Interface IMotionCmdPath

Represents the motion command path.

Namespace: Syncfusion.Presentation

Assembly: Syncfusion.Presentation.Base.dll

Syntax

public interface IMotionCmdPath

Properties

CommandType

Get the command type of motion effect

Declaration

MotionCommandPathType CommandType { get; set; }

Property Value

Type
MotionCommandPathType

Examples

// Create a new presentation.
IPresentation ppDoc = Presentation.Create();
// Add a slide to the presentation.
ISlide slide = ppDoc.Slides.Add(SlideLayoutType.Blank);
// Add shape on the slide
IShape shape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150);
// Add animation effect on the slide with shape
IEffect effect = ppDoc.Slides[0].Timeline.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick);
// Get the behaviors list from the effect
IBehaviors behaviors = effect.Behaviors;
// Get behavior using foreach loop
//Add the line command to move the shape in straight line
PointF[] points = new PointF[1];
points[0] = new PointF(0, 0.25f);
foreach (IBehavior behavior in behaviors)
{
if (behavior is IMotionEffect)
{
// Assign the motion effect values
IMotionEffect motionEffect = (behavior as MotionEffect);
IMotionPath path = (motionEffect.Path as IMotionPath);
path[0].CommandType = MotionCommandPathType.MoveTo;
break;
}
}
// Save the presentation file
ppDoc.Save("Sample.pptx");
// Close the presentation file
ppDoc.Close();

'Create a new presentation
Dim ppDoc As IPresentation = Presentation.Create()
'Add a slide to the presentation.
Dim slide As ISlide = ppDoc.Slides.Add(SlideLayoutType.Blank)
'Add shape on the slide
Dim shape As IShape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150)
'Add animation effect on the slide with shape
Dim effect As IEffect = ppDoc.Slides(0).TimeLine.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick)
'Get the behaviors list from the effect
Dim behaviors As IBehaviors = effect.Behaviors
'Get behavior using foreach loop
For Each behavior As IBehavior In behaviors
'Check condition for behavior is motion effect
If (TypeOf behavior Is IMotionEffect) Then
'Assign the motion effect values
Dim motionEffect As IMotionEffect = TryCast(behavior,IMotionEffect)
Dim path As IMotionPath = TryCast(motionEffect.Path, IMotionPath)
path(0).CommandType = MotionCommandPathType.MoveTo
Exit For
End If
Next
'Save the presentation file
ppDoc.Save("Sample.pptx")
'Close the presentation file
ppDoc.Close()

IsRelative

Get the relative value

Declaration

bool IsRelative { get; set; }

Property Value

Type
System.Boolean

Examples

// Create a new presentation.
IPresentation ppDoc = Presentation.Create();
// Add a slide to the presentation.
ISlide slide = ppDoc.Slides.Add(SlideLayoutType.Blank);
// Add shape on the slide
IShape shape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150);
// Add animation effect on the slide with shape
IEffect effect = ppDoc.Slides[0].Timeline.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick);
// Get the behaviors list from the effect
IBehaviors behaviors = effect.Behaviors;
// Get behavior using foreach loop
foreach (IBehavior behavior in behaviors)
{
if (behavior is IMotionEffect)
{
// Assign the motion effect values
IMotionEffect motionEffect = (behavior as IMotionEffect);
IMotionPath path = (motionEffect.Path as IMotionPath);
path[0].IsRelative = false;
break;
}
}
// Save the presentation file
ppDoc.Save("Sample.pptx");
// Close the presentation file
ppDoc.Close();

'Create a new presentation
Dim ppDoc As IPresentation = Presentation.Create()
'Add a slide to the presentation.
Dim slide As ISlide = ppDoc.Slides.Add(SlideLayoutType.Blank)
'Add shape on the slide
Dim shape As IShape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150)
'Add animation effect on the slide with shape
Dim effect As IEffect = ppDoc.Slides(0).TimeLine.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick)
'Get the behaviors list from the effect
Dim behaviors As IBehaviors = effect.Behaviors
'Get behavior using foreach loop
For Each behavior As IBehavior In behaviors
'Check condition for behavior is motion effect
If (TypeOf behavior Is IMotionEffect) Then
'Assign the motion effect values
Dim motionEffect As IMotionEffect = TryCast(behavior,IMotionEffect)
Dim path As IMotionPath = TryCast(motionEffect.Path, IMotionPath)
path(0).IsRelative = false
Exit For
End If
Next
'Save the presentation file
ppDoc.Save("Sample.pptx")
'Close the presentation file
ppDoc.Close()

Points

Get the path values in points

Declaration

PointF[] Points { get; set; }

Property Value

Type
System.Drawing.PointF[]

Examples

// Create a new presentation.
IPresentation ppDoc = Presentation.Create();
// Add a slide to the presentation.
ISlide slide = ppDoc.Slides.Add(SlideLayoutType.Blank);
// Add shape on the slide
IShape shape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150);
// Add animation effect on the slide with shape
IEffect effect = ppDoc.Slides[0].Timeline.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick);
// Get the behaviors list from the effect
IBehaviors behaviors = effect.Behaviors;
// Get behavior using foreach loop
foreach (IBehavior behavior in behaviors)
{
if (behavior is IMotionEffect)
{
// Assign the motion effect values
IMotionEffect motionEffect = (behavior as IMotionEffect);
IMotionPath path = (motionEffect.Path as IMotionPath);
PointF[] points = path[0].Points;
break;
}
}
// Save the presentation file
ppDoc.Save("Sample.pptx");
// Close the presentation file
ppDoc.Close();

'Create a new presentation
Dim ppDoc As IPresentation = Presentation.Create()
'Add a slide to the presentation.
Dim slide As ISlide = ppDoc.Slides.Add(SlideLayoutType.Blank)
'Add shape on the slide
Dim shape As IShape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150)
'Add animation effect on the slide with shape
Dim effect As IEffect = ppDoc.Slides(0).TimeLine.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick)
'Get the behaviors list from the effect
Dim behaviors As IBehaviors = effect.Behaviors
'Get behavior using foreach loop
For Each behavior As IBehavior In behaviors
'Check condition for behavior is motion effect
If (TypeOf behavior Is IMotionEffect) Then
'Assign the motion effect values
Dim motionEffect As IMotionEffect = TryCast(behavior,IMotionEffect)
Dim path As IMotionPath = TryCast(motionEffect.Path, IMotionPath)
Dim points As PointF() = path(0).Points  
Exit For
End If
Next
'Save the presentation file
ppDoc.Save("Sample.pptx")
'Close the presentation file
ppDoc.Close()

PointsType

Get the points type value of motion effect

Declaration

MotionPathPointsType PointsType { get; set; }

Property Value

Type
MotionPathPointsType

Examples

// Create a new presentation.
IPresentation ppDoc = Presentation.Create();
// Add a slide to the presentation.
ISlide slide = ppDoc.Slides.Add(SlideLayoutType.Blank);
// Add shape on the slide
IShape shape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150);
// Add animation effect on the slide with shape
IEffect effect = ppDoc.Slides[0].Timeline.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick);
// Get the behaviors list from the effect
IBehaviors behaviors = effect.Behaviors;
// Get behavior using foreach loop
foreach (IBehavior behavior in behaviors)
{
if (behavior is IMotionEffect)
{
// Assign the motion effect values
IMotionEffect motionEffect = (behavior as IMotionEffect);
IMotionPath path = (motionEffect.Path as IMotionPath);
path[0].PointsType = MotionPathPointsType.Auto;
break;
}
}
// Save the presentation file
ppDoc.Save("Sample.pptx");
// Close the presentation file
ppDoc.Close();

'Create a new presentation
Dim ppDoc As IPresentation = Presentation.Create()
'Add a slide to the presentation.
Dim slide As ISlide = ppDoc.Slides.Add(SlideLayoutType.Blank)
'Add shape on the slide
Dim shape As IShape = slide.Shapes.AddShape(AutoShapeType.Diamond, 150, 150, 250, 150)
'Add animation effect on the slide with shape
Dim effect As IEffect = ppDoc.Slides(0).TimeLine.MainSequence.AddEffect(shape, EffectType.PathCrescentMoon, EffectSubtype.None, EffectTriggerType.OnClick)
'Get the behaviors list from the effect
Dim behaviors As IBehaviors = effect.Behaviors
'Get behavior using foreach loop
For Each behavior As IBehavior In behaviors
'Check condition for behavior is motion effect
If (TypeOf behavior Is IMotionEffect) Then
'Assign the motion effect values
Dim motionEffect As IMotionEffect = TryCast(behavior,IMotionEffect)
Dim path As IMotionPath = TryCast(motionEffect.Path, IMotionPath)
path(0).PointsType = MotionPathPointsType.Auto
Exit For
End If
Next
'Save the presentation file
ppDoc.Save("Sample.pptx")
'Close the presentation file
ppDoc.Close()