annotation
PdfEllipseAnnotation annotation = new PdfEllipseAnnotation(new RectangleF(0, 0, 200, 100), "Ellipse");
//Assign the borderWidth value
annotation.Border.BorderWidth = 1;
//Assign the color
annotation.Color = Color.Red;
//Assign the InnerColor
annotation.InnerColor = Color.Blue;
//Create a new PdfBorderEffect class
PdfBorderEffect bordereffect = new PdfBorderEffect();
//Assign the intensity value
bordereffect.Intensity = 2;
//Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy;
//Assign the BorderEffect
annotation.BorderEffect = bordereffect;
//Set appearance for the annotation
annotation.SetAppearance(true);
//Add the annotation to the page.
page.Annotations.Add(annotation);
//Save the document to disk.
document.Save("Output.pdf");
//close the document to disk.
document.Close(true);'Create a new PDF document
Dim document As PdfDocument = New PdfDocument()
'Add a new page.
Dim page As PdfPage = document.Pages.Add()
'Create a new ellipse annotation
Dim annotation As PdfEllipseAnnotation = New PdfEllipseAnnotation(New RectangleF(0, 0, 200, 100), "Ellipse")
'Assign the borderWidth value
annotation.Border.BorderWidth = 1
'Assign the color
annotation.Color = Color.Red
'Assign the InnerColor
annotation.InnerColor = Color.Blue
'Create a new PdfBorderEffect class
Dim bordereffect As PdfBorderEffect = New PdfBorderEffect()
'Assign the intensity value
bordereffect.Intensity = 2
'Assign the cloud style
bordereffect.Style = PdfBorderEffectStyle.Cloudy
'Assign the BorderEffect
annotation.BorderEffect = bordereffect
'Set appearance for the annotation
annotation.SetAppearance(True)
'Add the annotation to the page
page.Annotations.Add(annotation)
'Save the document to disk
document.Save("Output.pdf");
'close the document to disk.
document.Close(True)You can download a complete working sample from GitHub.
Measurement Annotations
Essential® PDF supports interactive measurement annotations, which measures the distance, area, and angle of the line segments.
The following measurement annotation types are supported in Essential® PDF:
Line measurement annotation
The line measurement annotation is displayed as the straight line in the page. The distance of the line is measured automatically when you change the position of the line and is displayed in the pop-up window.
PdfLineMeasurementAnnotation to add a line measurement annotation to the page.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
PdfFont font = new PdfStandardFont(PdfFontFamily.Helvetica, 10f, PdfFontStyle.Regular);
//Specifies the line end points
int[] points = new int[] { 100, 750, 500, 750 };
//Creates the line measurement annotation
PdfLineMeasurementAnnotation lineMeasureAnnotation = new PdfLineMeasurementAnnotation(points);
//Assign author to the line measurement annotation
lineMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the line measurement annotation
lineMeasureAnnotation.Subject = "LineAnnotation";
//Assign unit to the line measurement annotation
lineMeasureAnnotation.Unit = PdfMeasurementUnit.Inch;
//Assign borderWidth to the line measurement annotation
lineMeasureAnnotation.lineBorder.BorderWidth = 2;
//Assign font to the line measurement annotation
lineMeasureAnnotation.Font = font;
//Assign color to the line measurement annotation
lineMeasureAnnotation.Color = new PdfColor(Syncfusion.Drawing.Color.Red);
//Adds the line measurement annotation to a new page
page.Annotations.Add(lineMeasureAnnotation);
MemoryStream stream = new MemoryStream();
//Save the PDF document to stream
document.Save(stream);
stream.Position=0;
//Close the document
document.Close(true);//Creates a new PDF document.
PdfDocument document= new PdfDocument();
//Creates a new page.
PdfPage page = document.Pages.Add();
PdfFont font= new PdfStandardFont(PdfFontFamily.Helvetica, 10f, PdfFontStyle.Regular);
//Specifies the line end points.
int[] points = new int[] { 100, 750, 500, 750 };
//Creates the line measurement annotation
PdfLineMeasurementAnnotation lineMeasureAnnotation = new PdfLineMeasurementAnnotation(points);
//Assign author to the line measurement annotation.
lineMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the line measurement annotation
lineMeasureAnnotation.Subject = "LineAnnotation";
//Assign unit to the line measurement annotation
lineMeasureAnnotation.Unit = PdfMeasurementUnit.Inch;
//Assign borderWidth to the line measurement annotation.
lineMeasureAnnotation.lineBorder.BorderWidth = 2;
//Assign font to the line measurement annotation.
lineMeasureAnnotation.Font = font;
//Assign color to the line measurement annotation.
lineMeasureAnnotation.Color = new PdfColor(Color.Red);
//Adds the line measurement annotation to a new page.
page.Annotations.Add(lineMeasureAnnotation);
//Saves the document to disk.
document.Save("LineMeasurementAnnotation.pdf");
//Close the document.
document.Close(true);//Creates a new PDF document
Dim document As PdfDocument = New PdfDocument
//Creates a new page
Dim page As PdfPage = document.Pages.Add
Dim font As PdfFont = New PdfStandardFont(PdfFontFamily.Helvetica, 10.0!, PdfFontStyle.Regular)
//Specifies the line end points.
Dim points() As Integer = New Integer() {100, 750, 500, 750}
//Creates the line measurement annotation
Dim lineMeasureAnnotation As PdfLineMeasurementAnnotation = New PdfLineMeasurementAnnotation(points)
'Assign author to the line measurement annotation
lineMeasureAnnotation.Author = "Syncfusion"
'Assign subject to the line measurement annotation
lineMeasureAnnotation.Subject = "LineAnnotation"
'Assign unit to the line measurement annotation
lineMeasureAnnotation.Unit = PdfMeasurementUnit.Inch
'Assign borderWidth to the line measurement annotation
lineMeasureAnnotation.lineBorder.BorderWidth = 2
'Assign font to the line measurement annotation
lineMeasureAnnotation.Font = font
'Assign color to the line measurement annotation
lineMeasureAnnotation.Color = New PdfColor(Color.Red)
'Adds the line measurement annotation to a new page
page.Annotations.Add(lineMeasureAnnotation)
'Saves the document to disk
document.Save("LineMeasurementAnnotation.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
Square measurement annotation
The square measurement annotation is displayed as square shape in the page. The area of the square is measured when you change the square bound and is displayed in the pop-up window.
PdfSquareMeasurementAnnotation is used to add a square measurement annotation to the page.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
Syncfusion.Drawing.RectangleF rect = new Syncfusion.Drawing.RectangleF(10, 100, 100, 100);
//Creates the square measurement annotation
PdfSquareMeasurementAnnotation squareMeasureAnnotation = new PdfSquareMeasurementAnnotation(rect);
//Assign author to the square measurement annotation
squareMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the square measurement annotation
squareMeasureAnnotation.Subject = "Square measurement annotation";
//Assign color to the square measurement annotation
squareMeasureAnnotation.Color = new PdfColor(Syncfusion.Drawing.Color.Red);
//Assign measurement unit to the square measurement annotation
squareMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter;
//Adds the square measurement annotation to a page
page.Annotations.Add(squareMeasureAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
stream.Position=0;
//Close the document
document.Close(true);//Creates a new PDF document
PdfDocument document= new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
RectangleF rect = new RectangleF(10, 100, 100,100);
//Creates the square measurement annotation
PdfSquareMeasurementAnnotation squareMeasureAnnotation = new PdfSquareMeasurementAnnotation(rect);
//Assign author to the square measurement annotation
squareMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the square measurement annotation
squareMeasureAnnotation.Subject = "Square measurement annotation";
//Assign color to the square measurement annotation
squareMeasureAnnotation.Color = new PdfColor(Color.Red);
//Assign measurement unit to the square measurement annotation
squareMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter;
//Adds the square measurement annotation to a page
page.Annotations.Add(squareMeasureAnnotation);
//Saves the document to disk
document.Save("SquareMeasurementAnnotation.pdf");
//Close the document
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
Dim rect As New RectangleF(10, 100, 100, 100)
'Creates the square measurement annotation
Dim squareMeasureAnnotation As New PdfSquareMeasurementAnnotation(rect)
'Assign author to the square measurement annotation
squareMeasureAnnotation.Author = "Syncfusion"
'Assign subject to the square measurement annotation
squareMeasureAnnotation.Subject = "Square measurement annotation"
'Assign color to the square measurement annotation
squareMeasureAnnotation.Color = New PdfColor(Color.Red)
'Assign measurement unit to the square measurement annotation
squareMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter
'Adds the square measurement annotation to a page
page.Annotations.Add(squareMeasureAnnotation)
'Saves the document to disk
document.Save("SquareMeasurementAnnotation.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
Circle measurement annotation
The circle measurement annotation is displayed as circle shape in the page. The radius or diameter distance of the circle is measured and the value is displayed in the pop-up window.
PdfCircleMeasurementAnnotation is used to add a circle measurement annotation to the page.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
Syncfusion.Drawing.RectangleF rect = new Syncfusion.Drawing.RectangleF(10, 100, 100, 100);
//Creates the circle measurement annotation
PdfCircleMeasurementAnnotation circleMeasureAnnotation = new PdfCircleMeasurementAnnotation(rect);
//Assign author to the circle measurement annotation
circleMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the circle measurement annotation
circleMeasureAnnotation.Subject = "Circle measurement annotation";
//Assign color to the square measurement annotation
circleMeasureAnnotation.Color = new PdfColor(Syncfusion.Drawing.Color.Red);
//Assign measurement unit to the circle measurement annotation
circleMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter;
//Sets the measurementType to the circle measurement annotation
circleMeasureAnnotation.MeasurementType = PdfCircleMeasurementType.Diameter;
//Adds the circle measurement annotation to a page
page.Annotations.Add(circleMeasureAnnotation);
//Save the document into stream.
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Close the document
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
RectangleF rect = new RectangleF(10, 100, 100, 100);
//Creates the circle measurement annotation
PdfCircleMeasurementAnnotation circleMeasureAnnotation = new PdfCircleMeasurementAnnotation(rect);
//Assign author to the circle measurement annotation
circleMeasureAnnotation.Author = "Syncfusion";
//Assign subject to the circle measurement annotation
circleMeasureAnnotation.Subject = "Circle measurement annotation";
//Assign color to the square measurement annotation
circleMeasureAnnotation.Color = new PdfColor(Color.Red);
//Assign measurement unit to the circle measurement annotation
circleMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter;
//Sets the measurementType to the circle measurement annotation
circleMeasureAnnotation.MeasurementType = PdfCircleMeasurementType.Diameter;
//Adds the circle measurement annotation to a page
page.Annotations.Add(circleMeasureAnnotation);
//Saves the document to disk
document.Save("CircleMeasurementAnnotation.pdf");
//Close the document
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
Dim rect As New RectangleF(10, 100, 100, 100)
'Creates the circle measurement annotation
Dim circleMeasureAnnotation As New PdfCircleMeasurementAnnotation(rect)
'Assign author to the circle measurement annotation
circleMeasureAnnotation.Author = "Syncfusion"
'Assign subject to the circle measurement annotation
circleMeasureAnnotation.Subject = "Circle measurement annotation"
'Assign color to the square measurement annotation
circleMeasureAnnotation.Color = New PdfColor(Color.Red)
'Assign measurement unit to the circle measurement annotation
circleMeasureAnnotation.Unit = PdfMeasurementUnit.Centimeter
'Sets the measurementType to the circle measurement annotation
circleMeasureAnnotation.MeasurementType = PdfCircleMeasurementType.Diameter
'Adds the circle measurement annotation to a page
page.Annotations.Add(circleMeasureAnnotation)
'Saves the document to disk
document.Save("CircleMeasurementAnnotation.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
Angle measurement annotation
The angle measurement annotation calculates the angle between three points and draws arc between three points. The angle of the annotation is displayed in the pop-up window.
PdfAngleMeasurementAnnotation helps you to add angle measurement annotation to the page.
//PDF doesn't support angle measurement annotation C#.NET Cross platforms.//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
PointF[] points = new PointF[] { new PointF(100, 700), new PointF(150, 650), new PointF(100, 600) };
//Creates the angel measurement annotation
PdfAngleMeasurementAnnotation angleMeasureAnnotation = new PdfAngleMeasurementAnnotation(points);
//Set font to the angle measurement annotation
angleMeasureAnnotation.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 12f, PdfFontStyle.Regular);
//Assign color to the angle measurement annotation
angleMeasureAnnotation.Color = Color.Red;
//Adds angle measurement annotation
page.Annotations.Add(angleMeasureAnnotation);
//Saves the document to disk
document.Save("AngleMeasurementAnnotation.pdf");
document.Close(true);'Creates a new PDF document
Dim document As New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
Dim points As PointF() = New PointF() {New PointF(100, 700), New PointF(150, 650), New PointF(100, 600)}
'Creates the angel measurement annotation
Dim angleMeasureAnnotation As New PdfAngleMeasurementAnnotation(points)
'Set font to the angle measurement annotation
angleMeasureAnnotation.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 12.0F, PdfFontStyle.Regular)
'Assign color to the angle measurement annotation
angleMeasureAnnotation.Color = Color.Red
'Adds angle measurement annotation
page.Annotations.Add(angleMeasureAnnotation)
'Saves the document to disk
document.Save("AngleMeasurementAnnotation.pdf")
document.Close(True)You can download a complete working sample from GitHub.
Modifying the annotations
Essential® PDF allows you to modify the annotation of existing document. The following code illustrates this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Gets the first page from the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Gets the first annotation and modify the properties
PdfLoadedPopupAnnotation popUp = annotations[0] as PdfLoadedPopupAnnotation;
popUp.Border = new PdfAnnotationBorder(4, 0, 0);
popUp.Color = new PdfColor(Color.Red);
popUp.Text = "Modified annotation";
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("inputAnnotation.pdf");
//Gets the first page from the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Gets the first annotation and modify the properties
PdfLoadedPopupAnnotation popUp = annotations[0] as PdfLoadedPopupAnnotation;
popUp.Border = new PdfAnnotationBorder(4, 0, 0);
popUp.Color = new PdfColor(Color.Red);
popUp.Text = "Modified annotation";
//Saves the document
lDoc.Save("sample.pdf");
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("inputAnnotation.pdf")
'Gets the first page from the document
Dim page As PdfLoadedPage = TryCast(lDoc.Pages(0), PdfLoadedPage)
'Gets the annotation collections
Dim annotations As PdfLoadedAnnotationCollection = page.Annotations
'Gets the annotation at index 0 and modifying the properties
Dim popUp As PdfLoadedPopupAnnotation = TryCast(annotations(0), PdfLoadedPopupAnnotation)
popUp.Border = New PdfAnnotationBorder(4, 0, 0)
popUp.Color = New PdfColor(Color.Red)
popUp.Text = "Modified annotation"
'Saves the document
lDoc.Save("sample.pdf")
lDoc.Close(True)You can download a complete working sample from GitHub.
Modifying the redaction annotations
The redaction annotations from the existing document can be modified using the Essential® PDF library. You can add, remove, or modify the PdfLoadedRedactionAnnotation class in the existing PDF documents.
The following code sample explains this.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open,FileAccess.Read);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
foreach (PdfAnnotation annot in loadedDocument.Pages[0].Annotations)
{
//Check for the Redaction annotation
if (annot is PdfLoadedRedactionAnnotation)
{
PdfLoadedRedactionAnnotation redactAnnot = annot as PdfLoadedRedactionAnnotation;
//Assign the Bounds values
redactAnnot.Bounds = new RectangleF(50, 50, 100, 100);
//Assign the OverlayText
redactAnnot.OverlayText = "Redaction";
//Assign the InnerColor
redactAnnot.InnerColor = Color.Yellow;
//Assign the BorderColor
redactAnnot.BorderColor = Color.Green;
//Assign the TextColor
redactAnnot.TextColor = Color.Red;
//Assign the TextAlignment
redactAnnot.TextAlignment = PdfTextAlignment.Right;
//Assign the RepeatText
redactAnnot.RepeatText = true;
//Flatten the annotations in the page
redactAnnot.Flatten = true;
}
}
loadedDocument.Redact();
//Save the document into stream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Close the document
loadedDocument.Close(true);//Load the existing PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("input.pdf");
//Get the pages
foreach (PdfAnnotation annot in ldoc.Pages[0].Annotations)
{
//Check for the Redaction annotation
if (annot is PdfLoadedRedactionAnnotation)
{
PdfLoadedRedactionAnnotation redactAnnot = annot as PdfLoadedRedactionAnnotation;
//Assign the Bounds values
redactAnnot.Bounds = new RectangleF(50, 50, 100, 100);
//Assign the OverlayText
redactAnnot.OverlayText = "Redaction";
//Assign the InnerColor
redactAnnot.InnerColor = Color.Yellow;
//Assign the BorderColor
redactAnnot.BorderColor = Color.Green;
//Assign the TextColor
redactAnnot.TextColor = Color.Red;
//Assign the TextAlignment
redactAnnot.TextAlignment = PdfTextAlignment.Right;
//Assign the RepeatText
redactAnnot.RepeatText = true;
//Flatten the annotations in the page
redactAnnot.Flatten = true;
}
}
//save the document
ldoc.Save("output.pdf");
//Close the document
ldoc.Close();'Load the existing PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("output.pdf")
'Get the pages
For Each annot As PdfAnnotation In ldoc.Pages(0).Annotations
'Check for the Redaction annotation
If TypeOf annot Is PdfLoadedRedactionAnnotation Then
Dim redactAnnot As PdfLoadedRedactionAnnotation = TryCast(annot, PdfLoadedRedactionAnnotation)
'Assign the Bounds values
redactAnnot.Bounds = New RectangleF(50, 50, 100, 100)
'Assign the OverlayText
redactAnnot.OverlayText = "Redaction"
'Assign the InnerColor
redactAnnot.InnerColor = Color.Yellow
'Assign the BorderColor
redactAnnot.BorderColor = Color.Green
'Assign the TextColor
redactAnnot.TextColor = Color.Red
'Assign the TextAlignment
redactAnnot.TextAlignment = PdfTextAlignment.Right
'Assign the RepeatText
redactAnnot.RepeatText = True
'Flatten the annotations in the page
redactAnnot.Flatten = True
End If
Next
'save the document
ldoc.Save("output.pdf")
'Close the document
ldoc.Close()NOTE
To modify the redaction annotation from PDF document in ASP.NET Core, you need to include the Syncfusion.Pdf.Imaging.Portable assembly reference in the .NET Core project.
You can download a complete working sample from GitHub.
Removing annotations from an existing PDF
You can remove the annotation from the annotation collection, represented by the PdfLoadedAnnotationCollection of the loaded page. The following code illustrates this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Gets the first page of the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Removes the first annotation
annotations.RemoveAt(0);
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("inputAnnotation.pdf");
//Gets the first page of the document
PdfLoadedPage page = lDoc.Pages[0] as PdfLoadedPage;
//Gets the annotation collection
PdfLoadedAnnotationCollection annotations = page.Annotations;
//Removes the first annotation
annotations.RemoveAt(0);
//Saves the document
lDoc.Save("sample.pdf");
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("inputAnnotation.pdf")
'Gets the first page from the document
Dim page As PdfLoadedPage = TryCast(lDoc.Pages(0), PdfLoadedPage)
'Gets the annotation collection
Dim annotations As PdfLoadedAnnotationCollection = page.Annotations
'Removes the first annotation
annotations.RemoveAt(0)
'Saves the document
lDoc.Save("sample.pdf")
lDoc.Close(True)You can download a complete working sample from GitHub.
Importing annotations from FDF file
FDF stands for Forms Data Format. FDF is a file format for representing annotations present in a PDF document. You can import annotation data from the FDF file to PDF using the ImportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Import annotation data from FDF stream
FileStream fdfStream = new FileStream("Annotations.fdf", FileMode.Open, FileAccess.Read);
lDoc.ImportAnnotations(fdfStream, AnnotationDataFormat.Fdf)
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Import annotation data from FDF file
lDoc.ImportAnnotations("Annotations.fdf", AnnotationDataFormat.Fdf);
//Saves the document
lDoc.Save("Annotation.pdf");
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Import annotation data from FDF file
lDoc.ImportAnnotations("Annotations.fdf", AnnotationDataFormat.Fdf)
'Saves the document
lDoc.Save("Annotation.pdf")
lDoc.Close(True)You can download a complete working sample from GitHub.
Importing annotations from XFDF file
XFDF stands for XML Forms Data Format. XFDF is the XML version of FDF for representing annotations that are contained in a PDF document. You can import annotation data from the XFDF file to PDF using the ImportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Import annotation data from XFDF stream
FileStream xfdfStream = new FileStream("Annotations.xfdf", FileMode.Open, FileAccess.Read);
lDoc.ImportAnnotations(xfdfStream, AnnotationDataFormat.XFdf);
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Import annotation data from XFDF file
lDoc.ImportAnnotations("Annotations.xfdf", AnnotationDataFormat.XFdf);
//Saves the document
lDoc.Save("Annotation.pdf");
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Import annotation data from XFDF file
lDoc.ImportAnnotations("Annotations.xfdf", AnnotationDataFormat.XFdf)
'Saves the document
lDoc.Save("Annotation.pdf")
lDoc.Close(True)You can download a complete working sample from GitHub.
Importing annotations from JSON file
JSON stands for JavaScript Object Notation. It is a collection of key or value pairs and it is used for serializing and transmitting the structured data over a network connection. You can import the annotation data from the JSON file to PDF using the ImportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Import the annotation data from the JSON stream
FileStream jsonStream = new FileStream("Annotations.Json", FileMode.Open, FileAccess.Read);
lDoc.ImportAnnotations(jsonStream, AnnotationDataFormat.Json);
//Save the document into the stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Import the annotation data from the JSON file
lDoc.ImportAnnotations("Annotations.Json", AnnotationDataFormat.Json);
//Saves the document
lDoc.Save("Annotation.pdf");
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Import the annotation data from the JSON file
lDoc.ImportAnnotations("Annotations.Json", AnnotationDataFormat.Json)
'Saves the document
lDoc.Save("Annotation.pdf")
'close the document
lDoc.Close(True)You can download a complete working sample from GitHub.
Exporting annotations to FDF file
To export annotation data to the FDF file from PDF document, you can use the ExportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Export annotation data from FDF stream
Stream fdfStream = new MemoryStream();
lDoc.ExportAnnotations(fdfStream, AnnotationDataFormat.Fdf)
//Close the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Export annotation data to FDF file
lDoc.ExportAnnotations("Annotations.fdf", AnnotationDataFormat.Fdf);
//Close the document
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Export annotation data to FDF file
lDoc.ExportAnnotations("Annotations.fdf", AnnotationDataFormat.Fdf)
'Close the document
lDoc.Close(True)You can download a complete working sample from GitHub.
Exporting annotations to XFDF file
To export annotation data to the XFDF file from PDF document, you can use the ExportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Export annotation data from XFDF stream
Stream xfdfStream = new MemoryStream();
lDoc.ExportAnnotations(xfdfStream, AnnotationDataFormat.XFdf);
//Close the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Export annotation data to XFDF file
lDoc.ExportAnnotations("Annotations.xfdf", AnnotationDataFormat.XFdf);
//Close the document
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Export annotation data to XFDF file
lDoc.ExportAnnotations("Annotations.xfdf", AnnotationDataFormat.XFdf)
'Close the document
lDoc.Close(True)You can download a complete working sample from GitHub.
Exporting annotations to JSON file
To export annotation data to the JSON file from PDF document, you can use the ExportAnnotations method in PdfLoadedDocument class.
//Load the PDF document
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Export the annotation data from the JSON stream
Stream jsonStream = new MemoryStream();
lDoc.ExportAnnotations(jsonStream, AnnotationDataFormat.Json)
//Close the document
lDoc.Close(true);//Loads the document
PdfLoadedDocument lDoc = new PdfLoadedDocument("input.pdf");
//Export the annotation data to the JSON file
lDoc.ExportAnnotations("Annotations.Json", AnnotationDataFormat.Json);
//Close the document
lDoc.Close(true);'Loads the document
Dim lDoc As New PdfLoadedDocument("input.pdf")
'Export the annotation data to the JSON file
lDoc.ExportAnnotations("Annotations.Json", AnnotationDataFormat.Json)
'Close the document
lDoc.Close(True)You can download a complete working sample from GitHub.
Exporting Newly Added Annotations to a JSON File
To export newly added annotation data from a PDF document to a JSON file, use the ExportAnnotations method within the PdfLoadedDocument class.
// Load the PDF document from a file stream
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(docStream);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Create a memory stream to hold the exported annotations in JSON format
Stream jsonStream = new MemoryStream();
// Export annotations to the JSON format
pdfLoadedDocument.ExportAnnotations(jsonStream, AnnotationDataFormat.Json);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);
// Dispose of the memory stream
jsonStream.Dispose();// Load the PDF document from a file stream
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(“Input.pdf”);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Export annotations to the JSON format
pdfLoadedDocument.ExportAnnotations(“Annotation.json”, AnnotationDataFormat.Json);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);' Load the PDF document from a file stream
Dim pdfLoadedDocument As New PdfLoadedDocument("Input.pdf")
' Create a PDF free text annotation
Dim freeText As New PdfFreeTextAnnotation(New RectangleF(10, 0, 50, 50))
' Set properties for the annotation
' Text displayed as markup
freeText.MarkupText = "Free Text with Callout"
' Set the text markup color
freeText.TextMarkupColor = New PdfColor(Color.Black)
' Set font and size
freeText.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 7.0F)
' Set background color
freeText.Color = New PdfColor(Color.Yellow)
' Set border color
freeText.BorderColor = New PdfColor(Color.Red)
' Set border thickness
freeText.Border = New PdfAnnotationBorder(0.5F)
' Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages(0).Annotations.Add(freeText)
' Export annotations to the JSON format
pdfLoadedDocument.ExportAnnotations("Annotation.json", AnnotationDataFormat.Json)
' Close the loaded PDF document
pdfLoadedDocument.Close(True)You can download a complete working sample from GitHub.
Exporting Newly Added Annotations to an FDF File
To export newly added annotation data from a PDF document to an FDF (Forms Data Format) file, you can use the ExportAnnotations method in the PdfLoadedDocument class.
// Load the PDF document from a file stream
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(docStream);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Create a memory stream to hold the exported annotations in FDF format
Stream fdfStream = new MemoryStream();
// Export annotations to the FDF format
pdfLoadedDocument.ExportAnnotations(fdfStream, AnnotationDataFormat.Fdf);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);
// Dispose of the memory stream
fdfStream.Dispose();// Load the PDF document from a file stream
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(“Input.pdf”);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Export annotations to the FDF format
pdfLoadedDocument.ExportAnnotations(“Annotation.fdf”, AnnotationDataFormat.Fdf);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);' Load the PDF document from a file stream
Dim pdfLoadedDocument As New PdfLoadedDocument("Input.pdf")
' Create a PDF free text annotation
Dim freeText As New PdfFreeTextAnnotation(New RectangleF(10, 0, 50, 50))
' Set properties for the annotation
' Text displayed as markup
freeText.MarkupText = "Free Text with Callout"
' Set the text markup color
freeText.TextMarkupColor = New PdfColor(Color.Black)
' Set font and size
freeText.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 7.0F)
' Set background color
freeText.Color = New PdfColor(Color.Yellow)
' Set border color
freeText.BorderColor = New PdfColor(Color.Red)
' Set border thickness
freeText.Border = New PdfAnnotationBorder(0.5F)
' Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages(0).Annotations.Add(freeText)
' Export annotations to the FDF format
pdfLoadedDocument.ExportAnnotations("Annotation.fdf", AnnotationDataFormat.Fdf)
' Close the loaded PDF document
pdfLoadedDocument.Close(True)You can download a complete working sample from GitHub.
Exporting Newly Added Annotations to an XFDF File
To export newly added annotation data from a PDF document to an XFDF (XML Forms Data Format) file, you can use the ExportAnnotations method in the PdfLoadedDocument class.
// Load the PDF document from a file stream
FileStream docStream = new FileStream("input.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(docStream);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Create a memory stream to hold the exported annotations in JSON format
Stream xfdfStream = new MemoryStream();
// Export annotations to the XFDF format
pdfLoadedDocument.ExportAnnotations(xfdfStream, AnnotationDataFormat.XFdf);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);
// Dispose of the memory stream
xfdfStream.Dispose();// Load the PDF document from a file stream
PdfLoadedDocument pdfLoadedDocument = new PdfLoadedDocument(“Input.pdf”);
// Create a PDF free text annotation
PdfFreeTextAnnotation freeText = new PdfFreeTextAnnotation(new RectangleF(10, 0, 50, 50));
// Set properties for the annotation
// Text displayed as markup
freeText.MarkupText = "Free Text with Callout";
// Set the text markup color
freeText.TextMarkupColor = new PdfColor(Color.Black);
// Set font and size
freeText.Font = new PdfStandardFont(PdfFontFamily.Helvetica, 7f);
// Set background color
freeText.Color = new PdfColor(Color.Yellow);
// Set border color
freeText.BorderColor = new PdfColor(Color.Red);
// Set border thickness
freeText.Border = new PdfAnnotationBorder(.5f);
// Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages[0].Annotations.Add(freeText);
// Export annotations to the XFDF format
pdfLoadedDocument.ExportAnnotations(“Annotation.xfdf”, AnnotationDataFormat.XFdf);
// Close the loaded PDF document
pdfLoadedDocument.Close(true);' Load the PDF document from a file stream
Dim pdfLoadedDocument As New PdfLoadedDocument("Input.pdf")
' Create a PDF free text annotation
Dim freeText As New PdfFreeTextAnnotation(New RectangleF(10, 0, 50, 50))
' Set properties for the annotation
' Text displayed as markup
freeText.MarkupText = "Free Text with Callout"
' Set the text markup color
freeText.TextMarkupColor = New PdfColor(Color.Black)
' Set font and size
freeText.Font = New PdfStandardFont(PdfFontFamily.Helvetica, 7.0F)
' Set background color
freeText.Color = New PdfColor(Color.Yellow)
' Set border color
freeText.BorderColor = New PdfColor(Color.Red)
' Set border thickness
freeText.Border = New PdfAnnotationBorder(0.5F)
' Add the annotation to the first page of the PDF
pdfLoadedDocument.Pages(0).Annotations.Add(freeText)
' Export annotations to the XFDF format
pdfLoadedDocument.ExportAnnotations("Annotation.xfdf", AnnotationDataFormat.XFdf)
' Close the loaded PDF document
pdfLoadedDocument.Close(True)You can download a complete working sample from GitHub.
NOTE
In our PDF library, font resources are embedded into the document during the save operation. If a newly created annotation uses the PdfTrueTypeFont, its font resources will not be exported when exporting the PdfAnnotation. To ensure proper export of PdfAnnotation with PdfTrueTypeFont, we recommend saving the document before exporting the annotation.
Adding comments and review status to the PDF annotation
The PDF annotations may have an author-specific state associated with them. The state is not specified in the annotation itself, but it represents a separate text annotation (Popup Annotation).
The Essential® PDF supports adding the annotation comments and review status to the PDF document annotations.
Adding comments to the PDF annotation
The following code example explains how to add comments to the PDF annotation.
//Create a new PDF document
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
//Create new rectangle annotation
PdfRectangleAnnotation rectangleAnnotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 100, 50), "Rectangle Annotation");
//Set author
rectangleAnnotation.Author = "Syncfusion";
rectangleAnnotation.Border.BorderWidth = 1;
rectangleAnnotation.Color = Color.Red;
rectangleAnnotation.ModifiedDate = DateTime.Now;
//Create a new comment annotation
PdfPopupAnnotation comment = new PdfPopupAnnotation();
//Set author
comment.Author = "John";
//Set Text
comment.Text = "This is first comment";
//Set modification date
comment.ModifiedDate = DateTime.Now;
//Set subject
comment.Subject = "Annotation Comments";
//Add the comment to the annotation
rectangleAnnotation.Comments.Add(comment);
//Add the annotation to the PDF page
page.Annotations.Add(rectangleAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Create a new PDF document
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
//Create new rectangle annotation
PdfRectangleAnnotation rectangleAnnotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 100, 50), "Rectangle Annotation");
//Set author
rectangleAnnotation.Author = "Syncfusion";
rectangleAnnotation.Border.BorderWidth = 1;
rectangleAnnotation.Color = Color.Red;
rectangleAnnotation.ModifiedDate = DateTime.Now;
//Create a new comment annotation
PdfPopupAnnotation comment = new PdfPopupAnnotation();
//Set author
comment.Author = "John";
//Set comment text
comment.Text = "This is first comment";
//Set modification date
comment.ModifiedDate = DateTime.Now;
//Set subject
comment.Subject = "Annotation Comments";
//Add the comments to the annotation
rectangleAnnotation.Comments.Add(comment);
//Add the annotation to the PDF page
page.Annotations.Add(rectangleAnnotation);
//Save the document to disk
document.Save("Output.pdf");
//Close the document
document.Close(true);'Create a new PDF document
Dim document As PdfDocument = New PdfDocument
'Create a new page
Dim page As PdfPage = document.Pages.Add
'Create new rectangle annotation
Dim rectangleAnnotation As PdfRectangleAnnotation = New PdfRectangleAnnotation(New RectangleF(0, 0, 100, 50), "Rectangle Annotation")
'Set author
rectangleAnnotation.Author = "Syncfusion"
rectangleAnnotation.Border.BorderWidth = 1
rectangleAnnotation.Color = Color.Red
rectangleAnnotation.ModifiedDate = DateTime.Now
'Create a new comment annotation
Dim comment As PdfPopupAnnotation = New PdfPopupAnnotation
'Set author
comment.Author = "John"
'Set Text
comment.Text = "This is first comment"
'Set modification date.
comment.ModifiedDate = DateTime.Now
'Set subject
comment.Subject = "Annotation Comments"
'Add the comment to the annotation.
rectangleAnnotation.Comments.Add(comment)
'Add the annotation to the PDF page.
page.Annotations.Add(rectangleAnnotation)
'Save the document to disk.
document.Save("Output.pdf")
'Close the document
document.Close(true)You can download a complete working sample from GitHub.
To add comments PdfPopupAnnotation class to an existing PDF document using PDFLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Get the existing PDF page
PdfLoadedPage lpage = lDoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Create a new comment annotation
PdfPopupAnnotation comment = new PdfPopupAnnotation();
//Set author
comment.Author = "John";
//Set Text
comment.Text = "This is first comment";
//Set modification date
comment.ModifiedDate = DateTime.Now;
//Set subject
comment.Subject = "Annotation Comments";
//Add the comments to the annotation
loadedRectangleAnnotation.Comments.Add(comment);
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing PDF annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Create a new comment annotation
PdfPopupAnnotation comment = new PdfPopupAnnotation();
//Set author
comment.Author = "John";
//Set Text
comment.Text = "This is first comment";
//Set modification date
comment.ModifiedDate = DateTime.Now;
//Set subject
comment.Subject = "Annotation Comments";
//Add the comment to the annotation
loadedRectangleAnnotation.Comments.Add(comment);
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Load the PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation = CType(annots(0),PdfLoadedRectangleAnnotation)
'Get the existing rectangle annotation
Dim comment As PdfPopupAnnotation = New PdfPopupAnnotation
'Set author
comment.Author = "John"
'Set Text
comment.Text = "This is first comment"
'Set modification date
comment.ModifiedDate = DateTime.Now
'Set subject
comment.Subject = "Annotation Comments"
'Add the comment to the annotation.
loadedRectangleAnnotation.Comments.Add(comment)
'Save the document
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
Adding review status to the PDF annotation
| State model | State | Description |
|---|---|---|
| Marked | Marked | The annotation has been marked by the user. |
| Unmarked | The annotation has not been marked by the user (the default). | |
| Review | Accepted | The user agrees with the change. |
| Rejected | The user disagrees with the change. | |
| Canceled | The change has been canceled. | |
| Completed | The changes has been completed. | |
| None | The user has indicated nothing about the change (the default). |
You can add a review status in a newly created PDF annotation using PdfAnnotationState Enum as shown the following code snippet.
//Create a new PDF document
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
//Create new rectangle annotation
PdfRectangleAnnotation rectangleAnnotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 100, 50), "Rectangle Annotation");
//Set author
rectangleAnnotation.Author = "Syncfusion";
rectangleAnnotation.Border.BorderWidth = 1;
rectangleAnnotation.Color = Color.Red;
rectangleAnnotation.ModifiedDate = DateTime.Now;
//Create a new review annotation
PdfPopupAnnotation review = new PdfPopupAnnotation();
//Set author
review.Author = "John";
//Set review state model
review.StateModel = PdfAnnotationStateModel.Review;
//Set review state
review.State = PdfAnnotationState.Accepted;
//Set modification date
review.ModifiedDate = DateTime.Now;
//Add the review to the annotation
rectangleAnnotation.ReviewHistory.Add(review);
//Add the annotation to the PDF page
page.Annotations.Add(rectangleAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Create a new PDF document
PdfDocument document = new PdfDocument();
//Create a new page
PdfPage page = document.Pages.Add();
//Create new rectangle annotation
PdfRectangleAnnotation rectangleAnnotation = new PdfRectangleAnnotation(new RectangleF(0, 0, 100, 50), "Rectangle Annotation");
//Set author
rectangleAnnotation.Author = "Syncfusion";
rectangleAnnotation.Border.BorderWidth = 1;
rectangleAnnotation.Color = Color.Red;
rectangleAnnotation.ModifiedDate = DateTime.Now;
//Create a new review annotation
PdfPopupAnnotation review = new PdfPopupAnnotation();
//Set author
review.Author = "John";
//Set review state model
review.StateModel = PdfAnnotationStateModel.Review;
//Set review state
review.State = PdfAnnotationState.Accepted;
//Set modification date
review.ModifiedDate = DateTime.Now;
//Add the review to the annotation
rectangleAnnotation.ReviewHistory.Add(review);
//Add the annotation to the PDF page
page.Annotations.Add(rectangleAnnotation);
//Save the document to disk
document.Save("Output.pdf");
//Close the document
document.Close(true);'Create a new PDF document
Dim document As PdfDocument = New PdfDocument
'Create a new page
Dim page As PdfPage = document.Pages.Add
'Create new rectangle annotation
Dim rectangleAnnotation As PdfRectangleAnnotation = New PdfRectangleAnnotation(New RectangleF(0, 0, 100, 50), "Rectangle Annotation")
'Set author
rectangleAnnotation.Author = "Syncfusion"
rectangleAnnotation.Border.BorderWidth = 1
rectangleAnnotation.Color = Color.Red
rectangleAnnotation.ModifiedDate = DateTime.Now
'Create a new review annotation
Dim review As PdfPopupAnnotation = New PdfPopupAnnotation
'Set author
review.Author = "John"
'Set review state model
review.StateModel = PdfAnnotationStateModel.Review
'Set review state
review.State = PdfAnnotationState.Accepted
'Set modification date.
review.ModifiedDate = DateTime.Now
'Add the review to the annotation.
rectangleAnnotation.ReviewHistory.Add(review)
'Add the annotation to the PDF page.
page.Annotations.Add(rectangleAnnotation)
'Save the document to disk.
document.Save("Output.pdf")
'Close the document
document.Close(true)You can download a complete working sample from GitHub.
To add the review status PdfAnnotationState Enum to an existing PDF document using PDFLoadedDocument class.The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument lDoc = new PdfLoadedDocument(docStream);
//Get the existing PDF page
PdfLoadedPage lpage = lDoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Create a new review annotation
PdfPopupAnnotation review = new PdfPopupAnnotation();
//Set author
review.Author = "John";
//Set review state model
review.StateModel = PdfAnnotationStateModel.Review;
//Set review state
review.State = PdfAnnotationState.Accepted;
//Set modification date
review.ModifiedDate = DateTime.Now;
//Add the review to the annotation
loadedRectangleAnnotation.ReviewHistory.Add(review);
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
lDoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Create a new review annotation
PdfPopupAnnotation review = new PdfPopupAnnotation();
//Set author
review.Author = "John";
//Set review state model
review.StateModel = PdfAnnotationStateModel.Review;
//Set review state
review.State = PdfAnnotationState.Accepted;
//Set modification date
review.ModifiedDate = DateTime.Now;
//Add the review to the annotation
loadedRectangleAnnotation.ReviewHistory.Add(review);
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Load the existing PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation = CType(annots(0),PdfLoadedRectangleAnnotation)
'Get the existing rectangle annotation
Dim review As PdfPopupAnnotation = New PdfPopupAnnotation
'Set author
review.Author = "John"
'Set review state model
review.StateModel = PdfAnnotationStateModel.Review
'Set review state
review.State = PdfAnnotationState.Accepted
'Set modification date
review.ModifiedDate = DateTime.Now
'Add the review to the annotation.
loadedRectangleAnnotation.ReviewHistory.Add(review)
'Save the document
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
Removing comments and review status from PDF annotation
The Essential® PDF supports removing comments and reviewing status from the PDF annotation.
The following code example explains how to remove comments using RemoveAt method from the existing PDF annotation.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument ldoc = new PdfLoadedDocument(docStream);
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation comments collection
PdfLoadedPopupAnnotationCollection commentsCollection = loadedRectangleAnnotation.Comments;
// Remove comments by index
commentsCollection.RemoveAt(0);
//Save the document into stream
MemoryStream stream = new MemoryStream();
ldoc.Save(stream);
//Closes the document
ldoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation comments collection
PdfLoadedPopupAnnotationCollection commentsCollection = loadedRectangleAnnotation.Comments;
// Remove comments by index
commentsCollection.RemoveAt(0);
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Load the PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")'Load the PDF page
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation =CType(annots(0),PdfLoadedRectangleAnnotation)
'Get the annotation comments collection
Dim commentsCollection As PdfLoadedPopupAnnotationCollection = loadedRectangleAnnotation.Comments
' Remove comments by index
commentsCollection.RemoveAt(0)
'Save the document
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
To remove review status RemoveAt method to an existing PDF document using PDFLoadedDocument class. The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument ldoc = new PdfLoadedDocument(docStream);
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation reviewcollection
PdfLoadedPopupAnnotationCollection reviewCollection = loadedRectangleAnnotation.ReviewHistory;
//Remove review status by index
reviewCollection.RemoveAt(0);
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
ldoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation review collection
PdfLoadedPopupAnnotationCollection reviewCollection = loadedRectangleAnnotation.ReviewHistory;
// Remove review status by index
reviewCollection.RemoveAt(0);
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Loaded the PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation = CType(annots(0),PdfLoadedRectangleAnnotation)
'Get the annotation review collection
Dim reviewCollection As PdfLoadedPopupAnnotationCollection = loadedRectangleAnnotation.ReviewHistory
' Remove review status by index
reviewCollection.RemoveAt(0)
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
Modifying comments and review status
The Essential® PDF supports modifying comments using Comments property and reviewing status using PdfAnnotationState Enum in the PDF annotation.
The following code example explains how to modify comments in the existing PDF annotation.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument ldoc = new PdfLoadedDocument(docStream);
//Load the PDF document page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Load the annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation comments collection
PdfLoadedPopupAnnotationCollection commentsCollection = loadedRectangleAnnotation.Comments;
//Get the modified comment
PdfLoadedPopupAnnotation loadedComments = commentsCollection[0];
//Modify the comment Text
loadedComments.Text = "This is the modified comments";
//Save the document into stream
MemoryStream stream = new MemoryStream();
ldoc.Save(stream);
//Closes the document
ldoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation comments collection
PdfLoadedPopupAnnotationCollection commentsCollection = loadedRectangleAnnotation.Comments;
//Get the modified comments
PdfLoadedPopupAnnotation loadedComments = commentsCollection[0];
//Modify the comments Text
loadedComments.Text = "This is the modified comment";
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Load the PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation = CType(annots(0),PdfLoadedRectangleAnnotation)
'Get the annotation comments collection
Dim commentsCollection As PdfLoadedPopupAnnotationCollection = loadedRectangleAnnotation.Comments
'Get the modified comment
Dim loadedComments As PdfLoadedPopupAnnotation = commentsCollection(0)
' Modify the comment Text
loadedComments.Text = "This is the modified comment"
'Save the document
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
To modify review status PdfAnnotationState Enum to an existing PDF document using PDFLoadedDocument class. The following code example explain this.
//Load the PDF document
FileStream docStream = new FileStream("inputAnnotation.pdf", FileMode.Open, FileAccess.Read);
PdfLoadedDocument ldoc = new PdfLoadedDocument(docStream);
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation review collection
PdfLoadedPopupAnnotationCollection reviewCollection = loadedRectangleAnnotation.ReviewHistory;
// Get the modified review state
PdfLoadedPopupAnnotation loadedReview = reviewCollection[0];
// Modify the review State
loadedReview.State = PdfAnnotationState.Rejected;
//Save the document into stream
MemoryStream stream = new MemoryStream();
lDoc.Save(stream);
//Closes the document
ldoc.Close(true);//Load the PDF document
PdfLoadedDocument ldoc = new PdfLoadedDocument("Input.pdf");
//Get the existing PDF page
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing annotations
PdfLoadedAnnotationCollection annots = lpage.Annotations;
//Get the existing rectangle annotation
PdfLoadedRectangleAnnotation loadedRectangleAnnotation = annots[0] as PdfLoadedRectangleAnnotation;
//Get the annotation review collection
PdfLoadedPopupAnnotationCollection reviewCollection = loadedRectangleAnnotation.ReviewHistory;
// Get the modified review state
PdfLoadedPopupAnnotation loadedReview = reviewCollection[0];
// Modify the review State
loadedReview.State = PdfAnnotationState.Rejected;
//Save the document
ldoc.Save("Output.pdf");
//Close the document
ldoc.Close(true);'Loaded the PDF document
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0),PdfLoadedPage)
'Get the existing annotations
Dim annots As PdfLoadedAnnotationCollection = lpage.Annotations
'Get the existing rectangle annotation
Dim loadedRectangleAnnotation As PdfLoadedRectangleAnnotation = CType(annots(0),PdfLoadedRectangleAnnotation)
'Get annotation review collection
Dim reviewCollection As PdfLoadedPopupAnnotationCollection = loadedRectangleAnnotation.ReviewHistory
Dim loadedReview As PdfLoadedPopupAnnotation = reviewCollection(0)
' Modify the review State
loadedReview.State = PdfAnnotationState.Rejected
'Save the document
ldoc.Save("Output.pdf")
'Close the document
ldoc.Close(true)You can download a complete working sample from GitHub.
Retrieve review status and comments from PDF annotation
The PDF annotations may have an author-specific state associated with them. The state is not specified in the annotation itself, but it represents a separate text annotation (Popup Annotation).
The Essential® PDF supports retrieving the annotation comments and review history from the existing PDF document annotations.
Retrieve review status from PDF annotation
You can retrieve the annotation review history from the existing PDF document annotations through the ReviewHistory property.
//Get stream from an existing PDF document.
FileStream docStream = new FileStream(Path.GetFullPath(@"Data/Input.pdf"), FileMode.Open, FileAccess.Read);
//Load the PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the existing PDF page.
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Get the annotation.
PdfLoadedRectangleAnnotation rectangleAnnotation = loadedPage.Annotations[0] as PdfLoadedRectangleAnnotation;
//Get the review history collection for the annotation.
PdfLoadedPopupAnnotationCollection reviewCollection = rectangleAnnotation.ReviewHistory;
//Iterate through the review history collection.
foreach (PdfLoadedPopupAnnotation review in reviewCollection)
{
//Get the author of the annotation.
string author = review.Author;
//Get the state of the annotation.
PdfAnnotationState state = review.State;
//Get the state model of the annotation.
PdfAnnotationStateModel model = review.StateModel;
Console.WriteLine("Author of the reviewer: " + author + "\r\nState: " + state + "\r\nState Model: " + model);
}
//Closes the document.
loadedDocument.Close(true);//Get stream from an existing PDF document.
FileStream docStream = new FileStream(Path.GetFullPath(@"Data/Input.pdf"), FileMode.Open, FileAccess.Read);
//Load the PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the existing PDF page.
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Get the annotation.
PdfLoadedRectangleAnnotation rectangleAnnotation = loadedPage.Annotations[0] as PdfLoadedRectangleAnnotation;
//Get the review history collection for the annotation.
PdfLoadedPopupAnnotationCollection reviewCollection = rectangleAnnotation.ReviewHistory;
//Iterate through the review history collection.
foreach (PdfLoadedPopupAnnotation review in reviewCollection)
{
//Get the author of the annotation.
string author = review.Author;
//Get the state of the annotation.
PdfAnnotationState state = review.State;
//Get the state model of the annotation.
PdfAnnotationStateModel model = review.StateModel;
Console.WriteLine("Author of the reviewer: " + author + "\r\nState: " + state + "\r\nState Model: " + model);
}
//Closes the document.
loadedDocument.Close(true);'Get stream from an existing PDF document.
Dim docStream As New FileStream(Path.GetFullPath("Data/Input.pdf"), FileMode.Open, FileAccess.Read)
'Load the PDF document.
Dim loadedDocument As New PdfLoadedDocument(docStream)
'Get the existing PDF page.
Dim loadedPage As PdfLoadedPage = TryCast(loadedDocument.Pages(0), PdfLoadedPage)
'Get the annotation.
Dim rectangleAnnotation As PdfLoadedRectangleAnnotation = TryCast(loadedPage.Annotations(0), PdfLoadedRectangleAnnotation)
'Get the review history collection for the annotation.
Dim reviewCollection As PdfLoadedPopupAnnotationCollection = rectangleAnnotation.ReviewHistory
'Iterate through the review history collection.
For Each review As PdfLoadedPopupAnnotation In reviewCollection
'Get the author of the annotation.
Dim author As String = review.Author
'Get the state of the annotation.
Dim state As PdfAnnotationState = review.State
'Get the state model of the annotation.
Dim model As PdfAnnotationStateModel = review.StateModel
Console.WriteLine("Author of the reviewer: " & author & vbCrLf & "State: " & state.ToString() & vbCrLf & "State Model: " & model.ToString())
Next
'Closes the document.
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Retrieve comments from PDF annotation
The following code example explains how to retrieve the annotation comments from the existing PDF document annotations using Comments property.
//Get stream from the existing PDF document.
FileStream docStream = new FileStream(Path.GetFullPath(@"Data/Input.pdf"), FileMode.Open, FileAccess.Read);
//Load the PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the existing PDF page.
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Get the annotation.
PdfLoadedRectangleAnnotation rectangleAnnotation = loadedPage.Annotations[0] as PdfLoadedRectangleAnnotation;
//Get the comments of the annotation.
PdfLoadedPopupAnnotationCollection commentsCollection = rectangleAnnotation.Comments;
//Iterate through the comments collection.
foreach (PdfLoadedPopupAnnotation comment in commentsCollection)
{
//Get the author of the comment.
string author = comment.Author;
//Get the content
string content = comment.Text;
Console.WriteLine("Author of the comment: " + author + "\r\nContent: " + content);
}
//Closes the document.
loadedDocument.Close(true);//Get stream from the existing PDF document.
FileStream docStream = new FileStream(Path.GetFullPath(@"Data/Input.pdf"), FileMode.Open, FileAccess.Read);
//Load the PDF document.
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(docStream);
//Get the existing PDF page.
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Get the annotation.
PdfLoadedRectangleAnnotation rectangleAnnotation = loadedPage.Annotations[0] as PdfLoadedRectangleAnnotation;
//Get the comments of the annotation.
PdfLoadedPopupAnnotationCollection commentsCollection = rectangleAnnotation.Comments;
//Iterate through the comments collection.
foreach (PdfLoadedPopupAnnotation comment in commentsCollection)
{
//Get the author of the comment.
string author = comment.Author;
//Get the content
string content = comment.Text;
Console.WriteLine("Author of the comment: " + author + "\r\nContent: " + content);
}
//Closes the document.
loadedDocument.Close(true);'Get stream from the existing PDF document.
Dim docStream As New FileStream(Path.GetFullPath("Data/Input.pdf"), FileMode.Open, FileAccess.Read)
'Load the PDF document.
Dim loadedDocument As New PdfLoadedDocument(docStream)
'Get the existing PDF page.
Dim loadedPage As PdfLoadedPage = TryCast(loadedDocument.Pages(0), PdfLoadedPage)
'Get the annotation.
Dim rectangleAnnotation As PdfLoadedRectangleAnnotation = TryCast(loadedPage.Annotations(0), PdfLoadedRectangleAnnotation)
'Get the comments of the annotation.
Dim commentsCollection As PdfLoadedPopupAnnotationCollection = rectangleAnnotation.Comments
'Iterate through the comments collection.
For Each comment As PdfLoadedPopupAnnotation In commentsCollection
'Get the author of the comment.
Dim author As String = comment.Author
'Get the content
Dim content As String = comment.Text
Console.WriteLine("Author of the comment: " & author & vbCrLf & "Content: " & content)
Next
'Close the document.
loadedDocument.Close(True)You can download a complete working sample from GitHub.
Printing Annotations
The Essential® PDF supports printing the annotation in a PDF document by setting the annotation flag to Print using the AnnotationFlags property.
The following code example illustrates how to print annotation in the PDF document.
//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new PDF rubber stamp annotation
RectangleF rectangle = new RectangleF(40, 60, 80, 20);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation");
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft;
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Set the AnnotationFlags to print
rubberStampAnnotation.AnnotationFlags = PdfAnnotationFlags.Print;
//Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation);
//Save the document into stream
MemoryStream stream = new MemoryStream();
document.Save(stream);
//Closes the document
document.Close(true);//Creates a new PDF document
PdfDocument document = new PdfDocument();
//Creates a new page
PdfPage page = document.Pages.Add();
//Creates a new PDF rubber stamp annotation
RectangleF rectangle = new RectangleF(40, 60, 80, 20);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation");
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft;
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Set the AnnotationFlags to print
rubberStampAnnotation.AnnotationFlags = PdfAnnotationFlags.Print;
//Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation);
//Saves the document
document.Save("RubberStamp.pdf");
//Close the document
document.Close(true);'Creates a new PDF document
Dim document As PdfDocument = New PdfDocument()
'Creates a new page
Dim page As PdfPage = document.Pages.Add()
'Creates a new PDF rubber stamp annotation
Dim rectangle As RectangleF = New RectangleF(40, 60, 80, 20)
Dim rubberStampAnnotation As PdfRubberStampAnnotation = New
PdfRubberStampAnnotation(rectangle, " Text Rubber Stamp Annotation")
rubberStampAnnotation.Icon = PdfRubberStampAnnotationIcon.Draft
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation"
'Set the AnnotationFlags to print
rubberStampAnnotation.AnnotationFlags = PdfAnnotationFlags.Print
'Adds annotation to the page
page.Annotations.Add(rubberStampAnnotation)
'Saves the document
document.Save("RubberStamp.pdf")
'Close the document
document.Close(True)You can download a complete working sample from GitHub.
The following table explains annotation flags.
|
Member |
Meaning |
|---|---|
|
Invisible |
If set, do not display the annotation if it does not belong to one of the standard annotation types and no annotation handler is available. |
|
Hidden |
If set, do not display or print the annotation, or allow user interact with annotation, regardless of annotation type or annotation handler. |
|
Print |
If set, prints the annotation when the page is printed. |
|
NoZoom |
If set, do not scale the annotation’s appearance to match the magnification of the page. |
|
NoRotate |
If set, do not rotate the annotation’s appearance to match the rotation of the page. |
|
NoView |
If set, do not display the annotation on the screens or allow user interact with annotation. |
|
ReadOnly |
If set, do not allow user interact with annotation. |
|
Locked |
If set, do not allow the annotation to be deleted or its properties to be modified by the user. |
|
ToggleNoView |
If set, inverts the interpretation of the NoView flat for certain events. |
Add Custom Stamp using Rubber Stamp Annotation
Essential® PDF supports adding custom stamp in an existing PDF document by using the PdfRubberStampAnnotation class along with different appearance settings through PdfAppearance. This custom stamp is movable and resizable.
Rubber stamp annotation displays text or graphics intended to look like it is stamped on the page with a rubber stamp. When opened, it displays a pop-up window containing the text of the associated note.
The following code snippet explains how to add custom stamp in an existing PDF document using rubber stamp annotation.
//Load an existing PDF document
FileStream inputStream = new FileStream("Input.pdf", FileMode.Open);
PdfLoadedDocument loadedDocument = new PdfLoadedDocument(inputStream);
//Get the page from loaded PDF document
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Create a new pdf rubber stamp annotation
RectangleF rectangleF = new RectangleF(350, 20, 200, 80);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangleF);
//Custom stamp the rubber stamp annotation
PdfSolidBrush brush = new PdfSolidBrush(new PdfColor(Color.FromArgb(255, 173, 216, 230)));
PdfPath path = RoundedRect(new RectangleF(0, 0, 200, 80), 20);
rubberStampAnnotation.Appearance.Normal.Graphics.DrawPath(brush, path);
//Add text in rubber stamp annotation
PdfFont font = new PdfStandardFont(PdfFontFamily.Helvetica, 12, PdfFontStyle.Bold);
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString("DD/2018/1234567890", font, PdfBrushes.Black, new PointF(10, 20));
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString(DateTime.Now.ToString("dd-MM-yyyy HH:mm:ss"), font, PdfBrushes.Black, new PointF(10, 40));
//Set the content of annotation
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Add annotation to the page
loadedPage.Annotations.Add(rubberStampAnnotation);
//Saving the PDF to the MemoryStream
MemoryStream stream = new MemoryStream();
loadedDocument.Save(stream);
//Close the instance of PdfLoadedDocument
loadedDocument.Close(true);
public static PdfPath RoundedRect(RectangleF bounds, int radius)
{
int diameter = radius * 2;
SizeF size = new SizeF(diameter, diameter);
RectangleF arc = new RectangleF(bounds.Location, size);
PdfPath path = new PdfPath();
if (radius == 0)
{
path.AddRectangle(bounds);
return path;
}
//Draw the top left arc
path.AddArc(arc, 180, 90);
//Draw the top right arc
arc.X = bounds.Right - diameter;
path.AddArc(arc, 270, 90);
//Draw the bottom right arc
arc.Y = bounds.Bottom - diameter;
path.AddArc(arc, 0, 90);
//Draw the bottom left arc
arc.X = bounds.Left;
path.AddArc(arc, 90, 90);
//Close the figure
path.CloseFigure();
//Return the path
return path;
}//Load an existing PDF document
PdfLoadedDocument loadedDocument = new PdfLoadedDocument("Input.pdf");
//Get the page from loaded PDF document
PdfLoadedPage loadedPage = loadedDocument.Pages[0] as PdfLoadedPage;
//Create a new pdf rubber stamp annotation
RectangleF rectangleF = new RectangleF(350, 20, 200, 80);
PdfRubberStampAnnotation rubberStampAnnotation = new PdfRubberStampAnnotation(rectangleF);
//Custom stamp the rubber stamp annotation
PdfSolidBrush brush = new PdfSolidBrush(new PdfColor(Color.LightBlue));
PdfPath path = RoundedRect(new RectangleF(0, 0, 200, 80), 20);
rubberStampAnnotation.Appearance.Normal.Graphics.DrawPath(brush, path);
//Add text in rubber stamp annotation
PdfFont font = new PdfStandardFont(PdfFontFamily.Helvetica, 12, PdfFontStyle.Bold);
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString("DD/2018/1234567890", font, PdfBrushes.Black, new PointF(10, 20));
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString(DateTime.Now.ToString("dd-MM-yyyy HH:mm:ss"), font, PdfBrushes.Black, new PointF(10, 40));
//Set the content of annotation
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation";
//Add annotation to the page
loadedPage.Annotations.Add(rubberStampAnnotation);
//Save the PDF document
loadedDocument.Save("Output.pdf");
//Close the instance of PdfLoadedDocument
loadedDocument.Close(true);
public static PdfPath RoundedRect(RectangleF bounds, int radius)
{
int diameter = radius * 2;
SizeF size = new SizeF(diameter, diameter);
RectangleF arc = new RectangleF(bounds.Location, size);
PdfPath path = new PdfPath();
if (radius == 0)
{
path.AddRectangle(bounds);
return path;
}
//Draw the top left arc
path.AddArc(arc, 180, 90);
//Draw the top right arc
arc.X = bounds.Right - diameter;
path.AddArc(arc, 270, 90);
//Draw the bottom right arc
arc.Y = bounds.Bottom - diameter;
path.AddArc(arc, 0, 90);
//Draw the bottom left arc
arc.X = bounds.Left;
path.AddArc(arc, 90, 90);
//Close the figure
path.CloseFigure();
//Return the path
return path;
}'Load an existing PDF document
Dim loadedDocument As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the page from loaded PDF document
Dim loadedPage As PdfLoadedPage = CType(loadedDocument.Pages(0), PdfLoadedPage)
'Create a new pdf rubber stamp annotation
Dim rectangleF As RectangleF = New RectangleF(350, 20, 200, 80)
Dim rubberStampAnnotation As PdfRubberStampAnnotation = New PdfRubberStampAnnotation(rectangleF)
'Custom stamp the rubber stamp annotation
Dim brush As PdfSolidBrush = New PdfSolidBrush(New PdfColor(Color.LightBlue))
Dim path As PdfPath = RoundedRect(New RectangleF(0, 0, 200, 80), 20)
rubberStampAnnotation.Appearance.Normal.Graphics.DrawPath(brush, path)
'Add text in rubber stamp annotation
Dim font As PdfFont = New PdfStandardFont(PdfFontFamily.Helvetica, 12, PdfFontStyle.Bold)
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString("DD/2018/1234567890", font, PdfBrushes.Black, New PointF(10, 20))
rubberStampAnnotation.Appearance.Normal.Graphics.DrawString(DateTime.Now.ToString("dd-MM-yyyy HH:mm:ss"), font, PdfBrushes.Black, New PointF(10, 40))
'Set the content of annotation
rubberStampAnnotation.Text = "Text Properties Rubber Stamp Annotation"
'Adds annotation to the page
loadedPage.Annotations.Add(rubberStampAnnotation)
'Save the PDF document
loadedDocument.Save("Output.pdf")
'Close the instance of PdfLoadedDocument
loadedDocument.Close(True)
Private Function RoundedRect(bounds As RectangleF, radius As Integer) As PdfPath
Dim diameter As Integer = (radius * 2)
Dim size As SizeF = New SizeF(diameter, diameter)
Dim arc As RectangleF = New RectangleF(bounds.Location, size)
Dim path As PdfPath = New PdfPath
If (radius = 0) Then
path.AddRectangle(bounds)
Return path
End If
'Draw the top left arc
path.AddArc(arc, 180, 90)
'Draw the top right arc
arc.X = (bounds.Right - diameter)
path.AddArc(arc, 270, 90)
'Draw the bottom right arc
arc.Y = (bounds.Bottom - diameter)
path.AddArc(arc, 0, 90)
'Draw the bottom left arc
arc.X = bounds.Left
path.AddArc(arc, 90, 90)
'Close the figure
path.CloseFigure()
'Return the path
Return path
End FunctionYou can download a complete working sample from GitHub.
Get images from custom rubber stamp annotation
You can get the images from the custom rubber stamp annotation appearance using the PdfLoadedRubberStampAnnotation class. The following code explains this.
//Load the existing PDF file.
FileStream fileStream = new FileStream("input.pdf", FileMode.Open);
PdfLoadedDocument ldoc = new PdfLoadedDocument(fileStream);
//Get the existing PDF page.
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the rubber stamp annotation.
PdfLoadedRubberStampAnnotation rubberStampAnnotation = lpage.Annotations[0] as PdfLoadedRubberStampAnnotation;
//Get the custom image streams.
Stream[] imageStreams = rubberStampAnnotation.GetImages();
//Close the PDF document.
ldoc.Close(true);//Load the existing PDF document.
PdfLoadedDocument ldoc = new PdfLoadedDocument("input.pdf");
//Get the existing PDF page.
PdfLoadedPage lpage = ldoc.Pages[0] as PdfLoadedPage;
//Get the existing rubber stamp annotation.
PdfLoadedRubberStampAnnotation rubberStampAnnotation = lpage.Annotations[0] as PdfLoadedRubberStampAnnotation;
//Get the custom images used for the rubber stamp annotation.
Image[] images = rubberStampAnnotation.GetImages();
//Close the PDF document.
ldoc.Close(true);' Load an existing document.
Dim ldoc As PdfLoadedDocument = New PdfLoadedDocument("Input.pdf")
'Get the existing PDF page.
Dim lpage As PdfLoadedPage = CType(ldoc.Pages(0), PdfLoadedPage)
'Get the existing rubber stamp annotation.
Dim rubberStampAnnotation As PdfLoadedRubberStampAnnotation = CType(lpage.Annotations(0), PdfLoadedRubberStampAnnotation)
'Get the custom images used for the rubber stamp annotation.
Dim images As Image() = rubberStampAnnotation.GetImages()
'Close the PDF document.
ldoc.Close(True)Troubleshooting
| Reason | Due to the absence of the appearance dictionary, Annotation may sometimes disappear in adobe reader and other pdf viewer. |
|---|---|
| Solution | By enabling the appearance [Graphical representation] for the annotation by using the "SetAppearance" method as below, PDF Annotations will be preserved properly on saving the file.
|