public class PopupControlContainer : Panel, IPopupControlContainer, IPopupChild, INeedKeyboardMessages, INeedMouseMoveMessages, IMouseHookHLProcClient, IKeyboardProcHookClient, IPopupParent, IPopupItem

Remarks

To design a custom popup, drag-and-drop it off the toolbox into a form during design-time. Then populate it with appropriate controls just like you would any other panel. You can mark it as invisible (Visible = false) so that it will not interfere with the form's layout mechanism. It's also recommended that you unparent it from the design-time parent in your form constructor code, as shown in the sample code below.

When you are ready to popup, call this class's ShowPopup(Point) method. This will show the popup at the specified location.

There are different configurations in which you can use this PopupControlContainer.

When you specify a Parent Control using ParentControl and pass a Point.Empty location to ShowPopup(Point), the popup location will be dynamically determined based on the ParentControl's bounds and the screen area.

When the popup is showing, the PopupControlContainer, in the ProcessDialogKey override will look for Alt, Enter, Tab, Esc, F4, and F2 keys and either cancel or close the popup. If you want to prevent this, then set IgnoreDialogKey to False. You should then make sure to close the popup manually whenever appropriate using HidePopup(PopupCloseType).

The PopupControlContainer also fires the BeforePopup, Popup(after popup) and CloseUp events that you can handle. You could for example set the focus on a control within the PopupControlContainer in the popup event handler.

Examples

The following example has a PopupControlContainer that gets shown when the user does an Alt+DownArrow on a text box.

		public Form1()
		{
			InitializeComponent();
			// It's recommended that you keep the PopupControlContainer unparented by
			// any control on the form (which will be the default case as set up during design-time).
			// Otherwise, the Form won't close sometimes after dropping down this popup!
			this.popupControlContainer1.Parent.Controls.Remove(this.popupControlContainer1);
		}
        #region Windows Form Designer generated code
        private void InitializeComponent()
        {
            System.Resources.ResourceManager resources = new System.Resources.ResourceManager(typeof(Form1));
            this.popupControlContainer1 = new Syncfusion.Windows.Forms.PopupControlContainer();
            this.cancel = new System.Windows.Forms.Button();
            this.OK = new System.Windows.Forms.Button();
            this.popupTextBox = new System.Windows.Forms.TextBox();
            this.label1 = new System.Windows.Forms.Label();
            this.sourceTextBox = new System.Windows.Forms.TextBox();
            this.groupBox1 = new System.Windows.Forms.GroupBox();
            this.dropDownBtn = new System.Windows.Forms.Button();
            this.mainMenu1 = new System.Windows.Forms.MainMenu();
            this.menuItem1 = new System.Windows.Forms.MenuItem();
            this.menuItem2 = new System.Windows.Forms.MenuItem();
            this.popupControlContainer1.SuspendLayout();
            this.groupBox1.SuspendLayout();
            this.SuspendLayout();
            //
            // popupControlContainer1
            //
            this.popupControlContainer1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
            this.popupControlContainer1.Controls.AddRange(new System.Windows.Forms.Control[] {
                                                                                                 this.cancel,
                                                                                                 this.OK,
                                                                                                 this.popupTextBox});
            this.popupControlContainer1.Location = new System.Drawing.Point(80, 128);
            this.popupControlContainer1.Name = "popupControlContainer1";
            this.popupControlContainer1.Size = new System.Drawing.Size(120, 128);
            this.popupControlContainer1.TabIndex = 0;
            this.popupControlContainer1.Visible = false;
            this.popupControlContainer1.Popup += new System.EventHandler(this.popupControlContainer1_Popup);
            this.popupControlContainer1.CloseUp += new Syncfusion.Windows.Forms.PopupClosedEventHandler(this.popupControlContainer1_CloseUp);
            this.popupControlContainer1.BeforePopup += new System.ComponentModel.CancelEventHandler(this.popupControlContainer1_BeforePopup);
            //
            // cancel
            //
            this.cancel.Anchor = (((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom)
                | System.Windows.Forms.AnchorStyles.Left)
                | System.Windows.Forms.AnchorStyles.Right);
            this.cancel.Location = new System.Drawing.Point(64, 96);
            this.cancel.Name = "cancel";
            this.cancel.Size = new System.Drawing.Size(48, 24);
            this.cancel.TabIndex = 2;
            this.cancel.Text = "Cancel";
            this.cancel.Click += new System.EventHandler(this.cancelButton_Click);
            //
            // OK
            //
            this.OK.Anchor = (((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom)
                | System.Windows.Forms.AnchorStyles.Left)
                | System.Windows.Forms.AnchorStyles.Right);
            this.OK.Location = new System.Drawing.Point(8, 96);
            this.OK.Name = "OK";
            this.OK.Size = new System.Drawing.Size(48, 24);
            this.OK.TabIndex = 1;
            this.OK.Text = "OK";
            this.OK.Click += new System.EventHandler(this.OK_Click);
            //
            // popupTextBox
            //
            this.popupTextBox.Multiline = true;
            this.popupTextBox.Name = "popupTextBox";
            this.popupTextBox.Size = new System.Drawing.Size(118, 90);
            this.popupTextBox.TabIndex = 0;
            this.popupTextBox.Text = "";
            //
            // label1
            //
            this.label1.Font = new System.Drawing.Font("Microsoft Sans Serif", 10F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0)));
            this.label1.Location = new System.Drawing.Point(16, 56);
            this.label1.Name = "label1";
            this.label1.Size = new System.Drawing.Size(256, 64);
            this.label1.TabIndex = 1;
            this.label1.Text = "Associate a PopupControlContainer with this TextBox. And also transfer data back " +
                "and forth between the popup and the TextBox.";
            //
            // sourceTextBox
            //
            this.sourceTextBox.Location = new System.Drawing.Point(40, 128);
            this.sourceTextBox.Name = "sourceTextBox";
            this.sourceTextBox.Size = new System.Drawing.Size(200, 20);
            this.sourceTextBox.TabIndex = 2;
            this.sourceTextBox.Text = "Alt+DownArrow for popup";
            this.sourceTextBox.KeyDown += new System.Windows.Forms.KeyEventHandler(this.textBoxPopupParent_KeyDown);
            //
            // groupBox1
            //
            this.groupBox1.Controls.AddRange(new System.Windows.Forms.Control[] {
                                                                                    this.dropDownBtn});
            this.groupBox1.Location = new System.Drawing.Point(8, 32);
            this.groupBox1.Name = "groupBox1";
            this.groupBox1.Size = new System.Drawing.Size(280, 128);
            this.groupBox1.TabIndex = 3;
            this.groupBox1.TabStop = false;
            this.groupBox1.Text = "PopupControlContainer demo";
            //
            // dropDownBtn
            //
            this.dropDownBtn.Image = ((System.Drawing.Bitmap)(resources.GetObject("dropDownBtn.Image")));
            this.dropDownBtn.Location = new System.Drawing.Point(240, 96);
            this.dropDownBtn.Name = "dropDownBtn";
            this.dropDownBtn.Size = new System.Drawing.Size(26, 20);
            this.dropDownBtn.TabIndex = 0;
            this.dropDownBtn.Click += new System.EventHandler(this.dropDownBtn_Click);
            //
            // mainMenu1
            //
            this.mainMenu1.MenuItems.AddRange(new System.Windows.Forms.MenuItem[] {
                                                                                      this.menuItem1});
            //
            // menuItem1
            //
            this.menuItem1.Index = 0;
            this.menuItem1.MenuItems.AddRange(new System.Windows.Forms.MenuItem[] {
                                                                                      this.menuItem2});
            this.menuItem1.Text = "Help";
            //
            // menuItem2
            //
            this.menuItem2.Index = 0;
            this.menuItem2.Text = "About Syncfusion";
            this.menuItem2.Click += new System.EventHandler(this.menuItem2_Click);
            //
            // Form1
            //
            this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
            this.ClientSize = new System.Drawing.Size(292, 273);
            this.Controls.AddRange(new System.Windows.Forms.Control[] {
                                                                          this.sourceTextBox,
                                                                          this.label1,
                                                                          this.popupControlContainer1,
                                                                          this.groupBox1});
            this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
            this.Menu = this.mainMenu1;
            this.Name = "Form1";
            this.Text = "Custom Popups Dialog";
            this.popupControlContainer1.ResumeLayout(false);
            this.groupBox1.ResumeLayout(false);
            this.ResumeLayout(false);

        }
        #endregion

        [STAThread]
        public static void Main()
        {
            Application.Run(new Form1());
        }

        #region OpenClosePopup
        private void textBoxPopupParent_KeyDown(object sender, System.Windows.Forms.KeyEventArgs e)
        {
            // Using this unconventional if statement syntax to avoid "and" symbol (documentation restriction, please ignore).

            // If user pressed key down, then show the popup.
            if(e.Alt)
                if(e.KeyCode == Keys.Down)
                    if(!this.popupControlContainer1.IsShowing())
                    {
                        // Let the popup align around the source textBox.
                        this.popupControlContainer1.ParentControl = this.sourceTextBox;
                        // Passing Point.Empty will align it automatically around the above ParentControl.
                        this.popupControlContainer1.ShowPopup(Point.Empty);

                        e.Handled = true;
                    }
            // Escape should close the popup.
            if(e.KeyCode == Keys.Escape)
                if(this.popupControlContainer1.IsShowing())
                    this.popupControlContainer1.HidePopup(PopupCloseType.Canceled);
        }

        private void OK_Click(object sender, System.EventArgs e)
        {
            this.popupControlContainer1.HidePopup(PopupCloseType.Done);
        }

        private void cancelButton_Click(object sender, System.EventArgs e)
        {
            this.popupControlContainer1.HidePopup(PopupCloseType.Canceled);
        }
        #endregion OpenClosePopup

        #region PopupEvents
        private void popupControlContainer1_BeforePopup(object sender, System.ComponentModel.CancelEventArgs e)
        {
            // Set the text to be edited with the text in the form text box.
            this.popupTextBox.Text = this.sourceTextBox.Text;
        }

        private void popupControlContainer1_Popup(object sender, System.EventArgs e)
        {
            // Set the focus on the text box inside the popup after it is open.
            this.popupTextBox.Focus();
            this.popupTextBox.SelectionStart = 0;
            this.popupTextBox.SelectionLength = 0;
        }

        private void popupControlContainer1_CloseUp(object sender, Syncfusion.Windows.Forms.PopupClosedEventArgs args)
        {
            // Transfer data from the popup.
            if(args.PopupCloseType == PopupCloseType.Done)
            {
                this.sourceTextBox.Text = this.popupTextBox.Text;
            }
            // Set focus back to textbox.
            if(args.PopupCloseType == PopupCloseType.Done
                || args.PopupCloseType == PopupCloseType.Canceled)
                this.sourceTextBox.Focus();
        }
        #endregion PopupEvents

Constructors

PopupControlContainer()

Creates a new instance of the PopupControlContainer.

Declaration

public PopupControlContainer()

PopupControlContainer(IContainer)

Initializes a new instance of the PopupControlContainer class with a specified container.

Declaration

public PopupControlContainer(IContainer container)

Parameters

Type	Name	Description
System.ComponentModel.IContainer	container	A System.ComponentModel.IContainer that represents the container of the PopupControlContainer.

Remarks

Containers are objects that encapsulate and track zero or more components. In this context, containment refers to logical containment, not visual containment. You can use components and containers in a variety of scenarios, including scenarios that are both visual and not visual.

Note to Implementers: To be a container, the class must implement the IContainer interface, which supports methods for adding, removing and retrieving components.

Unlike other controls, a PopupControlContainer is not a direct child of your form (though this is the case during design-time). This requires you to explicitly dispose of this control before the form gets destroyed. With this constructor override, the PopupControlContainer automatically plugs itself into a form's default component-containment pattern (through the IContainer member) during design-time. If you create this class in code, then you have to set it up manually.

The implementation simply adds the PopupControlContainer instance into the container.

Properties

CloseOnTab

Specifies whether the drop down need to be closed on pressing tab on the last item and shift tab on the first item in the drop down.

Declaration

public bool CloseOnTab { get; set; }

Property Value

Type	Description
System.Boolean

CurrentPopupChild

Gets or sets the current popup child in the popup hierarchy.

Declaration

public IPopupChild CurrentPopupChild { get; set; }

Property Value

Type	Description
IPopupChild	An instance of IPopupChild interface.

Remarks

When you want to show a parent-child hierarchy of popups, call this property on the parent popup before showing the child popup.

Examples

// While the parent PopupControlContainer is showing, you might want to show another child
// PopupControlContainer. You can do so as follows:
// Set up parent-child relationship.
parentPopupControlContainer.CurrentPopupChild = childPopupControlContainer;
childPopupControlContainer.PopupParent = parentPopupControlContainer;

// Now show the child popup.
childPopupControlContainer.ShowPopup();

DefaultMargin

Declaration

protected override Padding DefaultMargin { get; }

Property Value

Type	Description
System.Windows.Forms.Padding

DefaultSize

Declaration

protected override Size DefaultSize { get; }

Property Value

Type	Description
System.Drawing.Size

DesignMode

Indicates whether the control is in design-mode.

Declaration

public bool DesignMode { get; }

Property Value

Type	Description
System.Boolean

DiscreetLocation

Gets or sets the discreet location.

Declaration

public Point DiscreetLocation { get; set; }

Property Value

Type	Description
System.Drawing.Point

EnableTouchMode

gets or sets the touchmode

Declaration

public bool EnableTouchMode { get; set; }

Property Value

Type	Description
System.Boolean

FakeFocus

Indicates whether the popup should send a kill focus message to the control with focus when the popup was shown.

Declaration

public bool FakeFocus { get; set; }

Property Value

Type	Description
System.Boolean	True to send a KillFocus message; False otherwise. Default value is False.

Remarks

Faking focus is only necessary when the PopupControlContainer doesn't take the focus but you want it to look like it took the focus.

When this property is True, a KillFocus message will be sent to the control that currently has the focus after the PopupControlContainer is dropped down and a SetFocus message will be sent to the control with focus when the popup is closed.

Again, you will probably not need this functionality in most of the cases, since you will probably set the focus on some control with this PopupControlContainer as soon as it pops up (from within the popup event handler).

Font

Gets or sets the System.Drawing.Font value for the control.

Declaration

public override Font Font { get; set; }

Property Value

Type	Description
System.Drawing.Font

IgnoreDialogKey

Indicates whether to ignore dialog keys.

Declaration

public bool IgnoreDialogKey { get; set; }

Property Value

Type	Description
System.Boolean	True to ignore dialog keys; False if not to. Default is False.

Remarks

When the popup is showing, the PopupControlContainer in the ProcessDialogKey override will look for Alt, Enter, Tab, Esc, F4, and F2 keys and either cancel or close the popup. If you want to prevent this, set IgnoreDialogKey = False. You should then listen for the above keys and make sure to close the popup manually whenever appropriate using HidePopup.

IgnoreKeys

Indicates whether to ignore all keys.

Declaration

public bool IgnoreKeys { get; set; }

Property Value

Type	Description
System.Boolean	True to ignore all keys; False otherwise. Default is False.

Remarks

When the popup is showing, it will "swallow" all the WM_KEYDOWN and WM_CHAR messages. To prevent it, set this property to True.

IgnoreMouseMessages

Indicates whether to ignore all mouse messages.

Declaration

public bool IgnoreMouseMessages { get; set; }

Property Value

Type	Description
System.Boolean	True to ignore all mouse messages; False otherwise. Default is False.

Remarks

When the popup is showing it will "swallow" all the mouse messages that are sent to controls not in the popup-hierarchy. When showing, the popup will also listen to mouse messages to determine if the popup should be closed (for mouse down outside the popup-hierarchy, for example).

To prevent this behavior, set this property to True.

When set to True, the popup will close only when you call the HidePopup(PopupCloseType) method or when a new popup gets shown.

ParentControl

Specifies the PopupControlContainer's control parent.

Declaration

public Control ParentControl { get; set; }

Property Value

Type	Description
System.Windows.Forms.Control	A control instance.

Remarks

The Parent-Child relationship in this case is NOT similar to the one in the control hierarchy.

When you specify a Parent Control via ParentControl and pass a Point.Empty location to ShowPopup, the popup location will be dynamically determined based on the ParentControl bounds and the screen area.

PopupHost

Gets or sets a reference to the PopupHost that will be used to host this PopupControlContainer when dropped down.

Declaration

public PopupHost PopupHost { get; set; }

Property Value

Type	Description
PopupHost	The PopupHost object that will host this PopupControlContainer.

Remarks

PopupHost is the top level form-based control that hosts this PopupControlContainer when dropped down.

The PopupControlContainer usually creates a custom PopupHost when it is asked to drop down. However, you can provide your own PopupHost if you have a customized version.

You can also get a reference to the PopupHost that the PopupControlContainer uses by default and make changes to it. The PopupControlContainer creates a default PopupHost when there is no PopupHost supplied to it, but ShowPopup(Point) gets called to show the popup. Hence, the best place to get the default PopupHost associated with this PopupControlContainer is in the BeforePopup handler. Or call EnsurePopupHost() to create the default PopupHost if it is not yet created.

Examples

The following example shows how to make the PopupHost's border style resizable to create a resizable popup.

        // The PopupControlContainer's BeforePopup event handler
        private void popupControlContainer1_BeforePopup(object sender, System.ComponentModel.CancelEventArgs e)
        {
            // Create a Popup, that can be resized.
        // Make the popup host&apos;s border style resizable.
        this.popupControlContainer1.PopupHost.FormBorderStyle = FormBorderStyle.SizableToolWindow;
        this.popupControlContainer1.PopupHost.BackColor = this.BackColor;

        // Necessary to set the host&apos;s client size every time, especially since the
        // popup&apos;s Dock style is set to DockStyle.Fill.
        if(!(this.popupControlContainer1.PopupHost.Size.Width >= 140))
            this.popupControlContainer1.PopupHost.Size = new System.Drawing.Size(140, 150);

        // So that the popup container will fill the entire popup host when resized.
        this.popupControlContainer1.Dock = DockStyle.Fill;
    }</code></pre>

PopupParent

Specifies the IPopupParent parent.

Declaration

public IPopupParent PopupParent { get; set; }

Property Value

Type	Description
IPopupParent	An instance that implements IPopupParent.

Remarks

When you associate an IPopupParent interface with the PopupControlContainer you get even more control over the alignment and positioning of the Popup, (this you would do instead of the PopupControl based parenting).

When you provide this interface, the alignment and positioning logic is delegated to this interface.

Methods

ApplyScaleToControl(Single)

applies the scaling

Declaration

public void ApplyScaleToControl(float scaleFactor)

Parameters

Type	Name	Description
System.Single	scaleFactor

ChildClosing(IPopupChild, PopupCloseType)

Declaration

protected virtual void ChildClosing(IPopupChild childUI, PopupCloseType popupCloseType)

Parameters

Type	Name	Description
IPopupChild	childUI
PopupCloseType	popupCloseType

ConfirmDeactivate()

This method is called from the BarManager class when the parent form is deactivated. It checks whether the user clicked inside a child control of this PopupControlContainer. If this is not the case (e.g. user clicked on another window on the desktop) then the popup gets hidden.

Declaration

public virtual void ConfirmDeactivate()

CreateAccessibilityInstance()

Declaration

protected override AccessibleObject CreateAccessibilityInstance()

Returns

Type	Description
System.Windows.Forms.AccessibleObject

CreatePopupHost()

Declaration

protected virtual PopupHost CreatePopupHost()

Returns

Type	Description
PopupHost

Dispose(Boolean)

Declaration

protected override void Dispose(bool disposing)

Parameters

Type	Name	Description
System.Boolean	disposing

EnsurePopupHost()

Ensures that the PopupHost property returns a valid PopupHost.

Declaration

public void EnsurePopupHost()

Remarks

Normally the PopupHost property will return a non-NULL value only when the popup was displayed at least once. Calling this method will ensure that the property returns a non-NULL value.

FocusFirstVisibleParent()

Focuses first visible parent.

Declaration

public virtual void FocusFirstVisibleParent()

FocusParent()

Sets focus on the popup parent control.

Declaration

public virtual void FocusParent()

GetBorderOverlapCue(PopupRelativeAlignment)

Declaration

protected virtual Point[] GetBorderOverlapCue(PopupRelativeAlignment relativeAlignment)

Parameters

Type	Name	Description
PopupRelativeAlignment	relativeAlignment

Returns

Type	Description
System.Drawing.Point[]

GetLocationForPopupAlignment(PopupRelativeAlignment, out PopupRelativeAlignment)

Declaration

protected virtual Point GetLocationForPopupAlignment(PopupRelativeAlignment prevAlignment, out PopupRelativeAlignment newAlignment)

Parameters

Type	Name	Description
PopupRelativeAlignment	prevAlignment
PopupRelativeAlignment	newAlignment

Returns

Type	Description
System.Drawing.Point

GetPreferredLocation(PopupRelativeAlignment, out PopupRelativeAlignment)

Gets preferred location.

Declaration

public virtual Point GetPreferredLocation(PopupRelativeAlignment prevAlignment, out PopupRelativeAlignment newAlignment)

Parameters

Type	Name	Description
PopupRelativeAlignment	prevAlignment
PopupRelativeAlignment	newAlignment

Returns

Type	Description
System.Drawing.Point

HidePopup()

Hides a popup that is open.

Declaration

public virtual void HidePopup()

Remarks

This method will hide the popup with the Canceled mode.

HidePopup(PopupCloseType)

Hides a popup with the specified PopupCloseType mode.

Declaration

public virtual void HidePopup(PopupCloseType popupCloseType)

Parameters

Type	Name	Description
PopupCloseType	popupCloseType	A PopupCloseType value.

IsInSetFocus()

Specifies whether the control is in set focus.

Declaration

public bool IsInSetFocus()

Returns

Type	Description
System.Boolean

IsRelatedControl(Control, Boolean)

Checks whether the control is a related control.

Declaration

public virtual bool IsRelatedControl(Control control, bool askPopupParent)

Parameters

Type	Name	Description
System.Windows.Forms.Control	control
System.Boolean	askPopupParent

Returns

Type	Description
System.Boolean

IsShowing()

Indicates whether the popup is currently dropped down.

Declaration

public bool IsShowing()

Returns

Type	Description
System.Boolean	True indicates popup is dropped down; False otherwise.

OnBeforePopup(CancelEventArgs)

Raises the BeforePopup event.

Declaration

protected virtual void OnBeforePopup(CancelEventArgs args)

Parameters

Type	Name	Description
System.ComponentModel.CancelEventArgs	args	A CancelEventArgs that contains the event data.

Remarks

The OnBeforePopup method also allows derived classes to handle the event without attaching a delegate. This is the preferred technique for handling the event in a derived class.

Note to Inheritors: When overriding OnBeforePopup in a derived class, be sure to call the base class's OnBeforePopup method so that registered delegates receive the event.

OnCloseUp(PopupClosedEventArgs)

Raises the CloseUp event.

Declaration

protected virtual void OnCloseUp(PopupClosedEventArgs args)

Parameters

Type	Name	Description
PopupClosedEventArgs	args	A PopupClosedEventArgs instance containing data pertaining to this event.

Remarks

The OnCloseUp method also allows derived classes to handle the event without attaching a delegate. This is the preferred technique for handling the event in a derived class.

Note to Inheritors: When overriding OnCloseUp in a derived class, be sure to call the base class's OnCloseUp method so that registered delegates receive the event.

OnFontChanged(EventArgs)

font changed

Declaration

protected override void OnFontChanged(EventArgs e)

Parameters

Type	Name	Description
System.EventArgs	e

OnPopup(EventArgs)

Raises the Popup event.

Declaration

protected virtual void OnPopup(EventArgs args)

Parameters

Type	Name	Description
System.EventArgs	args	An EventArgs instance containing data pertaining to this event.

Remarks

The OnPopup method also allows derived classes to handle the event without attaching a delegate. This is the preferred technique for handling the event in a derived class.

Note to Inheritors: When overriding OnPopup in a derived class, be sure to call the base class's OnPopup method so that registered delegates receive the event.

OnSizeChanged(EventArgs)

Declaration

protected override void OnSizeChanged(EventArgs e)

Parameters

Type	Name	Description
System.EventArgs	e

ProcessDialogKey(Keys)

Overridden. See System.Windows.Forms.Control.ProcessDialogKey.

Declaration

protected override bool ProcessDialogKey(Keys key)

Parameters

Type	Name	Description
System.Windows.Forms.Keys	key

Returns

Type	Description
System.Boolean

ProcessMouseMessage(Control, Int32, IntPtr, IntPtr)

Declaration

protected virtual bool ProcessMouseMessage(Control destination, int msg, IntPtr lParam, IntPtr wParam)

Parameters

Type	Name	Description
System.Windows.Forms.Control	destination
System.Int32	msg
System.IntPtr	lParam
System.IntPtr	wParam

Returns

Type	Description
System.Boolean

ShowPopup(Point)

Declaration

public virtual void ShowPopup(Point location)

Parameters

Type	Name	Description
System.Drawing.Point	location

VeryifyMouseBasedDeactivation(Control, Int32)

Declaration

protected virtual void VeryifyMouseBasedDeactivation(Control destinationControl, int msg)

Parameters

Type	Name	Description
System.Windows.Forms.Control	destinationControl
System.Int32	msg

WndProc(ref Message)

Overridden. System.Windows.Forms.Control.WndProc.

Declaration

protected override void WndProc(ref Message m)

Parameters

Type	Name	Description
System.Windows.Forms.Message	m

Events

BeforeCloseUp

Occurs before a popup is closed.

Declaration

public event CancelEventHandler BeforeCloseUp

Event Type

Type	Description
System.ComponentModel.CancelEventHandler

BeforePopup

Occurs when the popup is about to be shown.

Declaration

public event CancelEventHandler BeforePopup

Event Type

Type	Description
System.ComponentModel.CancelEventHandler

Remarks

You may choose to cancel drop-down in this handler. This is also a good place, for example, to access the PopupControlContainer's PopupHost and make changes to it.

CloseUp

Occurs when a popup is closed.

Declaration

public event PopupClosedEventHandler CloseUp

Event Type

Type	Description
PopupClosedEventHandler

Remarks

Handling this event will tell you whether the popup was closed or canceled by the user. This, in some cases, will then let you know whether or not you should accept changes in the popup.

Popup

Occurs after the popup has been dropped down and made visible.

Declaration

public event EventHandler Popup

Event Type

Type	Description
System.EventHandler

Remarks

This is a good place, for example, to set the focus on a control in the popup.

Explicit Interface Implementations

IKeyboardProcHookClient.KeyboardHookProc(Int32, Int32)

Declaration

bool IKeyboardProcHookClient.KeyboardHookProc(int wParam, int lParam)

Parameters

Type	Name	Description
System.Int32	wParam
System.Int32	lParam

Returns

Type	Description
System.Boolean

IMouseHookHLProcClient.MouseHookProc(Int32, Point, IntPtr, Int32, Int32)

Declaration

bool IMouseHookHLProcClient.MouseHookProc(int msg, Point point, IntPtr hwnd, int wHitTestCode, int dwExtraInfo)

Parameters

Type	Name	Description
System.Int32	msg
System.Drawing.Point	point
System.IntPtr	hwnd
System.Int32	wHitTestCode
System.Int32	dwExtraInfo

Returns

Type	Description
System.Boolean

INeedKeyboardMessages.KeyboardMessage(ref Message)

Declaration

bool INeedKeyboardMessages.KeyboardMessage(ref Message m)

Parameters

Type	Name	Description
System.Windows.Forms.Message	m

Returns

Type	Description
System.Boolean

INeedMouseMoveMessages.MouseMessage(ref Message)

Declaration

bool INeedMouseMoveMessages.MouseMessage(ref Message m)

Parameters

Type	Name	Description
System.Windows.Forms.Message	m

Returns

Type	Description
System.Boolean

IPopupItem.GetPopupParentControl()

Declaration

Control IPopupItem.GetPopupParentControl()

Returns

Type	Description
System.Windows.Forms.Control

IPopupParent.ChildClosing(IPopupChild, PopupCloseType)

Declaration

void IPopupParent.ChildClosing(IPopupChild childUI, PopupCloseType popupCloseType)

Parameters

Type	Name	Description
IPopupChild	childUI
PopupCloseType	popupCloseType

IPopupParent.GetBorderOverlapCue(PopupRelativeAlignment)

Declaration

Point[] IPopupParent.GetBorderOverlapCue(PopupRelativeAlignment relativeAlignment)

Parameters

Type	Name	Description
PopupRelativeAlignment	relativeAlignment

Returns

Type	Description
System.Drawing.Point[]

IPopupParent.GetLocationForPopupAlignment(PopupRelativeAlignment, out PopupRelativeAlignment)

Declaration

Point IPopupParent.GetLocationForPopupAlignment(PopupRelativeAlignment prevAlignment, out PopupRelativeAlignment newAlignment)

Parameters

Type	Name	Description
PopupRelativeAlignment	prevAlignment
PopupRelativeAlignment	newAlignment

Returns

Type	Description
System.Drawing.Point

IPopupParent.IsRightToLeft

Declaration

bool IPopupParent.IsRightToLeft { get; }

Returns

Type	Description
System.Boolean

Implements

IPopupControlContainer

IPopupChild

INeedKeyboardMessages

INeedMouseMoveMessages

IMouseHookHLProcClient

IKeyboardProcHookClient

IPopupParent

IPopupItem