Line Chart in ASP.NET Webforms Chart

12 Jan 202224 minutes to read

To render a Line Chart, set the series Type as Line in the chart series. To change the line segment color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series.--%>
        <Series>
            <ej:Series Type="Line" Fill="#E94649"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images1

    Click here to view the Line Chart online demo sample.

    Change the line width

    To change the width of the line segment, you can use the Width property in the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change the width of line series--%>
        <Series>
            <ej:Series Width="3"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images2

    Dashed lines

    To render the line series with dotted lines, you can use the DashArray option of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change dash array to display dotted or dashed lines--%>
        <Series>
            <ej:Series DashArray="5,5"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images3

    Changing the line cap

    For customizing the start and end caps of the line segment, you can use the LineCap property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change line cap--%>
        <Series>
            <ej:Series LineCap="Square"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images4

    Changing the line join

    You can use the LineJoin property to specify how two intersecting line segments should be joined.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change line join--%>
        <Series>
            <ej:Series LineJoin="Round"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images5

    MultiColor Line

    You can change the color of the line segments by using the Fill property of the each Points in the series.

  • HTML
  • $("#container").ejChart({
                //   ...
                series: [{
                   //  Change the color of a line 
                    points:[{ fill: 'red' },
                           //  ...         
                    ],
                   //  ...         
                }],
                
                //    ...
    
            });

    Chart-Types_images81

    Click here to view the MultiColor Line Chart online demo sample.

    Step Line Chart

    To render a Step Line Chart, set the series Type as StepLine” in the chart series. To change the StepLine segment color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series.--%>
        <Series>
            <ej:Series Type="StepLine" Fill="#E94649"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images6

    Click here to view the Step Line Chart online demo sample.

    Changing the line width

    To change the line width, you can use the Width property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change the width of step line series--%>
        <Series>
            <ej:Series Width="3"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images7

    Dashed lines

    To render the step line series with dotted lines, you can use the DashArray option of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change dash array to display dotted or dashed lines--%>
        <Series>
            <ej:Series DashArray="5,5"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images8

    Changing the line cap

    For customizing the start and end caps of the line segment, you can use the LineCap property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change line cap--%>
        <Series>
            <ej:Series LineCap="Square"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images9

    Changing the line join

    You can use the LineJoin property to specify how two intersecting line segments should be joined.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change line join--%>
        <Series>
            <ej:Series LineJoin="Round"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images10

    Area Chart

    To render an Area chart, you can specify the series Type as Area in the chart series. To change the Area color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="Area" Fill="#69D2E7"></ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images11

    Click here to view the Area Chart online demo.

    Range Area Chart

    To render a Range Area Chart, set the Type as RangeArea in the chart series. To change the RangeArea color, you can use the Fill property of the series.

    Since the RangeArea series requires two y values for a point, you have to add the High and Low value. High and Low value specifies the maximum and minimum range of the points.

    • When you are using the Points option, specify the high and low values by using the High and Low option of the point.

    • When you are using the DataSource option to assign the data, map the fields from the dataSource that contain High and Low values by using the Series.High and Series.Low options.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="RangeArea" Fill="Indigo">
                <Points>
                    <%--Use High and Low values instead of Y--%>
                    <ej:Points X="1935" High="80" Low="70"></ej:Points>
                    <%--...--%>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images12

    Click here to view Range Area Chart online demo.

    Step Area Chart

    To render a Step Area Chart, set the Type as StepArea in the chart series. To change the StepArea color, you can use the Fill property of the series.

  • JS
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="StepArea" Fill="#69D2E7">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images13

    Click here to view Step Area Chart online demo.

    Spline Area Chart

    To render a Spline Area Chart, set the Type as SplineArea in the chart series. To change the SplineArea color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="SplineArea" Fill="#C4C24A">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images14

    Click here to view Spline Area Chart online demo.

    Stacked Area Chart

    To render a Stacked Area Chart, set the Type as StackingArea in the chart series. To change the StackingArea color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="StackingArea" Fill="#69D2E7">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images15

    Click here to view Stacked Area Chart online demo.

    100% Stacked Area Chart

    To render a 100% Stacked Area Chart, set the Type as StackingArea100 in the chart series. To change the StackingArea100 color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="StackingArea100" Fill="#C4C24A">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images16

    Click here to view 100% Stacked Area Chart online demo.

    Column Chart

    To render a Column Chart, set the Type as Column in the chart series. To change the color of the column series, you can use the Fill property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="Column" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images17

    Click here to view Column Chart demo.

    Change a point color

    You can change the color of a column by using the Fill property of the point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                    <ej:Points Fill="skyblue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images18

    Column width customization

    Width of any column type series can be customized by using the ColumnWidth property. Default value of ColumnWidth is 0.7. Value ranges from 0 to 1. Here 1 corresponds to 100% of available width and 0 corresponds to 0% of available width.

    NOTE

    Width of a column also depends upon the ColumnSpacing property, because ColumnSpacing will reduce the space available for drawing a column. This is also applicable for StackingColumn, StackingColumn100, Bar, StackingBar, StackingBar100, RangeColumn, HiLo, HiLoOpenClose, Candle and Waterfall charts.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">
    		<Series>
    			<ej:Series ColumnWidth = "0.8">            
    			</ej:Series>
    		</Series>
    	</ej:Chart>

    Chart-Types_images86

    Column with rounded corners

    Corners of the column chart can be customized by setting value to the CornerRadius property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">
         <CommonSeriesOptions CornerRadius="20" />
        </ej:Chart>

    Chart-Types_images88

    Spacing between column series

    Spacing between column type series can be customized using the ColumnSpacing property. Default value of ColumnSpacing is 0. Value ranges from 0 to 1. Here 1 corresponds to 100% available space and 0 corresponds to 0% available space.

    NOTE

    Space between columns will also affect the width of the column. For example, setting 20% spacing and 100% width will render columns with 80% of total width. This is also applicable for StackingColumn, StackingColumn100, Bar, StackingBar, StackingBar100, RangeColumn, HiLo, HiLoOpenClose, Candle and Waterfall charts.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">
    		<Series>
    			<ej:Series ColumnWidth = "0.2">            
    			</ej:Series>
    		</Series>
    	</ej:Chart>

    Chart-Types_images87

    Cylindrical Chart

    To render a cylindrical chart, set the ColumnFacet property as “Cylinder” in the chart series along with the series type.

    The following chart types can be rendered as cylinder in both 2D and in 3D view.

    • Column Chart, Bar Chart, Stacked Column Chart, Stacked Bar Chart, 100% Stacked Column Chart, 100% Stacked Bar Chart.
  • HTML
  • <ej:Chart ID="Chart2" runat="server"> 
          <%-- To change the shape of the series--%>
          <Series>
              <ej:Series Type="Column" ColumnFacet="Cylinder">
              </ej:Series>
          </Series>
       </ej:Chart>

    Chart-Types_images89

    RangeColumn Chart

    To render a Range Column Chart, set the Type as RangeColumn in the chart series. To change the RangeColumn color, use the Fill property of the series.

    Since, the RangeColumn series requires two y values for a point, add the High and Low value. High and Low value specifies the maximum and minimum range of the points.

    • When you are using the Points option, specify the high and low values by using the High and Low option of the point.

    • When you are using the DataSource option to assign the data, you have to map the fields from the dataSource that contains high and low values by using the Series.High and Series.Low) options.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="RangeColumn" Fill="#E94649">
                <Points>
                    <%--Use high and low values instead of y--%>
                    <ej:Points High="6.1" Low="0.7"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images19

    Click here to view Range Column Chart online demo.

    Change a point color

    To change the color of a range column, you can use the Fill property of point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                    <%--change a point color of Range column--%>
                    <ej:Points Fill="skyblue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images20

    Stacked Column Chart

    To render a Stacked Column Chart, set the Type as StackingColumn in the chart series. To change the StackingColumn color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Change type and color of the series--%>
        <Series>
            <ej:Series Type="StackingColumn" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images21

    Click here to view Stacked Column Chart online demo.

    Cluster / Group stacked columns

    You can use the StackingGroup property to group the stacked columns. Columns with same group name are stacked on top of each other.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">
        <Series>
            <%--For grouping stacked columns--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
            <%--For grouping stacked columns--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images22

    Change a point color

    To change the color of a stacking column, you can use the Fill property of the point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <%--change a point color of Stacking column--%>
                <Points>
                    <ej:Points Fill="skyBlue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images23

    100% Stacked Column Chart

    To render a 100% Stacked Column Chart, set the Type as StackingColumn100 in the chart series. To change the StackingColumn100 color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change type and color of the series--%>
            <ej:Series Type="StackingColumn100" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images24

    Click here to view 100% Stacked Column Chart online demo.

    Cluster / Group 100% stacked columns

    By using the StackingGroup property, you can group the 100% stacking columns. Columns with same group name are stacked on top of each other.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--For grouping 100% stacked columns--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
              <%--For grouping 100% stacked columns--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images25

    Change a point color

    To change the color of a 100% stacking column, you can use the Fill property of the point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                 <%--change a point color of 100% Stacking column--%>
                    <ej:Points Fill="skyBlue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images26

    Bar Chart

    To render a bar Chart, set the Type as Bar in the chart series. To change the bar color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change type and color of the series--%>
            <ej:Series Type="Bar" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images27

    Click here to view Bar Chart demo.

    Change the color of a bar

    By using the Fill property of the point, you can change the specific point of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                    <%--change a point color of bar--%>
                    <ej:Points Fill="skyblue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images28

    Stacked Bar Chart

    To render a Stacked Bar Chart, set the Type as StackingBar in the chart series. To change the StackingBar color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change type and color of the series--%>
            <ej:Series Type="StackingBar" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images29

    Click here to view Stacked Bar Chart online demo.

    Cluster / Group stacked bars

    You can use the StackingGroup property to group the stacking bars with the same group name.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--For grouping stacking bar--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
            <%--For grouping stacking bar--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images30

    Change a point color

    You can change the color of a stacking bar by using the Fill property of the point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                    <%--change a point color of stacking bar--%>
                    <ej:Points Fill="skyblue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images31

    100% Stacked Bar Chart

    To render a 100% Stacked Bar Chart, set the Type as StackingBar100 in the chart series. To change the StackingBar100 color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change type and color of the series--%>
            <ej:Series Type="StackingBar100" Fill="#E94649">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images32

    Click here to view 100% Stacked Bar Chart online demo.

    By using the StackingGroup property, you can group the 100% stacking bars with the same group name.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--For grouping 100% stacking bar--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
            <%--For grouping 100% stacking bar--%>
            <ej:Series StackingGroup="GroupOne">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images33

    Change a point color

    To change the color of a 100% stacking bar, you can use the Fill property of the point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series>
                <Points>
                    <%--change a point color of 100% stacking bar--%>
                    <ej:Points Fill="skyblue"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images34

    Spline Chart

    To render a Spline Chart, set the Type as Spline in the chart series. To change the Spline segment color, you can use the Fill property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change type and color of the series--%>
            <ej:Series Type="Spline" Fill="#6ADCB0">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images35

    Click here to view the Spline Chart online demo sample.

    Change the spline width

    To change the spline segment width, you can use the Width property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change the width of spline series--%>
            <ej:Series Width="3">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images36

    Dashed lines

    To render the spline series with dotted lines, you can use the DashArray option of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change dash array to display dotted or dashed splines--%>
            <ej:Series DashArray="5,5">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images37

    Pie Chart

    You can create a pie chart by setting the series Type as Pie in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Pie">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images38

    Click here to view the Pie chart online demo sample.

    Change the pie size

    You can use the PieCoefficient property to change the diameter of the Pie chart with respect to the plot area. It ranges from 0 to 1 and the default value is 0.8.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change pie chart coefficient value--%>
            <ej:Series PieCoefficient="0.4f">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images39

    Explode a pie segment

    You can explode a pie segment on the chart load by using the ExplodeIndex of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set point index value to explode the pie segment--%>
            <ej:Series ExplodeIndex="1">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images40

    Explode all the segments

    To explode all the segments of the Pie chart, you can enable the ExplodeAll property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable explodeAll property for pie chart--%>
            <ej:Series ExplodeAll="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images41

    Explode a pie segment on mouse over

    To explode a pie segment on a mouse over, you can enable the Explode property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable pie explode option on mouse over the chart --%>
            <ej:Series Explode="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images42

    Sector of Pie

    EjChart allows you to render all the data points/segments in the semi-pie, quarter-pie or in any sector by using the StartAngle and EndAngle options.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set startAngle and endAngle to draw the semi pie chart--%>
            <ej:Series Type="Pie" StartAngle="-90" EndAngle="90">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images43

    Click here to view the Semi Pie Chart online demo sample.

    Doughnut Chart

    To create a Doughnut chart, you can specify the series Type as Doughnut in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Doughnut">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images44

    Click here to view the Doughnut Chart online demo sample.

    Change Doughnut inner radius

    You can change the doughnut chart inner radius by using the DoughnutCoefficient with respect to the plot area. It ranges from 0 to 1 and the default value is 0.4.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change doughnut chart coefficient value--%>
            <ej:Series DoughnutCoefficient="0.6f">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images45

    Change the doughnut size

    You can use the DoughnutSize property to change the diameter of the Doughnut chart with respect to the plot area. It ranges from 0 to 1 and the default value is 0.8.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change doughnut chart coefficient value--%>
            <ej:Series DoughnutSize="0.4f">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images46

    Explode a doughnut segment

    To explode a specific doughnut segment, set the index to be exploded by using the ExplodeIndex option of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set point index value to explode the doughnut segment--%>
            <ej:Series ExplodeIndex="1">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images47

    Explode all the segments

    To explode all the segments, you can enable the ExplodeAll property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable explodeAll property of doughnut chart--%>
            <ej:Series ExplodeAll="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images48

    Explode a doughnut segment on mouse over

    To explode a doughnut segment on a mouse over, you can enable the Explode property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable doughnut explode option on mouse over the chart--%>
            <ej:Series Explode="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images49

    Sector of Doughnut

    EjChart allows you to render all the data points/segments in the semi-doughnut, quarter- doughnut or in any sector by using the StartAngle and EndAngle options.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set startAngle and endAngle to draw the semi doughnut chart--%>
            <ej:Series Type="Doughnut" StartAngle="-90" EndAngle="90">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images50

    Click here to view the Semi Doughnut Chart online demo sample.

    Multiple Pie Chart

    EjChart provides support to render more than one series in pie and in doughnut chart. Radius of each series is calculated based on the radius of the previous series. And in addition legend is displayed according to the list of chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">
                <Series>
                    <%--Adding multiple pie series--%>
                    <ej:Series Type="Pie">
                        <%--....--%>
                    </ej:Series>                
                    <ej:Series Type="Pie">
                        <%--....--%>
                    </ej:Series>
                </Series>            
            </ej:Chart>

    Multiple Pie

    Chart-Types_images82

    Multiple Doughnut

    Chart-Types_images83

    Click here to view the Multiple Pie chart online demo sample.

    Start and End Angle Support

    In the Multiple Pie chart, the start and end angle property is also supported.

    Sector of Multiple Pie

    Chart-Types_images84

    Sector of Multiple Doughnut

    Chart-Types_images85

    Pyramid Chart

    To create a Pyramid chart, you can specify the series Type as Pyramid in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Pyramid">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images51

    Click here to view the Pyramid Chart online demo sample.

    Pyramid Mode

    Pyramid mode has two types, Linear and Surface respectively. The default PyramidMode type is “Linear”.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change pyramid mode--%>
            <ej:Series PyramidMode="Surface">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images52

    Gap between the segments

    You can control the gap between the segments by using the GapRatio option of the series. Its ranges from 0 to 1.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set gapRatio value to pyramid chart--%>
            <ej:Series GapRatio="0.1f">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images53

    Explode a pyramid segment

    You can explode a pyramid segment on the chart load by using the ExplodeIndex of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set point index value to explode the pyramid segment--%>
            <ej:Series ExplodeIndex="4">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images54

    Funnel Chart

    You can create a funnel chart by setting the series Type as Funnel in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Funnel">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images55

    Click here to view the Funnel Chart online demo sample.

    Change the funnel width and height

    Funnel segments height and width is calculated from the chart size, by default. You can change this height and width directly without changing the chart size by using the FunnelHeight and FunnelWidth property of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change funnel height and width--%>
            <ej:Series FunnelHeight="22%" FunnelWidth="25%">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images56

    Explode a funnel segment

    You can explode a funnel segment on the chart load by using the ExplodeIndex of the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set point index value to explode the funnel segment--%>
            <ej:Series ExplodeIndex="3">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images57

    Bubble Chart

    To create a Bubble chart, you can set the series Type as Bubble in the chart series. Bubble chart requires 3 fields (X, Y and Size) to plot a point. Here, Size is used to specify the size of each bubble segment.

  • CSHARP
  • public partial class _Default : Page
        {
            protected void Page_Load(object sender, EventArgs e)
            {
                List<ChartData> data = new List<ChartData>();
                data.Add(new ChartData("Jan", 35, 1.34));
                data.Add(new ChartData("Feb", 28, 1.05));
                data.Add(new ChartData("Mar", 34, 0.45));
                data.Add(new ChartData("Apr", 32, 1.10));            
    
                //Binding DataSource to Chart
                this.Chart1.DataSource = data;
                this.Chart1.DataBind();
               
            }
        }
    
        [Serializable]
        public class ChartData
        {
            public string Month;
            public double Sales;
            public double Profit;
            public ChartData(string month, double sales, double profit)
            {
                this.Month = month;
                this.Sales = sales;
                this.Profit = profit;
            }
        }
  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Set chart type to series--%>
        <Series>        
            <%--Add datasource and set xName, yName and size to bubble chart--%>
            <ej:Series Type="Bubble" XName="Month" YName="Sales" Size="Profit">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images58

    Click here to view the Bubble Chart online demo sample.

    Scatter

    To create a Scatter chart, you can set the series Type as Scatter in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <%--Set chart type to series--%>
        <Series>
            <ej:Series Type="Scatter" XName="Month" YName="Sales" Size="Profit">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images59

    Click here to view the Scatter Chart online demo sample.

    Customize the scatter chart

    You can change the scatter size by using the Size property of the series marker. And you can change the scatter color by using the series Fill property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set fill color to scatter series--%>
            <ej:Series Fill="#41F282">
                <%--Change scatter size--%>
                <Marker>
                    <Size Width="15" Height="15" />
                </Marker>
            </ej:Series>
        </Series>
    </ej:Chart>

    ASPNET Scatter Chart Types

    HiLoOpenClose Chart 

    To create a HiLoOpenClose chart, you can set the series Type as HiloOpenClose in the chart series. HiLoOpenClose chart requires 5 fields (X, High, Low, Open and Close) to plot a segment.

  • CSHARP
  • public partial class _Default : Page
        {
            protected void Page_Load(object sender, EventArgs e)
            {
                List<ChartData> data = new List<ChartData>();
                data.Add(new ChartData("Jan", 38, 10, 38, 29));
                data.Add(new ChartData("Feb", 28, 15, 18, 27));
                data.Add(new ChartData("Mar", 54, 35, 38, 49));
                data.Add(new ChartData("Apr", 52, 21, 35, 29));            
    
                //Binding DataSource to Chart
                this.Chart1.DataSource = data;
                this.Chart1.DataBind();
               
            }
        }
    
        [Serializable]
        public class ChartData
        {
            public string Month;
            public double High;
            public double Low;
            public double Open;
            public double Close;
            public ChartData(string month, double high, double low, double open, double close)
            {
                this.Month = month;
                this.High = high;
                this.Low = low;
                this.Open = open;
                this.Close = close;
            }
        }
  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type and map dataSource field to series--%>
            <ej:Series Type="HiloOpenClose" XName="Month" High="High" Low="Low" Open="Open" Close="Close">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images61

    Click here to view the HiLoOpenClose Chart online demo sample.

    DrawMode

    You can change the HiLoOpenClose chart DrawMode to Open, Close or Both. The default value of DrawMode is Both.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change the OHLC drawMode type--%>
            <ej:Series DrawMode="Open">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images62

    Bull and Bear Color

    HiLoOpenClose chart BullFillColor is used to specify a fill color for the segments that indicates an increase in stock price in the measured time interval and BearFillColor is used to specify a fill color for the segments that indicates a decrease in the stock price in the measured time interval.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change bullFill and bearFill color of hiloopenclose chart--%>
            <ej:Series BearFillColor="#FF6600" BullFillColor="#336600">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images63

    Candle

    You can create a Candle chart by specifying the series Type as Candle in the chart series. Candle chart requires 5 fields (X, High, Low, Open and Close) to plot a segment.

  • CSHARP
  • public partial class _Default : Page
        {
            protected void Page_Load(object sender, EventArgs e)
            {
                List<ChartData> data = new List<ChartData>();
                data.Add(new ChartData("Jan", 38, 10, 38, 29));
                data.Add(new ChartData("Feb", 28, 15, 18, 27));
                data.Add(new ChartData("Mar", 54, 35, 38, 49));
                data.Add(new ChartData("Apr", 52, 21, 35, 29));            
    
                //Binding DataSource to Chart
                this.Chart1.DataSource = data;
                this.Chart1.DataBind();
               
            }
        }
    
        [Serializable]
        public class ChartData
        {
            public string Month;
            public double High;
            public double Low;
            public double Open;
            public double Close;
            public ChartData(string month, double high, double low, double open, double close)
            {
                this.Month = month;
                this.High = high;
                this.Low = low;
                this.Open = open;
                this.Close = close;
            }
        }
  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type and map dataSource field to series--%>
            <ej:Series Type="Candle" XName="Month" High="High" Low="Low" Open="Open" Close="Close">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images64

    Click here to view the Candle Chart online demo sample.

    Bull and Bear Color

    Candle chart BullFillColor is used to specify a fill color for the segments that indicates an increase in the stock price in the measured time interval and BearFillColor is used to specify a fill color for the segments that indicates a decrease in the stock price in the measured time interval.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change bullFill and bearFill color of candle chart--%>
            <ej:Series BearFillColor="#FF6600" BullFillColor="#336600">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images65

    HiLo

    HiLo chart is created by setting the series Type as Hilo in the chart series. HiLo chart requires 3 fields (X, High and Low) to plot a segment.

  • CSHARP
  • public partial class _Default : Page
        {
            protected void Page_Load(object sender, EventArgs e)
            {
                List<ChartData> data = new List<ChartData>();
                data.Add(new ChartData("Jan", 38, 10));
                data.Add(new ChartData("Feb", 28, 15));
                data.Add(new ChartData("Mar", 54, 35));
                data.Add(new ChartData("Apr", 52, 21));            
    
                //Binding DataSource to Chart
                this.Chart1.DataSource = data;
                this.Chart1.DataBind();
               
            }
        }
    
        [Serializable]
        public class ChartData
        {
            public string Month;
            public double High;
            public double Low;
            public double Open;
            public double Close;
            public ChartData(string month, double high, double low)
            {
                this.Month = month;
                this.High = high;
                this.Low = low;
            }
        }
  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type and map dataSource field high, low to series--%>
            <ej:Series Type="Hilo" XName="Month" High="High" Low="Low">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images66

    Click here to view the HiLo Chart online demo sample.

    Polar

    Polar chart is created by setting the series Type as Polar in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Polar">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images67

    Click here to view the Polar Chart online demo sample.

    DrawType

    Polar DrawType property is used to change the series plotting type to Line, Column or Area. The default value of DrawType is Line.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change polar series drawType--%>
            <ej:Series DrawType="Column">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images68

    Stack columns in Polar chart

    By using the IsStacking property, you can specify whether the column has to be stacked when the DrawType is column. Its default value is false.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable isStacking property for stacked column polar chart--%>
            <ej:Series IsStacking="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images69

    Click here to view the Polar Wind Rose Chart online demo sample.

    Radar Chart

    To create a Radar chart, you can specify the series Type as Radar in the chart series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Set chart type to series--%>
            <ej:Series Type="Radar">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images70

    Click here to view the Radar Chart online demo sample.

    DrawType

    Radar DrawType property is used to change the series plotting type to Line, Column or Area. The default value of DrawType is Line.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change radar series drawType--%>
            <ej:Series DrawType="Column">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images71

    Stack columns in Radar chart

    By using the IsStacking property, you can specify whether the column has to be stacked when the DrawType is set as Column. Its default value is set to false.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Enable isStacking property for stacked column radar chart--%>
            <ej:Series IsStacking="true">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images72

    Waterfall Chart

    For rendering a Waterfall chart, set series Type as Waterfall in the chart series. To change the waterfall series segment color use Fill option of series and use PositiveFill property to differentiate the positive segments.

    NOTE

    The inline property of the Series.PositiveFill has the first priority and override the Series.Fill.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <%--Change series type--%>
            <ej:Series Type="Waterfall" Fill="#C64E4A" PositiveFill="#93C952">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images73

    Click here to view the Waterfall Chart online demo sample.

    ShowIntermediateSum

    To display the summary of values since the last intermediate point of the waterfall series, set ShowIntermediateSum property as true in the specific point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series Type="Waterfall">
                <Points>
                    <%--Enable showIntermediateSum in to a point--%>
                    <ej:Points X="Intermediate sum" ShowIntermediateSum="true"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    ShowTotalSum

    The sum of all previous point in the waterfall series is displayed on enabling the ShowTotalSum property for a specific point.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series Type="Waterfall">
                <Points>
                    <%--Enable showTotalSum in to a point--%>
                    <ej:Points X="Total sum" ShowTotalSum="true"></ej:Points>
                </Points>
            </ej:Series>
        </Series>
    </ej:Chart>

    ConnectorLine

    To customize the connector line color, width, opacity and dashArray of the waterfall series, you can use ConnectorLine option of series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server"> 
        <Series>
            <ej:Series Type="Waterfall">
                <ConnectorLine Color="#333000" DashArray="2,3" Width="1" Opacity="1" />
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images74

    ErrorBar Chart

    EjChart can generate Error bar for Cartesian type series (Line, Column, Bar, Scatter, Area, Candle, HiLo, etc.). To render the Error bar for the series, set Visibility as “Visible” to ErrorBar in the series.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">  
          <Series>
                    <ej:Series>
                         <%-- To toggle the error bar visibility --%>
                        <ErrorBar Visible="visible"></ErrorBar>
                    </ej:Series>
                </Series>
    </ej:Chart>

    Chart-Types_images75

    Click here to view the ErrorBar Chart online demo sample.

    Changing Error Bar Type

    You can change the error bar rendering type using Type (like FixedValue, Percentage, StandardDeviation, StandardError and Custom) option of errorBar. To change the error bar line length you can use VerticalErrorValue property.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">  
          <Series>
                    <ej:Series>
                         <%-- To change the error bar type --%>
                        <ErrorBar Type="Percentage VerticalErrorValue="3" ></ErrorBar>
                    </ej:Series>
                </Series>
    </ej:Chart>

    Chart-Types_images76

    Customizing error bar type

    To customize the error bar type, set error bar Type as Custom and then change the horizontal/vertical positive and negative value of error bar.

  • JS
  • <ej:Chart ID="Chart1" runat="server">  
        <Series>
              <ej:Series>
                  <%-- To change the error bar type --%>
                  <ErrorBar Type="Custom” VerticalPositiveErrorValue="5" 
                          HorizontalPositiveErrorValue="1" VerticalNegativeErrorValue="5" 
                               HorizontalNegativeErrorValue="1" ></ErrorBar>
              </ej:Series>
         </Series>
    </ej:Chart>

    Chart-Types_images77

    Changing Error Bar Mode

    Error bar mode is used to define whether the error bar line has to be drawn Horizontally, Vertically or in Both side. To change the error bar mode use ErrorBar.Mode option.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">  
          <Series>
              <ej:Series>
                 <%-- To change the error bar mode --%>
                 <ErrorBar Type="FixedValue” Mode="Vertical" ></ErrorBar>
              </ej:Series>
          </Series>
    </ej:Chart>

    Chart-Types_images78

    Changing Error Bar Direction

    You can change the error bar direction to Plus, Minus or Both side using ErrorBar.Directions option.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">  
        <Series>
            <ej:Series>
               <%-- To change the error bar direction --%>
               <ErrorBar Type="FixedValue” Mode="Vertical" Direction=”Minus”> </ErrorBar>
            </ej:Series>
         </Series>
    </ej:Chart>

    Chart-Types_images79

    Customizing Error bar cap

    To customize the errorBar cap visibility, length, width and fill color, you can use Cap option in the Series.ErrorBar.

  • HTML
  • <ej:Chart ID="Chart1" runat="server">  
          <Series>
             <ej:Series>
                  <%-- To customize the error bar cap --%>
                  <ErrorBar>
                      <Cap Visible="true" Length="20" Width="1" Fill="#000000" />    
                      </ErrorBar>
             </ej:Series>
          </Series>
    </ej:Chart>

    Chart-Types_images80

    Box and Whisker Chart

    To render a Box and Whisker Chart, set the series type as BoxAndWhisker .Box and Whisker chart requires2 fields (x and y) to plot a segment. The field y requires n number of data or it should contain minimum of five values to plot a segment.

  • HTML
  • public partial class _Default : Page
       {
            protected void Page_Load(object sender, EventArgs e)
            {
                List<BoxPlotData> data = new List<BoxPlotData>();
                Double[] y1 = {22,22,23,25,25,25,26,27,27,28,28,29,30,32,34,32,34,36,35,38};
                Double[] y2 = {22,33,23,25,26,28,29,30,34,33,32,31,50};
                Double[] y3 = {22,24,25,30,32,34,36,38,39,41,35,36,40,56};
                Double[] y4 = {26,27,28,30,32,34,35,37,35,37,45};
                Double[] y5 = {26,27,29,32,34,35,36,37,38,39,41,43,58 };
                data.Add(new BoxPlotData("Development", y1));
                data.Add(new BoxPlotData("Testing", y2));
                data.Add(new BoxPlotData("HR", y3));
                data.Add(new BoxPlotData("Finance", y4));
                data.Add(new BoxPlotData("R&D", y5));
    
                //Binding Datasource to Chart
                this.Chart1.DataSource = data;
                this.Chart1.DataBind();          
    
            }
           }
        [Serializable]
        public class BoxPlotData
        {
            public BoxPlotData(string xVal,Double[] yValue)
            {
                this.XValue = xVal;
                this.YValue1 = yValue;
                
            }
            public string XValue
            {
                get;
                set;
            }
            public Double[] YValue1
            {
                get;
                set;
            }
           
        }
  • HTML
  • <ej:Chart ID="Chart2" runat="server"> 
        <Series>
            <%--Set chart type and map dataSource to series--%>
            <ej:Series Type="BoxAndWhisker" XName="XValue" YName="YValue1">
            </ej:Series>
        </Series>
    </ej:Chart>

    Chart-Types_images90

    BoxPlotMode

    You can change the rendering mode of the Box and Whisker series using the BoxPlotMode property. The default value of BoxPlotMode is “exclusive”.The other BoxPlotModes available are inclusive and normal.

  • HTML
  • <Series>
        <ej:Series BoxPlotMode="Inclusive">            
           </ej:Series>
    </Series>

    ShowMedian

    Box and Whisker showMedian property is used to show the box and whisker average value. The default value of showMedian is false.

  • HTML
  • <Series>
          <ej:Series ShowMedian="true">            
           </ej:Series>
    </Series>

    Chart-Types_images91

    Customize the Outlier

    Outlier symbol, width and height can be customized using outlierSettings through outlierSettings property. By default Outlier symbol is displayed as circle with a height and width of 6 pixels.

  • HTML
  • <Series>
          <ej:Series>
                <OutlierSettings Shape = “Triangle”>
                    <Size Height="10" Width="10" />
                </OutlierSettings>            
           </ej:Series>
    </Series>

    Chart-Types_images92

    Click here to view the Box and Whisker Chart online demo sample.

    Pie Of Pie Chart

    To render the pie of pie chart, set the series type as PieOfPie. Pie of pie chart is used for displaying the data of a pie slice as another pie chart. The values in the second pie is displayed based on the splitMode property.

  • HTML
  • <Series>
    <ej:Series  SplitValue="10" GapWidth="100" Type="PieOfPie">
    <Points>
    <ej:points Text="58%" X="Saudi Arabia" Y="58" />
    <ej:points Text="15%" X="Persian Gulf" Y="15"/>
    <ej:points Text="13%" X="Canada" Y="13"/>
    <ej:points Text="8%" X="Venezuela" Y="8"/>
    <ej:points Text="3%" X="Mexico" Y="3"/>
    <ej:points Text="2%" X="Russia" Y="2"/>
    <ej:points Text="1%" X="Russia" Y="1"/>
    </Points>
    </ej:Series>
    </Series>

    Chart-Types_images93

    Click here to view the Pie Of Pie Chart online demo sample.

    Split Mode and Split Value

    The points to be displayed in the second pie is decided based on the SplitMode property.SplitMode property takes the following values.

    • Position – Have to split the data points based on its position
    • Value – Have to split the data points based on its Y value
    • Percentage – Have to split the points based on the percentage value
    • Indexes – The data points with the specified indexes are split separately
      By default, the splitMode is set to Value.
  • HTML
  • <Series>
    <ej:Series  SplitValue="3" SplitMode="Position">
    </ej:Series>
    </Series>

    Chart-Types_images94

    Changing Pie Of Pie Size

    The size of the second Pie can be customized by using the PieOfPieCoefficient property. The default value of pieOfPieCoefficient is 0.6.Its value ranges from 0 to 1.

  • HTML
  • <Series>
    <ej:Series PieOfPieCoefficient="1">
    </ej:Series>
    </Series>

    The following screenshot represents the pie of pie series with pieOfPieCoefficient as 1

    Chart-Types_images95

    Customizing the Gap

    The distance between the two pies in the pie of pie chart can be controlled by using the GapWidth property. The default value is 50.

  • HTML
  • <Series>
          <ej:Series GapWidth="150">
                     
           </ej:Series>
    </Series>

    Chart-Types_images96