Class FOPTEShadowStyle
The interpretation of the transform properties depends on the type of shadow: msoshadowOffset, msoshadowDouble: Only the offset is used. It is interpreted as an absolute offset expressed in EMUs. The default corresponds to 1/36" in both X and Y (2 or 3 pixels on screen depending on monitor resolution). The offset is relative to the drawing axes (as msoshadowDrawing below, not msoshadowRich) so a shadow offset to the bottom right of the drawing is still offset (by the same amount) to the bottom right if the shape is rotated. The "double" case causes two shadows to be drawn, the first (lower) at the second offset and in the shadowHighlightColor. If the second offset is 0,0 it defaults to being the inverse of the first. msoshadowRich: The offsets and transformation properties are in absolute units measured relative to the shape on the drawing - the shadow moves with the shape, but anisotropic scaling of the shape changes the proportions of the shadow, not its angles. Compare with the following where such scaling scales the shadow in proportion too, thus changes the angle between (e.g.) a vertical line in the shape and it's shadow. msoshadowShape: The offsets and transformation properties are relative to the shape; 1.0 corresponds to the shape width/height as appropriate. The shadow is cast relative to the shape then scaled with the shape, so it moves with the shape. The units are simple numbers (ratios of the G unit space effectively). This transformation type is unnatural in real world terms, but behaves nicely in geometric terms. The offset elements of the property set are treated as fixed-point 16.16 values. msoshadowDrawing: A rich shadow cast onto a plane in drawing space. The transform is applied to the drawing coordinates of the shape and is thus expressed in EMUs. This shadow type enables creation of shadows from multiple objects, however the shadows may overlap higher (different) objects if the shadow plane and shape drawing planes overlap on the screen. The shadowWeight parameter is used as in the perspective property set to apply addiitonal scaling to the perspective parameters - these are divided by the weight. Shadow transformations are independent of the perspective transformation applied to a shape - either hte perspective transformation or the shadow transformation is used as appropriate.
Inheritance
Namespace: Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher
Assembly: Syncfusion.DocIO.UWP.dll
Syntax
public sealed class FOPTEShadowStyle : EnumFields
fShadow
The f shadow
Declaration
public const FOPTEShadowStyle fShadowField Value
| Type |
|---|
| FOPTEShadowStyle |
fshadowObscured
The fshadow obscured
Declaration
public const FOPTEShadowStyle fshadowObscuredField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowColor
The shadow color
Declaration
public const FOPTEShadowStyle shadowColorField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowCrMod
The shadow cr mod
Declaration
public const FOPTEShadowStyle shadowCrModField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowHighlight
The shadow highlight
Declaration
public const FOPTEShadowStyle shadowHighlightField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowOffsetX
The shadow offset x
Declaration
public const FOPTEShadowStyle shadowOffsetXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowOffsetY
The shadow offset y
Declaration
public const FOPTEShadowStyle shadowOffsetYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowOpacity
The shadow opacity
Declaration
public const FOPTEShadowStyle shadowOpacityField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowOriginX
The shadow origin x
Declaration
public const FOPTEShadowStyle shadowOriginXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowOriginY
The shadow origin y
Declaration
public const FOPTEShadowStyle shadowOriginYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowPerspectiveX
The shadow perspective x
Declaration
public const FOPTEShadowStyle shadowPerspectiveXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowPerspectiveY
The shadow perspective y
Declaration
public const FOPTEShadowStyle shadowPerspectiveYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowScaleXToX
The shadow scale x to x
Declaration
public const FOPTEShadowStyle shadowScaleXToXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowScaleXToY
The shadow scale x to y
Declaration
public const FOPTEShadowStyle shadowScaleXToYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowScaleYToX
The shadow scale y to x
Declaration
public const FOPTEShadowStyle shadowScaleYToXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowScaleYToY
The shadow scale y to y
Declaration
public const FOPTEShadowStyle shadowScaleYToYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowSecondOffsetX
The shadow second offset x
Declaration
public const FOPTEShadowStyle shadowSecondOffsetXField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowSecondOffsetY
The shadow second offset y
Declaration
public const FOPTEShadowStyle shadowSecondOffsetYField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowType
The shadow type
Declaration
public const FOPTEShadowStyle shadowTypeField Value
| Type |
|---|
| FOPTEShadowStyle |
shadowWeight
The shadow weight
Declaration
public const FOPTEShadowStyle shadowWeightField Value
| Type |
|---|
| FOPTEShadowStyle |