Radial Range in the .NET MAUI Radial Gauge
13 Dec 202124 minutes to read
Radial range is a visual element that helps to quickly visualize where a value falls on the axis.
Setting start and end value
The start and end values of range is set by StartValue and EndValue properties.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis >
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65" />
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange radialRange = new RadialRange();
radialRange.StartValue = 30;
radialRange.EndValue = 65;
radialAxis.Ranges.Add(radialRange);
this.Content = sfRadialGauge;
NOTE
In a 360 degree radial axis, you can maintain the range in reverse order by giving minimum value to EndValue and maximum value to StartValue. These values will be swapped if there is no 360 degree radial axis.
<gauge:SfRadialGauge x:Name="gauge">
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis x:Name="radialAxis"
StartAngle="270"
EndAngle="270"
Minimum="0"
Maximum="24"
Interval="6"
MinorTicksPerInterval="5"
ShowFirstLabel="False">
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="12" EndValue="6"/>
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
radialAxis.StartAngle = 270;
radialAxis.EndAngle = 270;
radialAxis.Minimum = 0;
radialAxis.Maximum = 24;
radialAxis.Interval = 6;
radialAxis.MinorTicksPerInterval = 5;
radialAxis.ShowFirstLabel = false;
sfRadialGauge.Axes.Add(radialAxis);
RadialRange radialRange = new RadialRange();
radialRange.StartValue = 12;
radialRange.EndValue = 6;
radialAxis.Ranges.Add(radialRange);
this.Content = sfRadialGauge;
Range customization
The following properties are used for the range customization:
-
Fill– Specifies the color for the range. -
StartWidth– Specifies the start width of the range either in pixels or factor. -
EndWidth– Specifies the end width of the range either in pixels or factor. -
WidthUnit– Specifies whether the start width and end width of the range are set in pixels or factor. -
GradientStops- Specifies the gradient for the range.
Equal range width
Range width can be controlled by StartWidth and EndWidth properties of the range.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65"
StartWidth="10"
EndWidth="10" />
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange = new RadialRange();
gaugeRange.StartValue = 30;
gaugeRange.EndValue = 65;
gaugeRange.StartWidth = 10;
gaugeRange.EndWidth = 10;
radialAxis.Ranges.Add(gaugeRange);
this.Content = sfRadialGauge;
Different range width
By setting different values to StartWidth and EndWidth property, you can create different width ranges.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65"
StartWidth="5"
EndWidth="20" />
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange = new RadialRange();
gaugeRange.StartValue = 30;
gaugeRange.EndValue = 65;
gaugeRange.StartWidth = 5;
gaugeRange.EndWidth = 20;
radialAxis.Ranges.Add(gaugeRange);
this.Content = sfRadialGauge;
When the WidthUnit is set as pixels, the range will be rendered based on the provided pixel values in StartWidth and EndWidth
If the WidthUnit is set as factor, the provided factor value in the start width and end width will be multiplied with the axis radius, respectively and calculated values assigned to the range width. The factor value ranges from 0 to 1.
Setting gradient brush to the range
The GradientStops property of range allows you to specify the smooth color transition to the pointer by specifying the different colors based on provided axis value.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65"
StartWidth="5"
EndWidth="20">
<gauge:RadialRange.GradientStops>
<gauge:GaugeGradientStop Value="39"
Color="#FFBC4E9C" />
<gauge:GaugeGradientStop Value="56"
Color="#FFF80759" />
</gauge:RadialRange.GradientStops>
</gauge:RadialRange>
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange = new RadialRange();
gaugeRange.StartValue = 30;
gaugeRange.EndValue = 65;
gaugeRange.StartWidth = 5;
gaugeRange.EndWidth = 20;
GaugeGradientStop gaugeGradientStop1 = new GaugeGradientStop();
gaugeGradientStop1.Value = 39;
gaugeGradientStop1.Color = Color.FromRgb(188, 78, 156);
gaugeRange.GradientStops.Add(gaugeGradientStop1);
GaugeGradientStop gaugeGradientStop2 = new GaugeGradientStop();
gaugeGradientStop2.Value = 56;
gaugeGradientStop2.Color = Color.FromRgb(248, 7, 89);
gaugeRange.GradientStops.Add(gaugeGradientStop2);
radialAxis.Ranges.Add(gaugeRange);
this.Content = sfRadialGauge;
Position customization
The range can be moved far or near to the axis line by using the RangeOffset property. The OffsetUnit property of range allows you to specify the RangeOffset either in factor or pixels, and the default value of OffsetUnit is pixel.
Range offset in pixel
If the OffsetUnit is set as a pixels, the range will be moved from axis line based on the provided pixel value.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65"
RangeOffset="70" />
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange = new RadialRange();
gaugeRange.StartValue = 30;
gaugeRange.EndValue = 65;
gaugeRange.RangeOffset = 70;
radialAxis.Ranges.Add(gaugeRange);
this.Content = sfRadialGauge;
Range offset in factor
If the OffsetUnit is set as a factor, the provided factor value in the RangeOffset will be multiplied by the axis radius and the range will be moved from axis line to the corresponding position. The default value of OffsetUnit is Pixel.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="30"
EndValue="65"
RangeOffset="0.4"
OffsetUnit="Factor"/>
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange = new RadialRange();
gaugeRange.StartValue = 30;
gaugeRange.EndValue = 65;
gaugeRange.RangeOffset = 0.4;
gaugeRange.OffsetUnit = SizeUnit.Factor;
radialAxis.Ranges.Add(gaugeRange);
this.Content = sfRadialGauge;
Setting range color to axis elements
You can set range color to axis labels and ticks using the UseRangeColorForAxis property of axis.
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis ShowAxisLine="False"
TickPosition="Outside"
LabelPosition="Outside"
StartAngle="270"
EndAngle="270"
UseRangeColorForAxis="True"
RadiusFactor="0.65"
Interval="10"
ShowFirstLabel="False"
IsInversed="True"
MinorTicksPerInterval="4">
<gauge:RadialAxis.MajorTickStyle>
<gauge:RadialTickStyle LengthUnit="Factor" Length="0.15"/>
</gauge:RadialAxis.MajorTickStyle>
<gauge:RadialAxis.MinorTickStyle>
<gauge:RadialTickStyle LengthUnit="Factor" Length="0.04"/>
</gauge:RadialAxis.MinorTickStyle>
<gauge:RadialAxis.Ranges>
<gauge:RadialRange WidthUnit="Factor"
OffsetUnit="Factor"
RangeOffset="0.1"
StartWidth="0.05"
EndWidth="0.25"
StartValue="0"
EndValue="35"
Fill="#FFF8B195">
</gauge:RadialRange>
<gauge:RadialRange WidthUnit="Factor"
OffsetUnit="Factor"
RangeOffset="0.1"
StartWidth="0.05"
EndWidth="0.25"
StartValue="35"
EndValue="70"
Fill="#FFC06C84">
</gauge:RadialRange>
<gauge:RadialRange WidthUnit="Factor"
OffsetUnit="Factor"
RangeOffset="0.1"
StartWidth="0.05"
EndWidth="0.25"
StartValue="70"
EndValue="100"
Fill="#FF355C7D">
</gauge:RadialRange>
</gauge:RadialAxis.Ranges>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
radialAxis.ShowAxisLine = false;
radialAxis.TickPosition = GaugeElementPosition.Outside;
radialAxis.LabelPosition = GaugeLabelsPosition.Outside;
radialAxis.StartAngle = 270;
radialAxis.EndAngle = 270;
radialAxis.UseRangeColorForAxis = true;
radialAxis.RadiusFactor = 0.65;
radialAxis.Interval = 10;
radialAxis.ShowFirstLabel = false;
radialAxis.IsInversed = true;
radialAxis.MajorTickStyle.LengthUnit = SizeUnit.Factor;
radialAxis.MinorTickStyle.LengthUnit = SizeUnit.Factor;
radialAxis.MajorTickStyle.Length = 0.15;
radialAxis.MinorTickStyle.Length = 0.04;
radialAxis.MinorTicksPerInterval = 4;
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange1 = new RadialRange();
gaugeRange1.WidthUnit = SizeUnit.Factor;
gaugeRange1.OffsetUnit = SizeUnit.Factor;
gaugeRange1.RangeOffset = 0.1;
gaugeRange1.StartWidth = 0.05;
gaugeRange1.EndWidth = 0.25;
gaugeRange1.StartValue = 0;
gaugeRange1.EndValue = 35;
gaugeRange1.Fill = new SolidColorBrush(Color.FromRgb(248, 177, 149));
radialAxis.Ranges.Add(gaugeRange1);
RadialRange gaugeRange2 = new RadialRange();
gaugeRange2.WidthUnit = SizeUnit.Factor;
gaugeRange2.OffsetUnit = SizeUnit.Factor;
gaugeRange2.RangeOffset = 0.1;
gaugeRange2.StartWidth = 0.05;
gaugeRange2.EndWidth = 0.25;
gaugeRange2.StartValue = 35;
gaugeRange2.EndValue = 70;
gaugeRange2.Fill = new SolidColorBrush(Color.FromRgb(192, 108, 132));
radialAxis.Ranges.Add(gaugeRange2);
RadialRange gaugeRange3 = new RadialRange();
gaugeRange3.WidthUnit = SizeUnit.Factor;
gaugeRange3.OffsetUnit = SizeUnit.Factor;
gaugeRange3.RangeOffset = 0.1;
gaugeRange3.StartWidth = 0.05;
gaugeRange3.EndWidth = 0.25;
gaugeRange3.StartValue = 70;
gaugeRange3.EndValue = 100;
gaugeRange3.Fill = new SolidColorBrush(Color.FromRgb(53, 92, 125));
radialAxis.Ranges.Add(gaugeRange3);
this.Content = sfRadialGauge;
Range label
A text can be displayed on range using the Label property. The provided text can be customized using LabelStyle property.
<Grid >
<Grid.Resources>
<gauge:GaugeLabelStyle x:Key="labelStyle" FontSize="20"/>
</Grid.Resources>
<gauge:SfRadialGauge>
<gauge:SfRadialGauge.Axes>
<gauge:RadialAxis ShowLabels="False"
ShowAxisLine="False"
ShowTicks="False"
Minimum="0"
Maximum="99">
<gauge:RadialAxis.Ranges>
<gauge:RadialRange StartValue="0"
EndValue="33"
Label="Slow"
WidthUnit="Factor"
StartWidth="0.65"
EndWidth="0.65"
LabelStyle="{StaticResource labelStyle}"
Fill="#FFFE2A25" />
<gauge:RadialRange StartValue="33"
EndValue="66"
Label="Moderate"
WidthUnit="Factor"
StartWidth="0.65"
EndWidth="0.65"
LabelStyle="{StaticResource labelStyle}"
Fill="#FFFFBA00" />
<gauge:RadialRange StartValue="66"
EndValue="99"
Label="Fast"
WidthUnit="Factor"
StartWidth="0.65"
EndWidth="0.65"
LabelStyle="{StaticResource labelStyle}"
Fill="#FF00AB47" />
<gauge:RadialRange StartValue="0"
EndValue="99"
WidthUnit="Factor"
StartWidth="0.15"
EndWidth="0.15"
OffsetUnit="Factor"
RangeOffset="0.63"
Fill="#4D9b9b9b" />
</gauge:RadialAxis.Ranges>
<gauge:RadialAxis.Pointers>
<gauge:NeedlePointer Value="60"
NeedleLength="0.6"
NeedleStartWidth="2"
NeedleEndWidth="15"
KnobRadius="15"
KnobSizeUnit="Pixel" />
</gauge:RadialAxis.Pointers>
</gauge:RadialAxis>
</gauge:SfRadialGauge.Axes>
</gauge:SfRadialGauge>
</Grid>SfRadialGauge sfRadialGauge = new SfRadialGauge();
RadialAxis radialAxis = new RadialAxis();
radialAxis.ShowLabels = false;
radialAxis.ShowAxisLine = false;
radialAxis.ShowTicks = false;
radialAxis.Minimum = 0;
radialAxis.Maximum = 99;
sfRadialGauge.Axes.Add(radialAxis);
RadialRange gaugeRange1 = new RadialRange();
gaugeRange1.StartValue = 0;
gaugeRange1.EndValue = 33;
gaugeRange1.Label = "Slow";
gaugeRange1.WidthUnit = SizeUnit.Factor;
gaugeRange1.StartWidth = 0.65;
gaugeRange1.EndWidth = 0.65;
gaugeRange1.LabelStyle.FontSize = 20;
gaugeRange1.Fill = new SolidColorBrush(Color.FromRgb(254, 42, 37));
radialAxis.Ranges.Add(gaugeRange1);
RadialRange gaugeRange2 = new RadialRange();
gaugeRange2.StartValue = 33;
gaugeRange2.EndValue = 66;
gaugeRange2.Label = "Moderate";
gaugeRange2.WidthUnit = SizeUnit.Factor;
gaugeRange2.StartWidth = 0.65;
gaugeRange2.EndWidth = 0.65;
gaugeRange2.LabelStyle.FontSize = 20;
gaugeRange2.Fill = new SolidColorBrush(Color.FromRgb(255, 186, 0));
radialAxis.Ranges.Add(gaugeRange2);
RadialRange gaugeRange3 = new RadialRange();
gaugeRange3.StartValue = 66;
gaugeRange3.EndValue = 99;
gaugeRange3.Label = "Fast";
gaugeRange3.WidthUnit = SizeUnit.Factor;
gaugeRange3.StartWidth = 0.65;
gaugeRange3.EndWidth = 0.65;
gaugeRange3.LabelStyle.FontSize = 20;
gaugeRange3.Fill = new SolidColorBrush(Color.FromRgb(0, 171, 71));
radialAxis.Ranges.Add(gaugeRange3);
RadialRange gaugeRange4 = new RadialRange();
gaugeRange4.StartValue = 0;
gaugeRange4.EndValue = 99;
gaugeRange4.WidthUnit = SizeUnit.Factor;
gaugeRange4.StartWidth = 0.15;
gaugeRange4.EndWidth = 0.15;
gaugeRange4.OffsetUnit = SizeUnit.Factor;
gaugeRange4.RangeOffset = 0.63;
gaugeRange4.Fill = new SolidColorBrush(Color.FromRgba(155, 155, 155, 77));
radialAxis.Ranges.Add(gaugeRange4);
NeedlePointer needlePointer = new NeedlePointer();
needlePointer.Value = 60;
needlePointer.NeedleLength = 0.6;
needlePointer.NeedleStartWidth = 2;
needlePointer.NeedleEndWidth = 15;
needlePointer.KnobRadius = 15;
needlePointer.KnobSizeUnit = SizeUnit.Pixel;
radialAxis.Pointers.Add(needlePointer);
this.Content = sfRadialGauge;