Connector

Connectors are objects used to create link between two points, nodes or ports to represent the relationships between them.

Create Connector

Connector can be created by defining the start and end points. The path to be drawn can be defined with a collection of segments.
To explore the properties of a Connector, refer to Connector Properties.

Add connectors through connectors collection

The SourcePoint and TargetPoint properties of connector allow you to define the end points of a Connector. The following code example illustrates how to add a connector through connector collection.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="Connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Add connector at run time

    Connectors can be added at runtime with the client side method, add. The following code example illustrates how to add connector at runtime.

  • js
  • // Defines JSON
    var connector = {
    	name: "connector",
    	sourcePoint: {
    		x: 100,
    		y: 100
    	},
    	targetPoint: {
    		x: 200,
    		y: 200
    	}
    };
    var diagram = $("#DiagramContent").ejDiagram("instance");
    // Adds to the Diagram
    diagram.add(connector);

    Connectors from palette

    Connectors can be predefined and added to the symbol palette. You can drop those connectors into the Diagram, when required.

    For more information about adding connectors from symbol palette, refer to Symbol Palette.

    Connectors through data source

    Connectors are automatically generated based on the relationships defined through the data source.
    The default properties for these connectors are fetched from default settings.

    For more information about data source, refer to Data Binding.

    Draw connectors

    Connectors can be interactively drawn by clicking and dragging on the Diagram surface by using DrawingTool. For more information about drawing connectors, refer to Draw Connectors.

    Update Connector at runtime

    The client side method, updateConnector is used to update the connectors at run time. The following code example illustrates how to update a connector at runtime.

  • js
  • var diagram = $("#DiagramContent").ejDiagram("instance");
    diagram.updateConnector("connectorName", {
    	lineColor: "#1BA0E2",
    	lineWidth: 5,
    	lineDashArray: "5,5"
    });

    Connect nodes

    The SourceNode and TargetNode properties allow to define the nodes to be connected. The following code example illustrates how to connect two nodes.

    <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Nodes--%>
    	<Nodes>
    		<ej:BasicShape Name="task1" OffsetX="200" OffsetY="200" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 1"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    		<ej:BasicShape Name="task2" OffsetX="400" OffsetY="200" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 2"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    	</Nodes>
    	
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="Connector1" SourceNode="task1" TargetNode="task2">
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>
    protected void Page_Load(object sender, EventArgs e)
    {
    	if (!IsPostBack)
    	{
    		//Defines the properties that carry the common values
    		Diagram.Model.DefaultSettings.Node = new FlowShape() {
    			FillColor = "darkCyan",
    			BorderColor = "black",
    			Shape = FlowShapes.Process
    		};
    		Diagram.Model.DefaultSettings.Node.Labels.Add(new Label() { FontColor = "white" });
    	}
    }

    NOTE

    By default, connections are created at the intersecting point of segments and node bounds. The connection between any specific point of source and target nodes can be achieved with connection ports.

    Connections with ports

    The SourcePort and TargetPort properties allow to create connections between some specific points of source/target nodes. The following code example illustrates how to create port to port connections.

    <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Nodes--%>
    	<Nodes>
    		<ej:BasicShape Name="task1" OffsetX="350" OffsetY="300" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 1"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    		<ej:BasicShape Name="task2" OffsetX="200" OffsetY="250" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 2"></ej:DiagramLabel>
    			</Labels>
    			<%--Defines ports for task2--%>
    			<Ports>
    				<ej:DiagramPort Name="in" Shape="Circle" Visibility="Visible" FillColor="black">
    					<offset x="1" y="0.65"></offset>
    				</ej:DiagramPort>
    				<ej:DiagramPort Name="out" Shape="Circle" Visibility="Visible" FillColor="black">
    					<offset x="1" y="0.35"></offset>
    				</ej:DiagramPort>
    			</Ports>
    		</ej:BasicShape>
    		<ej:BasicShape Name="task3" OffsetX="350" OffsetY="200" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 3"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    	</Nodes>
    	<%--Create Connectors--%>
    	<Connectors>
    		<%--Name of the target port defined in the target node--%>
    		<ej:DiagramConnector Name="flow1" SourceNode="task1" TargetNode="task2" TargetPort="in">
    		</ej:DiagramConnector>
    		<%--Name of the source port defined in the source node--%>
    		<ej:DiagramConnector Name="flow1" SourceNode="task2" TargetNode="task3" SourcePort="out">
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>
    protected void Page_Load(object sender, EventArgs e)
    {
    	if (!IsPostBack)
    	{
    		//Defines the common values for the nodes
    		Diagram.Model.DefaultSettings.Node = new FlowShape() { 
    			FillColor = "darkCyan",
    			BorderColor = "black",
    			Shape = FlowShapes.Process
    		};
    		Diagram.Model.DefaultSettings.Node.Labels.Add(new Label() { FontColor = "white" });
    		//Defines common values for connectors
    		Diagram.Model.DefaultSettings.Connector = new Connector();
    		Diagram.Model.DefaultSettings.Connector.Segments.Add(new Segment() { Type = Segments.Orthogonal });
    	}
    }

    Segments

    The path of the connector is defined with a collection of segments. There are three types of segments.

    Straight

    Straight segment allows to create a straight line.
    To create a straight line, you should specify the Type of the segment as “straight” and add a straight segment to Segments collection. The following code example illustrates how to create a default straight segment.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			<%--Defines segment collection
    			When there is no previous segment, line starts from source point
    			When the end point is not specified, line ends at target point
    			Defines the type of the segment--%>
    			<Segments>
    				<ej:DiagramSegment Type="Straight"></ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    The Point property of straight segment allows you to define the end point of it. The following code example illustrates how to define the end point of a straight segment.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			
    			<%--Defines segment collection--%>
    			<%--Defines the type of the segment--%>
    			<Segments>
    				<ej:DiagramSegment Type="Straight">
    					<%--Defines the end point of the segment--%>
    					<%--Additional straight line will be drawn from this end point to the target point--%>
    					<Point x="100" y="200"></Point>
    				</ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Orthogonal

    Orthogonal segments are used to create segments that are perpendicular to each other.

    Set the segment Type as “Orthogonal” to create a default orthogonal segment. The following code example illustrates how to create a default orthogonal segment.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			
    			<%--Defines segment collection
    			Defines the type of the segment--%>
    			<Segments>
    				<ej:DiagramSegment Type="Orthogonal"></ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    The Length and Direction properties allow to define the flow and length of segment. The following code example illustrates how to create customized orthogonal segments.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			
    			<%--Defines segment collection--%>
    			<%--Defines the type of the segment--%>
    			<Segments>
    				<%--Orthogonal segment of 50px length to the bottom--%>
    				<%--Additional orthogonal segments will be added from the end of the last segment to the target point--%>
    				<ej:DiagramSegment Type="Orthogonal" Length="50" Direction="bottom"></ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Avoid overlapping

    Orthogonal segments are automatically re-routed, in order to avoid overlapping with the source and target nodes. The following images illustrate how orthogonal segments are re-routed.

    NOTE

    Overlapping with source and target nodes are only avoided. Other nodes are not considered as obstacles.

    Bezier

    Bezier segments are used to create curve segments and the curves are configurable either with the control points or with vectors.

    To create a bezier segment, the Segment.Type is set as Bezier. The following code example illustrates how to create a default Bezier segment.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			
    			<%--Defines segment collection--%>
    			<%--Defines the type of the segment--%>
    			<Segments>
    				<ej:DiagramSegment Type="Bezier"></ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    The Point1 and Point2 properties of bezier segment enable you to set the control points. The following code example illustrates how to configure the Bezier segments with control points.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			<%--Defines segment collection--%>
    			<Segments>
    				<%--Defines the type of the segment--%>
    				<ej:DiagramSegment Type="Bezier">
    					<%--First control point: an absolute position from the page origin--%>
    					<Point1 x="125" y="75"></Point1>
    					<%--Second control point: an absolute position from the page origin--%>
    					<Point2 x="225" y="75"></Point2>
    				</ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    The Vector1 and Vector2 properties of bezier segment enable you to define the vectors. The following code illustrates how to configure a bezier curve with vectors.

  • js
  • //Defines JSON
    var connector = {
    	name: "connector",
    	sourcePoint: { x: 100, y: 200 },
    	targetPoint: { x: 250, y: 200 },
    	//Defines segment collection
    	segments: [
    	{
    		// Defines the type of the segment
    		type: "bezier",
    		// Length and angle between the source point and the first control point
    		vector1: { angle: 270, distance: 75 },
    		// Length and angle between the target point and the second control point
    		vector2: { angle: 270, distance: 75 }
    	}]
    };
    connectors.push(connector);

    Complex segments

    Multiple segments can be defined one after another. To create a connector with multiple segments, define and add the segments to Connector.Segments collection. The Following code example illustrates how to create a connector with multiple segments.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="200"></sourcepoint>
    			<targetPoint x="250" y="300"></targetPoint>
    			<%--Defines segment collection--%>
    			<Segments>
    				<%--Segment of length 100px to the bottom--%>
    				<ej:DiagramSegment Type="Orthogonal" Length="100" Direction="bottom"></ej:DiagramSegment>
    				<%--Segment of length 150px to the bottom--%>
    				<ej:DiagramSegment Type="Orthogonal" Length="150" Direction="right"></ej:DiagramSegment>
    				<%--Additional orthogonal segments will be added from the end of the last segment to the target point--%>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Decorator

    Start and end points of a connector can be decorated with some customizable shapes like arrows, circles, diamond or path. You can decorate the connection end points with the SourceDecorator and TargetDecorator properties of connector.
    To explore the properties of decorators, refer to Decorator Properties.

    The Shape property of decorator allows to define the shape of the decorators. The following code example illustrates how to create decorators of various shapes.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<ej:DiagramConnector Name="connector1">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    				<%--Decorator shape - Circle--%>
    			<SourceDecorator Shape="Circle" Width="10" Height="10"  />
    				<%--Decorator shape - Arrow--%>
    			<TargetDecorator Shape="Arrow" Width="10" Height="10"  />
    		</ej:DiagramConnector>
    
    		<ej:DiagramConnector Name="connector2">
    			<%--Sets source and target points--%>
    			<sourcepoint x="300" y="100"></sourcepoint>
    			<targetPoint x="400" y="200"></targetPoint>
    			<%--Decorator shape - Diamond--%>
    			<SourceDecorator Shape="Diamond" Width="10" Height="10"  />
    			<%--Decorator shape - Open Arrow--%>
    			<TargetDecorator Shape="OpenArrow" Width="10" Height="10"  />
    		</ej:DiagramConnector>
    		<ej:DiagramConnector Name="connector3">
    			<%--Sets source and target points--%>
    			<sourcepoint x="500" y="100"></sourcepoint>
    			<targetPoint x="600" y="200"></targetPoint>
    			<%--Decorator shape - Path--%>
    			<SourceDecorator Shape="Path" PathData="M 376.892,225.284L 371.279,211.95L 376.892,198.617L 350.225,211.95L 376.892,225.284 Z" Width="10" Height="10"  />
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Padding

    Padding is used to leave space between the Connector’s end point and the object to where it is connected.

    The SourcePadding and TargetPadding properties of connector define the space to be left between the connection end points and the source and target nodes of connector. The following code example illustrates how to leave space between the connection end points and source, target nodes.

  • aspx-cs
  • <%--   Initializes Diagram--%>
            <ej:Diagram ID="Diagram" runat="server" Height="600px" Width="900px">
                <%--    Add the node to the nodes collection --%>
                <Nodes>
                    <%--Defines nodes--%>
                    <ej:BasicShape Name="task1" OffsetX="100" OffsetY="100" Height="50" Width="100" FillColor="darkCyan" BorderColor="black">
                        <labels>
                        <ej:DiagramLabel Name="task1" Text="Task 1" FontColor="White"></ej:DiagramLabel>
                    </labels>
                    </ej:BasicShape>
                    <ej:BasicShape Name="task2" OffsetX="300" OffsetY="100" Height="50" Width="100" FillColor="darkCyan" BorderColor="black">
                        <labels>
                        <ej:DiagramLabel Name="task2" Text="Task 2" FontColor="White" ></ej:DiagramLabel>
                    </labels>
                    </ej:BasicShape>
                </Nodes>
                <Connectors>
                    <ej:DiagramConnector Name="flow1" SourceNode="task1" TargetNode="task2" SourcePadding="10" TargetPadding="10"></ej:DiagramConnector>
                </Connectors>
    
            </ej:Diagram>

    The ConnectorPadding property of node defines the space to be left between the node bounds and its edges. The following code example illustrates how to leave the space between a node and its connections.

  • c#
  • //Create nodes
    Node task1 = new Node() { Name = "task1", OffsetX = 200, OffsetY = 200 };
    task1.Labels.Add(new Label() { Text = "Task 1" });
    //Space between the node and its edges
    task1.ConnectorPadding = 5;
    
    Node task2 = new Node() { Name = "task2", OffsetX = 400, OffsetY = 200 };
    task2.Labels.Add(new Label() { Text = "Task 2" });
    
    //Sets nodes collection to the Diagram model
    Diagram.Model.Nodes.Add(task1);
    Diagram.Model.Nodes.Add(task2);
    
    //Create a connector
    Connector connector = new Connector() { Name = "flow1", SourceNode = "task1", TargetNode = "task2" };
    Diagram.Model.Connectors.Add(connector);

    The ConnectorPadding property of port defines the space between the ports and its in/out edges. The following code example illustrates how to leave the space between ports and its connections.

  • c#
  • //Create nodes
    Node task1 = new Node() { Name = "task1", OffsetX = 200, OffsetY = 200 };
    task1.Labels.Add(new Label() { Text = "Task 1" });
    
    Node task2 = new Node() { Name = "task2", OffsetX = 400, OffsetY = 200 };
    task2.Labels.Add(new Label() { Text = "Task 2" });
    task2.Ports.Add(new Port()
    {
    	Name = "port",
    	Offset = new DiagramPoint(0f, 0.5f),
    	Shape = PortShapes.Circle,
    	Visibility = PortVisibility.Visible,
    	FillColor = "black",
    	ConnectorPadding = 5
    });
    
    //Sets nodes collection to the Diagram model
    Diagram.Model.Nodes.Add(task1);
    Diagram.Model.Nodes.Add(task2);
    
    //Create a connector
    Connector connector = new Connector() {
    	Name = "flow1", SourceNode = "task1",
    	TargetNode = "task2", TargetPort = "port"
    };
    Diagram.Model.Connectors.Add(connector);

    Bridging

    Line Bridging creates a bridge for lines to smartly cross over other lines, at points of intersection. When two line connectors meet each other, the line with the higher z-order (upper one) draws an arc over the underlying connector.
    Bridging can be enabled/disabled either with the Connector.Constraints or Diagram.Constraints. The following code example illustrates how to enable line bridging.

  • c#
  • //Enables bridging for a single connector
    Connector connector = new Connector()
    {
    	Name = "connector1",
    	SourcePoint = new DiagramPoint(100f, 100f),
    	TargetPoint = new DiagramPoint(200f, 200f),
    	//Removes inherit bridging or else bridging is enabled/disabled based on the Diagram constraints
    	//And includes bridging
    	Constraints = ConnectorConstraints.Default & ~ConnectorConstraints.InheritBridging | ConnectorConstraints.Bridging
    };
    
    //Enables bridging for every connector added in the model
    Diagram.Model.Constraints = DiagramConstraints.Default | DiagramConstraints.Bridging;

    The direction of the bridge can be customized with the property BridgeDirection. BridgeDirection defines the intersecting segment where the bridge has to be inserted. By default, the bridge direction points to the top.

    To explore the bridge directions, refer to Bridge Directions.

    The following code example illustrates how to draw the bridge at the bottom direction.

  • c#
  • //Sets the bridge direction
    Diagram.Model.BridgeDirection = BridgeDirection.Bottom;
    
    //Enables bridging for every connector added in the model
    Diagram.Model.Constraints = DiagramConstraints.Default | DiagramConstraints.Bridging;

    Limitation: Bezier segments do not support bridging.

    Corner radius

    Corner radius allows to create connectors with rounded corners. The radius of the rounded corner is set with CornerRadius property.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Nodes--%>
    	<Nodes>
    		<ej:BasicShape Name="task1" OffsetX="350" OffsetY="300" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 1"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    		<ej:BasicShape Name="task2" OffsetX="200" OffsetY="250" Width ="100" Height ="50">
    			<Labels>
    				<ej:DiagramLabel Text="Task 2"></ej:DiagramLabel>
    			</Labels>
    		</ej:BasicShape>
    	</Nodes>
    	<%--Create Connectors--%>
    	<Connectors>
    		<%--Sets the radius for the rounded corner--%>
    		<ej:DiagramConnector Name="flow1" SourceNode="task1" TargetNode="task2" CornerRadius="10">
    			<Segments>
    				<ej:DiagramSegment Type="Orthogonal"></ej:DiagramSegment>
    			</Segments>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Appearance

    Stroke width, stroke color, and style of the lines and decorators can be customized with a set of defined properties.

    Segment Appearance

    The following code example illustrates how to customize the segment appearance.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<%--Customizes the appearance of the connector--%>
    		<ej:DiagramConnector Name="connector1" LineWidth="2" LineColor="green" LineDashArray="2,2" Opacity="0.8">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Decorator Appearance

    The following code example illustrates how to customize the appearance of the decorator.

  • aspx-cs
  • <ej:Diagram ClientIDMode="Static" ID="Diagram" runat="server" Height="600px" Width="100%" >
    	<%--Create Connectors--%>
    	<Connectors>
    		<%--Customizes the appearance of the connector--%>
    		<ej:DiagramConnector Name="connector1" LineWidth="2" LineColor="green" LineDashArray="2,2" Opacity="0.8">
    			<%--Sets source and target points--%>
    			<sourcepoint x="100" y="100"></sourcepoint>
    			<targetPoint x="200" y="200"></targetPoint>
    			<%--Customizes the appearance of the Decorator--%>
    			<TargetDecorator Shape="Arrow" FillColor="red" BorderColor="green" BorderWidth="2" Width="10" Height="10" />
    		</ej:DiagramConnector>
    	</Connectors>
    </ej:Diagram>

    Interaction

    Diagram allows to edit the connectors at runtime. To edit the connector segments at runtime, refer to Connection Editing.

    Constraints

    The Constraints property of connector allows to enable/disable certain features of connectors. For more information about constraints, refer to Connector Constraints.