Interface IDiagramCommands

Represents a set of commands to perform the functionalities of the diagram.

Namespace: Syncfusion.UI.Xaml.Diagram

Assembly: Syncfusion.SfDiagram.WPF.dll

Syntax

public interface IDiagramCommands : INotifyPropertyChanged

Properties

AlignBottom

Gets or sets the AlignBottom command to invoke when to align all selected objects along the bottom surface of the reference object.

Declaration

ICommand AlignBottom { get; set; }

Property Value

Type
System.Windows.Input.ICommand

AlignCenter

Gets or sets the AlignCenter command to invoke when to align center all selected objects vertically. It aligns selected objects to the center with respect to the horizontal axis by changing the x-coordinate of the object.

Declaration

ICommand AlignCenter { get; set; }

Property Value

Type
System.Windows.Input.ICommand

AlignLeft

Gets or sets the AlignLeft command to invoke when to align all selected objects along the left corner of the reference object.

Declaration

ICommand AlignLeft { get; set; }

Property Value

Type
System.Windows.Input.ICommand

AlignMiddle

Gets or sets the AlignMiddle command to invoke when to align center all selected objects horizontally. It aligns selected objects to the center with respect to the vertical axis by changing the y-coordinate of the object.

Declaration

ICommand AlignMiddle { get; set; }

Property Value

Type
System.Windows.Input.ICommand

AlignRight

Gets or sets the AlignRight command to invoke when to align all selected objects along the right corner of the reference object.

Declaration

ICommand AlignRight { get; set; }

Property Value

Type
System.Windows.Input.ICommand

AlignTop

Gets or sets the AlignTop command to invoke when to align all selected objects along the top surface of the reference object.

Declaration

ICommand AlignTop { get; set; }

Property Value

Type
System.Windows.Input.ICommand

BringForward

Gets or sets the BringForward command, to moves the selected element over the nearest overlapping element.

Declaration

ICommand BringForward { get; set; }

Property Value

Type
System.Windows.Input.ICommand

BringToFront

Gets or sets the BringToFront command, to visually brings the selected element to the front over all other overlapped elements.

Declaration

ICommand BringToFront { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Cancel

Gets or sets the Cancel command of the DiagramCommands which will cancel the currently performing action in diagram.

Declaration

ICommand Cancel { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Remarks

Currently this command will cancel the following actions

1. Stop the annotation editing and accept the curent value.

2. Reset the diagram tool to select tool

3. Clear the selection of diagram elements

4. Clear the keyboard focus

Examples

Below example shows how to execute the Cancel command

<Syncfusion:SfDiagram x:Name="Diagram" />
<!--Initialize the Button to Execute Cancel command-->
<Button x:Name="Cancel" Content="Cancel" Height="40" Width="130" HorizontalAlignment="Center" VerticalAlignment="Center"  Command="{Binding ElementName=Diagram,Path=Info.Commands.Cancel}"/>

Copy

Gets or sets the Copy command, to copy the selected elements in the diagram.

Declaration

ICommand Copy { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Cut

Gets or sets the Cut command, to cut the selected elements in the diagram.

Declaration

ICommand Cut { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Delete

Gets or sets the Delete command invokes to delete the elements in the diagram.

Declaration

ICommand Delete { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Draw

Gets or sets the Draw command invokes to draw the elements in the diagram.

Declaration

ICommand Draw { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Duplicate

Gets or sets the Duplicate command invokes when the element is duplicated.

Declaration

ICommand Duplicate { get; set; }

Property Value

Type
System.Windows.Input.ICommand

EditAnnotation

Gets or sets the EditAnnotation command of the DiagramCommands which will enble annotation editing mode of the first selected diagram element.

Declaration

ICommand EditAnnotation { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Examples

Below example shows how to execute the EditAnnotation command.

<Syncfusion:SfDiagram x:Name="Diagram" />
<!--Initialize the Button to Execute Edit command-->
<Button x:Name="Edit" Content="EditAnnotation" Height="40" Width="130" HorizontalAlignment="Center" VerticalAlignment="Center"  Command="{Binding ElementName=Diagram,Path=Info.Commands.EditAnnotation}"/>

ExpandCollapse

Gets or sets the ExpandCollapse command invokes when the child elements are going to expand or collapse.

Declaration

ICommand ExpandCollapse { get; set; }

Property Value

Type
System.Windows.Input.ICommand

FitToPage

Gets or sets the FitToPage command invokes to bring the entire Diagram into the view.

Declaration

ICommand FitToPage { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Flip

Gets or sets the Flip command invokes to be mirrored the elements horizontally, vertically, or both.

Declaration

ICommand Flip { get; set; }

Property Value

Type
System.Windows.Input.ICommand

FocusToNextItem

Gets or sets the FocusToNextItem command invokes when the keyboard tab key is pressed.

Declaration

ICommand FocusToNextItem { get; set; }

Property Value

Type
System.Windows.Input.ICommand

FocusToPreviousItem

Gets or sets the FocusToPreviousItem command invokes when the keyboard tab with shift key is pressed.

Declaration

ICommand FocusToPreviousItem { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Group

Gets or sets the Group command to invoke when groups the selected elements.

Declaration

ICommand Group { get; set; }

Property Value

Type
System.Windows.Input.ICommand

InvalidateLayout

Gets or sets the SelectFocusedItem command invokes when the keyboard enter is pressed.

Declaration

ICommand InvalidateLayout { get; set; }

Property Value

Type
System.Windows.Input.ICommand

MoveDown

Gets or sets the MoveDown command, to move the selected elements downwards in the diagram.

Declaration

ICommand MoveDown { get; set; }

Property Value

Type
System.Windows.Input.ICommand

MoveLeft

Gets or sets the MoveLeft command, to move the selected elements left side in the diagram.

Declaration

ICommand MoveLeft { get; set; }

Property Value

Type
System.Windows.Input.ICommand

MoveRight

Gets or sets the MoveRight command, to move the selected elements right side in the diagram.

Declaration

ICommand MoveRight { get; set; }

Property Value

Type
System.Windows.Input.ICommand

MoveUp

Gets or sets the MoveUp command, to move the selected elements upwards in the diagram.

Declaration

ICommand MoveUp { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Paste

Gets or sets the Paste command, to paste the copied elements in the diagram.

Declaration

ICommand Paste { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Redo

Gets or sets the Redo command to invoke when perform the redo action in Diagram.

Declaration

ICommand Redo { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Reset

Gets or sets the reset command to invoke when reset horizontal Offset, vertical Offset, and zoom level of the diagram.

Declaration

ICommand Reset { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Rotate

Gets or sets the Rotate Command invokes to rotate the elements in diagram.

Declaration

ICommand Rotate { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SameHeight

Gets or sets the SameHeight command to invoke when vertically scales the selected items to the height of first selected object

Declaration

ICommand SameHeight { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SameSize

Gets or sets the SameSize command to invoke when scales the selected items to the size of first selected object

Declaration

ICommand SameSize { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SameWidth

Gets or sets the SameWidth command to invoke when horizontally scales the selected items to the width of first selected object

Declaration

ICommand SameWidth { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SelectAll

Gets or sets the SelectAll command to invoke when to select all the elements in the diagram.

Declaration

ICommand SelectAll { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SelectByType

Gets or sets the SelectByType Command invokes to select the specified type of elements in the diagram.

Declaration

ICommand SelectByType { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SelectFocusedItem

Gets or sets the SelectFocusedItem command invokes when the keyboard enter is pressed.

Declaration

ICommand SelectFocusedItem { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SelectTool

Gets or sets the SelectTool command of the DrawingTool which will change the SelectTool and Tool properties to specified values.

Declaration

ICommand SelectTool { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Remarks

This command will receive SelectToolCommandParameter as command which contains the Tool, DrawingTool and ConnectorType informations to enable drawing tool option in diagram.

Examples

Below example shows how to execute the SelectTool command and provide SelectToolCommandParameter value for the command using click event.

<Syncfusion:SelectToolCommandParameter DrawingTool="Ellipse" Tool="ContinuesDraw"  x:Key="SelectToolEllipseCommandParameter"/>
<Syncfusion:SelectToolCommandParameter DrawingTool=" Connector" Tool="ContinuesDraw" ConnectorType =” Connector” x:Key="SelectToolConnectorCommandParameter"/>
<Syncfusion:SfDiagram x:Name="Diagram" />
<!--Initialize the Button to Execute SelectTool command for enable EllipseTool -->
<Button x:Name="EllipseTool" Content="Rotate ClockWise" Height="40" Width="130" HorizontalAlignment="Center" VerticalAlignment="Center"  Command="{Binding ElementName=Diagram,Path=Info.Commands. SelectTool}"       CommandParameter="{StaticResource SelectToolEllipseCommandParameter}"/>
<!--Initialize the Button to Execute SelectTool command for enable Connector Tool-->
<Button x:Name="ConnectorTool" Content="ConnectorTool" Height="40" Width="130" HorizontalAlignment="Center" VerticalAlignment="Center"  Command="{Binding ElementName=Diagram,Path=Info.Commands. SelectTool}"  CommandParameter="{StaticResource SelectToolConnectorCommandParameter }"/>

SendBackward

Gets or sets the SendBackward command, to visually moves the selected elements behind the underlying element.

Declaration

ICommand SendBackward { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SendToBack

Gets or sets the SendToBack command, to visually moves the selected elements behind all the other overlapped elements.

Declaration

ICommand SendToBack { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SetShapeStyle

Gets or sets the SetShapeStyle Command invokes to apply specified style for the selected elements in the diagram.

Declaration

ICommand SetShapeStyle { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SpaceAcross

Gets or sets the SpaceAcross command, to equally spaces the selected nodes horizontally.

Declaration

ICommand SpaceAcross { get; set; }

Property Value

Type
System.Windows.Input.ICommand

SpaceDown

Gets or sets the SpaceDown command, to equally spaces the selected nodes vertically.

Declaration

ICommand SpaceDown { get; set; }

Property Value

Type
System.Windows.Input.ICommand

ToggleBold

Gets or sets the ToggleBold Command invokes to apply specified style for the selected elements in the diagram.

Declaration

ICommand ToggleBold { get; set; }

Property Value

Type
System.Windows.Input.ICommand

ToggleItalic

Gets or sets the ToggleItalic Command invokes to apply specified style for the selected elements in the diagram.

Declaration

ICommand ToggleItalic { get; set; }

Property Value

Type
System.Windows.Input.ICommand

ToggleStrikeThrough

Gets or sets the ToggleStrikeThrough Command invokes to apply specified style for the selected elements in the diagram.

Declaration

ICommand ToggleStrikeThrough { get; set; }

Property Value

Type
System.Windows.Input.ICommand

ToggleUnderline

Gets or sets the ToggleUnderline Command invokes to apply specified style for the selected elements in the diagram.

Declaration

ICommand ToggleUnderline { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Undo

Gets or sets the undo command to invoke when history of the diagram is changed.

Declaration

ICommand Undo { get; set; }

Property Value

Type
System.Windows.Input.ICommand

UnGroup

Gets or sets the UnGroup command to invoke when ungroups the selected elements.

Declaration

ICommand UnGroup { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Zoom

Gets or sets the zoom command to invoke when zoom-in and zoom-out the diagram view.

Declaration

ICommand Zoom { get; set; }

Property Value

Type
System.Windows.Input.ICommand

Methods

CanAlignBottomExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the alignbottom command can be executed on the command target.

Declaration

bool CanAlignBottomExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanAlignCenterExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the aligncenter command can be executed on the command target.

Declaration

bool CanAlignCenterExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanAlignLeftExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the alignleft command can be executed on the command target.

Declaration

bool CanAlignLeftExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanAlignMiddleExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the alignmiddle command can be executed on the command target.

Declaration

bool CanAlignMiddleExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanAlignRightExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the alignright command can be executed on the command target.

Declaration

bool CanAlignRightExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanAlignTopExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the aligntop command can be executed on the command target.

Declaration

bool CanAlignTopExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanBringForwardExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the bringforward command can be executed on the command target.

Declaration

bool CanBringForwardExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanBringToFrontExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the bringtofront command can be executed on the command target.

Declaration

bool CanBringToFrontExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanCopyExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the copy command can be executed on the command target.

Declaration

bool CanCopyExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanCutExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the cut command can be executed on the command target.

Declaration

bool CanCutExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanDeleteExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the delete command can be executed on the command target.

Declaration

bool CanDeleteExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanDrawExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the draw command can be executed on the command target.

Declaration

bool CanDrawExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanDuplicateExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the duplicate command can be executed on the command target.

Declaration

bool CanDuplicateExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExecuteCancelCommand(Object)

Occurs when the Cancel command associated with CommandBinding initiates a check to determine whether the Cancel command can be executed or not based on the command target.

Declaration

bool CanExecuteCancelCommand(object param)

Parameters

Type	Name	Description
System.Object	param	Provide the bool value to execute the CancelCommand.

Returns

Type
System.Boolean

CanExecuteEditAnnotationCommand(Object)

Occurs when the EditAnnotation command associated with CommandBinding initiates a check to determine whether the Edit command can be executed or not based on the command target.

Declaration

bool CanExecuteEditAnnotationCommand(object param)

Parameters

Type	Name	Description
System.Object	param	Provide the bool value to execute the EditCommand.

Returns

Type
System.Boolean

CanExecuteSelectToolCommand(Object)

Occurs when the SelectTool command associated with CommandBinding initiates a check to determine whether the SelectTool command can be executed or not based on the command target.

Declaration

bool CanExecuteSelectToolCommand(object param)

Parameters

Type	Name	Description
System.Object	param	Provide the bool value to execute the SelectTool command.

Returns

Type
System.Boolean

CanExecuteSetShapeStyleCommand(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the apply style command can be executed on the command target.

Declaration

bool CanExecuteSetShapeStyleCommand(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExecuteToggleBoldCommand(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the apply style command can be executed on the command target.

Declaration

bool CanExecuteToggleBoldCommand(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExecuteToggleItalicCommand(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the apply style command can be executed on the command target.

Declaration

bool CanExecuteToggleItalicCommand(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExecuteToggleStrikeThroughCommand(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the apply style command can be executed on the command target.

Declaration

bool CanExecuteToggleStrikeThroughCommand(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExecuteToggleUnderlineCommand(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the apply style command can be executed on the command target.

Declaration

bool CanExecuteToggleUnderlineCommand(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanExpandCollapseExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the expandcollapse command can be executed on the command target.

Declaration

bool CanExpandCollapseExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanFitToPageExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the fittopage command can be executed on the command target.

Declaration

bool CanFitToPageExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanFlipExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the flip command can be executed on the command target.

Declaration

bool CanFlipExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanFocusToNextItemExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the focustonextitem command can be executed on the command target.

Declaration

bool CanFocusToNextItemExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanFocusToPreviousItemExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the focustopreviousitem command can be executed on the command target.

Declaration

bool CanFocusToPreviousItemExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanGroupExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the group command can be executed on the command target.

Declaration

bool CanGroupExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanInvalidateLayoutExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the selectfocuseditem command can be executed on the command target.

Declaration

bool CanInvalidateLayoutExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanMoveDownExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the movedown command can be executed on the command target.

Declaration

bool CanMoveDownExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanMoveLeftExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the moveleft command can be executed on the command target.

Declaration

bool CanMoveLeftExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanMoveRightExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the moveright command can be executed on the command target.

Declaration

bool CanMoveRightExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanMoveUpExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the moveup command can be executed on the command target.

Declaration

bool CanMoveUpExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanPasteExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the paste command can be executed on the command target.

Declaration

bool CanPasteExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanRedoExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the redo command can be executed on the command target.

Declaration

bool CanRedoExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanResetExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the reset command can be executed on the command target.

Declaration

bool CanResetExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanRotateExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the rotate command can be executed on the command target.

Declaration

bool CanRotateExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSameHeightExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the sameheight command can be executed on the command target.

Declaration

bool CanSameHeightExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSameSizeExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the samesize command can be executed on the command target.

Declaration

bool CanSameSizeExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSameWidthExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the samewidth command can be executed on the command target.

Declaration

bool CanSameWidthExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSelectAllExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the selectall command can be executed on the command target.

Declaration

bool CanSelectAllExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSelectByTypeExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the select type command can be executed on the command target.

Declaration

bool CanSelectByTypeExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSelectFocusedItemExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the selectfocuseditem command can be executed on the command target.

Declaration

bool CanSelectFocusedItemExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSendBackwardExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the sendbackward command can be executed on the command target.

Declaration

bool CanSendBackwardExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSendToBackExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the senttoback command can be executed on the command target.

Declaration

bool CanSendToBackExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSpaceAcrossExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the spaceacross command can be executed on the command target.

Declaration

bool CanSpaceAcrossExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanSpaceDownExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the spacedown command can be executed on the command target.

Declaration

bool CanSpaceDownExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanUndoExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the undo command can be executed on the command target.

Declaration

bool CanUndoExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanUnGroupExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the ungroup command can be executed on the command target.

Declaration

bool CanUnGroupExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

CanZoomExecute(Object)

Occurs when the command associated with this CommandBinding initiates a check to determine whether the zoom command can be executed on the command target.

Declaration

bool CanZoomExecute(object param)

Parameters

Type	Name	Description
System.Object	param

Returns

Type
System.Boolean

ExecuteCancelCommand(Object)

Cancel the currently performing action in the diagram.

Declaration

void ExecuteCancelCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteEditAnnotationCommand(Object)

Enable the annotation editing mode for the first selected diagram element.

Declaration

void ExecuteEditAnnotationCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteSelectToolCommand(Object)

Enables the drawing SelectTool in the diagram with specified value.

Declaration

void ExecuteSelectToolCommand(object param)

Parameters

Type	Name	Description
System.Object	param	Provide the datas like Tool, DrawingTool and ConnectorType

ExecuteSetShapeStyleCommand(Object)

Represents a method to apply specified style to the selected objects in diagram.

Declaration

void ExecuteSetShapeStyleCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteToggleBoldCommand(Object)

Represents a method to apply specified style to the selected objects in diagram.

Declaration

void ExecuteToggleBoldCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteToggleItalicCommand(Object)

Represents a method to apply specified style to the selected objects in diagram.

Declaration

void ExecuteToggleItalicCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteToggleStrikeThroughCommand(Object)

Represents a method to apply specified style to the selected objects in diagram.

Declaration

void ExecuteToggleStrikeThroughCommand(object param)

Parameters

Type	Name	Description
System.Object	param

ExecuteToggleUnderlineCommand(Object)

Represents a method to apply specified style to the selected objects in diagram.

Declaration

void ExecuteToggleUnderlineCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignBottomCommand(Object)

Represents a method to used align all selected objects along the bottom surface of the reference object.

Declaration

void OnAlignBottomCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignCenterCommand(Object)

Represents a method to used align center all selected objects vertically. It aligns selected objects to the center with respect to the horizontal axis by changing the x-coordinate of the object.

Declaration

void OnAlignCenterCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignLeftCommand(Object)

Represents a method to used align all selected objects along the left corner of the reference object.

Declaration

void OnAlignLeftCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignMiddleCommand(Object)

Represents a method to used align center all selected objects horizontally. It aligns selected objects to the center with respect to the vertical axis by changing the y-coordinate of the object.

Declaration

void OnAlignMiddleCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignRightCommand(Object)

Represents a method to used align all selected objects along the right corner of the reference object.

Declaration

void OnAlignRightCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnAlignTopCommand(Object)

Represents a method to used align all selected objects along the top surface of the reference object.

Declaration

void OnAlignTopCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnBringForwardCommand(Object)

Represents a method used to moves the selected element over the nearest overlapping element.

Declaration

void OnBringForwardCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnBringToFrontCommand(Object)

Represents a method used to visually brings the selected element to the front over all other overlapped elements.

Declaration

void OnBringToFrontCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnCopyCommand(Object)

Represents a method used to copy the selected elements in the diagram.

Declaration

void OnCopyCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnCutCommand(Object)

Represents a method used to cut the selected elements in the diagram.

Declaration

void OnCutCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnDeleteCommand(Object)

Represents a method used to delete the elements in the diagram.

Declaration

void OnDeleteCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnDrawCommand(Object)

Represents a method used to draw the elements in the diagram.

Declaration

void OnDrawCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnDuplicateCommand(Object)

Represents a method used to duplicate the element.

Declaration

void OnDuplicateCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnExpandCollapse(Object)

Represents a method used to expand or collapse the child elements.

Declaration

void OnExpandCollapse(object param)

Parameters

Type	Name	Description
System.Object	param

OnFitToPageCommand(Object)

Represents a method used to bring the entire Diagram into the view.

Declaration

void OnFitToPageCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnFlipCommand(Object)

Represents a method used to be mirrored the elements horizontally, vertically, or both.

Declaration

void OnFlipCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnFocusToNextItemCommand(Object)

Represents a method used to focus the nextitem in the diagram.

Declaration

void OnFocusToNextItemCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnFocusToPreviousItemCommand(Object)

Represents a method used to focus the previousitem in the diagram.

Declaration

void OnFocusToPreviousItemCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnGroupCommand(Object)

Represents a method to used groups the selected elements..

Declaration

void OnGroupCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnInvalidateLayoutCommand(Object)

Represents a method used to select the focused item in the diagram.

Declaration

void OnInvalidateLayoutCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnMoveDownCommand(Object)

Represents a method used to move the selected elements downwards in the diagram.

Declaration

void OnMoveDownCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnMoveLeftCommand(Object)

Represents a method used to move the selected elements left side in the diagram.

Declaration

void OnMoveLeftCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnMoveRightCommand(Object)

Represents a method used to move the selected elements right side in the diagram.

Declaration

void OnMoveRightCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnMoveUpCommand(Object)

Represents a method used to move the selected elements upwards in the diagram.

Declaration

void OnMoveUpCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnPasteCommand(Object)

Represents a method used to paste the copied elements in the diagram.

Declaration

void OnPasteCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnRedoCommand(Object)

Represents a method to perform the redo action in Diagram.

Declaration

void OnRedoCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnResetCommand(Object)

Represents a method to used reset horizontal Offset, vertical Offset, and zoom level of the diagram.

Declaration

void OnResetCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnRotateCommand(Object)

Represent a method to rotate the selected node in the diagram.

Declaration

void OnRotateCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSameHeightCommand(Object)

Represents a method to used vertically scales the selected items to the height of first selected object

Declaration

void OnSameHeightCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSameSizeCommand(Object)

Represents a method to used scales the selected items to the size of first selected object

Declaration

void OnSameSizeCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSameWidthCommand(Object)

Represents a method to used horizontally scales the selected items to the width of first selected object

Declaration

void OnSameWidthCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSelectAllCommand(Object)

Represents a method to used select all the elements in the diagram.

Declaration

void OnSelectAllCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSelectByTypeCommand(Object)

Represent a method to select the specified type of objects in the diagram.

Declaration

void OnSelectByTypeCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSelectFocusedItemCommand(Object)

Represents a method used to select the focused item in the diagram.

Declaration

void OnSelectFocusedItemCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSendBackwardCommand(Object)

Represents a method used to visually moves the selected elements behind the underlying element.

Declaration

void OnSendBackwardCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSendToBackCommand(Object)

Represents a method to used visually moves the selected elements behind all the other overlapped elements.

Declaration

void OnSendToBackCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSpaceAcrossCommand(Object)

Represents a method to used equally spaces the selected nodes horizontally.

Declaration

void OnSpaceAcrossCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnSpaceDownCommand(Object)

Represents a method to used equally spaces the selected nodes vertically.

Declaration

void OnSpaceDownCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnUndoCommand(Object)

The Undo command reverses the last editing action performed.

Declaration

void OnUndoCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnUnGroupCommand(Object)

Represents a method to used ungroups the selected elements.

Declaration

void OnUnGroupCommand(object param)

Parameters

Type	Name	Description
System.Object	param

OnZoomCommand(Object)

Zoom commands are used to zoom-in and zoom-out the Diagram view.

Declaration

void OnZoomCommand(object param)

Parameters

Type	Name	Description
System.Object	param